Tender For Annual Maintenance Plan For The Year 2023-24 (Pmgsy Road)On Chilladhar Bihar Road Km. 0/0 To 4/0P .(Sh:-Providing And Laying Busg For Correction Layer , Bituminous Concrete In Km. 2/00 To 3/00 &Providing And Laying Hot Applied Thermoplastic Edg
Tender Value
14.85 Lakhs
Estimated cost
Bid Submission
10 Apr 2023
0 days left
EMD
29800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
banjar → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Annual Maintenance Plan For The Year 2023-24 ( Pmgsy Road ) On Chilladhar Bihar Road Km. 0 / 0 To 4 / 0P . ( Sh:-Providing And Laying Busg For Correction Layer , Bituminous Concrete In Km. 2 / 00 To 3 / 00 &Providing And Laying Hot Applied Thermoplastic Edge Line )
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying and rolling of built-up spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a base, conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm ( Seventy five Millimetre ) as per MORTH Specification Clause 506with bitumen (VG-10)within all leads and liftsincluding carriage of materials and as per direction and entire satisfaction of Engineer-in-Charge.(Bulk Bitumen). |
| 2 | Providing andLaying tack coat with Bitumen emulsion (medium setting) using emulsion distributor at the rate 0.25 to 0.30kg (Zero point two five to zero point three zero Kilograme ) per Square metre on the prepared dry and hungry bituminous/granular surface cleaned with hydraulic broom as per MORTH specification clause 503 within all leads and liftsincluding carriage of material and as per direction and entire satisfaction of Engineer-in-Charge. |
| 3 | Providing and laying 30 mm (thirty milimetre) thickbituminous concretewith 100-120 TPH batch type hot mix plant producing an average output of 75( seventy five) tonnes per hour using crushed aggregates of specified grading-II 13mm (thirteen milimetre), premixed with bitumen (VG-10 ) @ 5.4 to 5.6( five point four to five point six) percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandom rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete including profile correction layer and patching of pot holes in all respectwithin all leads and liftsincluding carriage of material and as per direction and entire satisfaction of Engineer-in-Charge.(Bulk Bitumen) |
| 4 | Providing and laying of hot applied thermoplastic compund 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level,uniform and free from streaks and holes. within all leads and liftsincluding carriage of material and as per direction and entire satisfaction of Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Apr 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender