Tender For Repair And Renovation Of Chemistry Lab At Govt. Ripudaman College Nabha, nabha-Punjab

Repair And Renovation Of Chemistry Lab At Govt. Ripudaman College Nabha--- 1 Dismantling Brick Work Tile, Masonry Or Tile Lining In Cement 2 Scraping White Wash And Colour Wash 3 Scraping Of Cement Plaster 4 Preparation Of Plastered Or Concrete Surface For Painting ( Including Sand Papering The Surface ) Using Ready Mixed Cement Based Wall Putty By Applying Two Or More Coats To Get Required Finish 5 Distempering With Acrylic Washable Oil Bound Distemper ( Of Approved Manufacture ) Two Or More Coats Over One Priming Coat To Give An Even Shade 6 Painting Two Or More Coats Excluding Priming Coat With Synthetic Enamel Paint In All Shades On Wood Work, Metallic Or Plastered, Concrete Surface To Give An Even Shade. 7 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicon Additives Of Required Shade With Two Or More Coats Applied @ 1.43Litre / 10 Sqm Over And Including Base Coat Of Water Proofing Cement Paint Applied @ 2.20 Kg / 10 Sqm 8 20Mm Thick Cement Plaster 1:4 In Two Coat Work 9 Chowkats Of Commercial Hard Wood Such As Hollock Confirming To Isi Specification No 1003 M Kiln Seasoned Of Doors And Windows Including Iron Hold Fasts, Corner Straps Cleats, Stops, Bolts For Hold Fasts Etc, Complete Fixed In Position ( Section 60Mm X 150Mm ) Double Rebate 10 Hollock Wood Doors Shutter Windows Shutter Including Hinges, Screws, Chocks, Cheats, Stops Cords Etc. Complete Fixed In Position. 35 Mm Thick 11 Cost Of Aluminum Fittings Complete For Doors, Windows Such As Tower Bolts, Handles, Stoppers And Screw Etc. For These Fittings ( Excluding Sliding Bolt ) For Shutter Area Above 0.50 Sqm 12 Providing And Fixing Hydraulic Door Closer Isi Mark With Necessary Screw Etc. Complete I.S.I Designation No. Iii ( Size Of Door 851Mm To 1000Mm ) 13 Wrought Iron & Mild Steel Ladders, Framed Grills, Gratings Etc. With Ends Of Bars Riveted Or Molded Forged Framed Window Guards, Barred Iron Doors Stair Case Iron Railing Etc. Including Cost Of Bolts And Nuts, Screws, Welding Rod Complete Fixing In Position 14 Providing And Fixing Bright Finished Brass 100 Mm Mortise Latch And Lock With 6 Levers And A Pair Of Lever Handles With Necessary Screws Etc. Complete ( Best Make Of Approved Quality ) . 15 Providing And Fixing Beading To Door And Windows Chowkats Of Commercial Hard Wood, Such As Hollock, Champ, Chirassy Chaplash Etc ( Non Coniferous Timber Other Than Teak Conforming To Isi Specification No 100., Kiln Seasoned ) With Iron Screws, Fixed In Position Complete As Per Design And Shape Required. 50Mmx12mm 16 Applying Pink Primer Or Aluminum Priming Coat On Wood Work Including Preparation Of Surface Knotting And Stopping Etc. And Painting Two Or More Coats Excluding Priming Coat With Synthetic Enamel Paint In All Shades On Wood Work, Metallic Or Plastered, Concrete Surface To Give An Even Shade. 17 Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles Matt / Semi Matt / Glosy / Highly Gloss Finish / Highlighter / Emboss Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Size 250 X 330 Mm & 300X300mm As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement: 4 Fine Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete 18 Providing And Fixing Name Plates Of Various Sizes Made Of Pvc Sheet Printed With Self Adhesive Tape Pasted On Sunboard Complete As Desired By Engineer-In-Charge 19 Renewing Glass Panes With Putty And Nails Wherever Necessary Glass Panes Weighing 10.75 Kg / Sqm 20 First Class Burnt Brick Work Laid In Cement Sand Mortar 1:5 In First Storey Upto 4 Metres Above Plinth Level. 21 Providing And Fixing In Position Vitreous Chinaware White Laboratory Sinks Of Approved Make ( To The Approval Of Engineer In-Charge ) Consisting Of A Pair Of Brackets, C.P. Brass Waste 40Mm Complete In All Respect.Size 450 Mm X 300 Mm X 150 Mm 22 Providing, Laying In Trenches To Correct Gradient And Alignment And Jointing Of Upvc Pipes Having Isi Specification Is:15328-2003 Class-Sn-8 Marked Make Supreme, Finolex, Kissan, Jain, Prince Or Equivalent Good On Them And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting And Jointing, Testing For Water Tightness And Making Good The Leakages And Defects Including Cost Of Specials ( Specials And Solvent Should Be Of Same Make As That Of Pipes ) Complete In All Respects. 110Mm O / D Pipe 23 Kota Stone Slab 20-25 Mm Thick Flooring Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) : 24 Mirror Polishing On Marble Work / Granite Work / Stone Work Where Ever Required To Give High Gloss Finish Complete 25 Centering And Shuttering For Sides And Soffits Of Beam, Beams, Launching Girders, Bressumers, Lintels. 26 Centering And Shuttering For Flat Surfaces Such As Suspended Floors, Roofs, Landings, Chajjas, Shelves Etc 27 Reinforced Cement Concrete M-25 Mechanically Batch Mixed Using Batch Type Concrete Mixer As Per Is:1791 And Vibrated By Needle Vibrator But Excluding Steel Reinforcement Centring And Shuttering In Foundation And Plinth 28 Cold Twisted Detormed ( Ribbed / Tor Steel ) Bars ( Fe 500 Grade As Per Is 1786-2008 ) , For R.C.C Works, Where Not Including In The Complete Rate Of Rcc Including Bending And Binding Placing In Position Complete 29 Cement Concrete 1:4:8 With Brick Balast 40Mm Gauge Mixing By Mechanical Means Using Concrete Mixer Volumetric Type 30 Conglomerate Floor 50Mm Thick Cement Concrete Topping 1:2:4 Using Mechanical Mixer For Mixing Of Material 31 Providing And Laying Polished Granite Stone 18 Mm Thick Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matchingshade Including Rubbing , Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. Polished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. 32 Providing And Laying Vitrified Floor Tiles In Different Sizes In Light Colour Shades Made Using Full Body Technology ( Thickness To Be Specified By The Manufacturer ) With Water Absorption’S Less Than 0.08% And Conforming To Is : 15622 Of Approved Make In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement: 4 Fine Sand ) , Complete. ( Full Body Vitrified Tiles Have Pigment In Entire Body / Thickness Of Tile Which Makes Chips And Scratches Less Noticeable And Make Na Ideal Choice For High Traffic Zones. ) Size 600X600 Mm 33 Wire Gauge Fixed On Chowkats With 25Mm Thick Hollock Wood Cover Molding Of Full Width. 34 Repairs To Plaster In Patches Of Area 2.5 Sqm And Under Including Cutting The Patch In Proper Shape And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead.With Cement Mortar 1:4 ( 1 Cement: 4 Sand ) Taking Area 2.5 Sqm 35 Plastering On Underside Of Ceiling 10Mm Thick Cement Plaster 1:4 36 Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Conforming To Is: 733 And Is : 1285 Of Jindal, Hindalco, Mahavir Or Equivalent Make Approved By Engineer In Charge , Fixed With Rawl Plugs And Screws Or With Fixing Clips, Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions, At Top, Bottom And Sides With Required Pvc Plug / Neoprene Felt Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Mitered And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing / Paneling, C.P.Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In Charge. ( Glazing And Paneling To Be Paid For Separately ) : For Fixed Portion And Chawkhats 37 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Labour For Fixing Of Fittings Wherever Required Including The Cost Of Pvc Plug / Neoprene Gasket Required 38 Providing And Fixing 12Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Paneling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge. Pre Laminated Particle Board With Decorative Lamination On Both Side 39 Providing And Fixing Glazing In Aluminum Door, Window, Ventilator Shutters And Partitions Etc. With Pvc Plug / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminum Snap Beading Shall Be Paid In Basic Item ) Float Glass Panes Of 4Mm Thickness 40 Red Meranti Normal ( 15 To 16 Kg Per Cft. Approx. ) Wood Cup Board Chowkats Including Iron Hold Fasts, Iron Hinges Corner Straps, Wooden Knobs Or Handles Fixed In Position ( Size 45 X 60Mm ) . 41 Providing And Fixing Commercial Plywood 12Mm Thick 42 Providing & Fixing Decorative High Pressure Laminated Sheet 1Mm Sf Thick With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is : 2046 Type S, Including Cost Of Adhesive Of Approved Quality. 43 Providing & Fixing Decorative Laminated Sheet 0.72Mm Thick And Reverse Side Of Adhesive Bonding Quality Conforming To Is : 2046 Type S, Including Cost Of Adhesive Of Approved Quality 44 Butt Hinges Anodized Aluminium Matt Finished 75 Mm X 40 Mm X 3.2 Mm 45 Providing & Fixing 6 Stainless Steel Handles Isi Marked On Door & Window Frames Complete In All Respect As Per The Directions Of Engineer-In-Charge 46 Providing & Fixing 9 Stainless Steel Handles Isi Marked On Door & Window Frames Complete In All Respect As Per The Directions Of Engineer-In-Charge. 47 Providing & Fixing 6 Stainless Steel Tower Bolts Isi Marked On Door & Window Frames Complete In All Respect As Per The Directions Of Engineer-In-Charge. 48 Providing And Fixing Special Quality Bright Finished Brass Cupboard Or Ward Robe Locks With Four Levers Of Approved Quality Including Necessary Screws Etc. Complete In All Respect As Per The Directions Of Engineer-In-Charge. 50Mm 49 Add Difference Of Gst 12% To 18% As Per Ac Slip

INR 5000 /-

INR 29410.0 /-

INR 14.70 Lakhs /-

Name of Work:Repair & Renovation of Chemistry Lab at Government Ripudaman College, Nabha Under Head -8443

Sl. No.	Item Description
1	Dismantling brick work tile, masonry or tile lining in cement
2	Scraping White wash and colour wash
3	Scraping of Cement plaster
4	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish
5	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
6	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
7	Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
8	20mm thick cement plaster 1:4 in two coat work
9	Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) Double Rebate
10	Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. 35 mm thick
11	Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm
12	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851mm to 1000mm)
13	Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
14	Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).
15	Providing and fixing beading to door and windows chowkats of commercial hard wood, such as Hollock, Champ, Chirassy Chaplash etc (Non coniferous timber other than teak conforming to ISI specification no 100., kiln seasoned) with iron screws, fixed in position complete as per design and shape required. 50mmx12mm
16	Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. and Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
17	Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
18	Providing and Fixing Name Plates of various sizes made of PVC sheet printed with self adhesive tape pasted on sunboard complete as desired by Engineer-in-Charge
19	Renewing glass panes with putty and nails wherever necessary Glass panes weighing 10.75 Kg/sqm
20	First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.
21	Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineer in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect.Size 450 mm x 300 mm x 150 mm
22	Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 110mm o/d pipe
23	Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
24	Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete
25	Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.
26	Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc
27	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth
28	Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete
29	Cement concrete 1:4:8 with brick balast 40mm gauge mixing by mechanical means using concrete mixer volumetric type
30	Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
31	Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matchingshade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
32	Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm
33	Wire gauge fixed on chowkats with 25mm thick Hollock wood cover molding of full width.
34	Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead.With cement mortar 1:4 (1 cement: 4 sand) Taking area 2.5 sqm
35	Plastering on underside of ceiling 10mm thick cement plaster 1:4
36	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/ neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In Charge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats
37	For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
38	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre laminated particle board with decorative lamination on Both side
39	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 4mm thickness
40	Red meranti Normal (15 to 16 kg per cft. Approx.) wood cup board chowkats including iron hold fasts, iron hinges corner straps, wooden knobs or handles fixed in position (Size 45 x 60mm).
41	Providing and fixing commercial plywood 12mm thick
42	Providing & Fixing decorative high pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
43	Providing & Fixing decorative laminated sheet 0.72mm thick and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality
44	Butt Hinges Anodized Aluminium Matt finished 75 mm X 40 mm X 3.2 mm
45	Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge
46	Providing & fixing 9" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
47	Providing & fixing 6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
48	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete in all respect as per the directions of Engineer-in-charge. 50mm
49	Add difference of GST 12% to 18% as per AC Slip