Supply Of Chain And Chain Spares For Auxiliary Cane Carrier , Spares For Auxiliary Cane Carrier Chain (Pitch 150Mm) As Per Our Drawing No. Scsm-Np-022, Rev-01 , Inside Link (Item No. 1) Material : En-09 , Outside Link (Item No. 2) Material : En-09 , Outside Link, Cut Type (Item No. 3) : En-09 , Bush (Item No. 4) Material : En-353 , Pinwith M20 Nylock Nut (Item No. 5) Material : En-351 , Roller (Item No. 6) Material : Is:2062 , M. S.Slat For Auxiliary Cane Carrier150 Mm Pitch Chain As Per Drg. No. Scsm/Np-024. Material: M.S.: Is: 2062, Finish Weight 18.4 Kgs/ Each Appx. , Spares For Main Cane Carrier Chain (Pitch 200 Mm) As Per Our Drawing No. Scsm-Mills-245 , Outside Link, Cut Type (Item No. -1) Material : 55 C8, Is:1570 -1979 , Outside Link(Item-1A) Material : 55 C8, Is:1570 -1979 , Inside Link (Item-2) Material : 55 C8, Is:1570 -1979 , Pin With M25 Nylock Nut (Item-3) Material : En-353 , Bush(Item-4) Material : En-351 , Roller(Item-5) Material : En-8 , M. S.Slat For Main Cane Carrier200 Mm Pitch Chain As Per Drg. No. Scsm-Mills-246. Material: M.S.: Is: 2062, Grade ‘A’ Finish Weight 25 Kgs/ Each Appx. , Spares For Bagasse Carrier Chain (Pitch 150 Mm) As Per Our Drawing No. Scsm/Np-U91, Rev.-B , Inside Link (Item No. 1) Material : En-19 , Outside Link(Item No. 2) Material : En-19 , Outside Link, Without Attachment/ Cut Type (Item No. 2A) Material : En-19 , Outside Link, With Attachment/ Cut Type (Item No. 2B) Material : En-19 , Roller (Item No. 3) Material : En-8 , Pin With 7/8” B.S.W. Castle Nut (Item No. 4/8) Material : En-353 , Bush (Item No. 5) Material : En-353 , Rack Attachment Pin With M18 Nut (Item No. 6) Material : En-8 , Racks For Intermediate Carrier Fabricated From M.S. Plates As Per Drawing No. Scsm-Mills-269, Revision ‘C’ , Metlon Pad As Per Drg No. Scsm-Mills-275 Item No. 1 , M.S. Stopper Plate As Per Drawingno. Scsm-Mills-275 Item No. 2 , Block Type Forged Chain Having 229 Mm Pitch (Duly Assembled) For Main Rake Elevator And Inter Rake Carriers As Per Our Drawing No Scsm-Mills-310. , Pin With Nylock Nut For Forged Steel Block Type Chain As Per Drawing No. Scsm-Mills-310 , Overhauling Of Block Type Forged Chain As Per Our Drawing No. Scsm- Mills- 310 (Overhaul). Main Jobs To Be Carried Out: 1 Removal Of Ovality Of Holes Rack Attachment Pads And Welding Of Broken Pads With Links. 2 Replacement Of Worn Out Pins With M30 Nylock Nuts, Washers And Split Pins. 3 Provision Of Both Pin Stopper Pads. 4 Fitting Of New Bushes After Removal Of Ovality With Maintaining The Pitch I.E. 229 Mm ±0.3, Wall Thickness Of Bushes Should Suit The Pin Diameter. 5 Replacement Of Worn Out Bushes (Material - Ss : 410). M.O.C. Should Be Strictly As Per Our Drawing With Test Certificate.
