Irrigation And Public Health Department has published Tender For Providing Lwss Nahan Town From Giri River At Dadahu Tehsil Nahan Distt. Sirmour Hp (Sh:- White Washing Distempering Painting And Repair Work Of Type I Qtr 4 Nos Set Ground Floor And 4 No Set Of 1St Floor Smt Asha Sh Balinder Smt Anita Sh Harvin. Submission Date for this Tender is 10-04-2023. Water Supply Project Tenders in nahan Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Apr-2023 | Corrigendum | Other | 10-04-2023 |
| Sl. No. | Item Description |
| 1 | Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete as directed by the Engineer Incharge. |
| 2 | Applying priming coat over interior wall surface(one coat)surfaces after and including preparingthe surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting: ready mixed paint brushing wood primer pink,including all , leads, and carriage of material at site and as directed by the Engineer Incharge. |
| 3 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.cement mortar 1:4 (1cement: 4 coarse sand)complete as specified and as directed by the Engineer-in-Charge. |
| 4 | 20mm cement plaster in single coat on rough side of brick /stone masonary for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80-mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6app.sand) including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 5 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smoothcomplete in all respect with in all leads lifts complete and entire satisfaction of Engineer-in-charge. |
| 6 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.includingall leads lifts and carriage of materila at site and as directed by the Engineer Incharge. |
| 7 | Applying priming coat over new wood and wood based surfaces after and including preparingthe surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting: ready mixed paint brushing wood primer pink,including all , leads, and carriage of material at site and as directed by the Engineer Incharge. |
| 8 | P/F panneledglazzed or panneled and glazed shutteres ofdeodar2nd classwood for doors,windows including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 9 | Applying priming coat over exterior wall surface(one coat)surfaces after and including preparingthe surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting: ready mixed paint brushing wood primer pink,including all , leads, and carriage of material at site and as directed by the Engineer Incharge. |
| 10 | Wall painting (two coat)with plastic tractor emulsion paint of approved brand and manufacture on decorated wall to give an even shadecomplete in all respect with in all leads lifts complete and entire satisfaction of Engineer-in-charge. |
| 11 | Finishing wall with weather proof exterior grade emulsion of approved design (apexultima) or its equarlied on undecorated wall surface (two coats) to give an even shade complete in all respect with in all leads lifts complete and entire satisfaction of Engineer-in-charge.. |
| 12 | Paintingtwo coats ( excluding priming coat ) on previouslypainted wood and wood based surface with enamel paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter ,sand papering and stopping with enamelpaint other than white, including all leads, lifts and carriage of mateial at siteand as directed by the Engineer Incharge. |
| 13 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm complete in all respect with in all leads lifts complete and entire satisfaction of Engineer-in-charge.. |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles size (300mm x 300mm)conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Providing and laying Ceramic glazed floor tiles of size 600x600 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:3(1 Cement : 3 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete in all respect with in all leads lifts complete and entire satisfaction of Engineer-in-charge. |
| 16 | Excavation in foundations and trenches etc, in earth work, lift up to 1.5 mtrs stacking the excavated soil not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required in to plinth of foundations etc, consolidating each deposited layer by ramming and watering and than disposing of all surplus excavated earth as directedwithin a lead of 20 mtrs, in all kind of soil in P.W & J.W. 50% each complete in all respect, including all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge. |
| 17 | Providing and laying cement concrete 1:4:8 (1cement:4app.sand:8app. graded stone aggregate 20mm nominal size) and curing complete excludingcost of form work in foundation and plinth in all height and depth includingall leads, lifts and carriage of material at site and as directed by theEngineer Incharge. |
| 18 | Providing and laying rainforced cement concrete work 1:2:4(1cement:2app sand :4app graded stone aggregete 20mm nominal size and curing complete excluding cost of form work and .reinforcement for RCC work in suspended floor roof , landing shelves and their supports balconies beams, girders bressumer and cantilevers upto floors two level in all heightand depth, including all leads , lifts and carriage of material at site and as directed by theEngineer Incharge. |
| 19 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, bend with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required .W.C. pan with ISI marked white solid plastic seat and lid complete in all respect with in all leads lifts complete and entire satisfaction of Engineer-in-charge. |
| 20 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110mm dia complete in all respect, including all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge. |
| 21 | Providing Corrugated G.I. Sheet Roofing Fixed with Galvanished Iron J & L Hooks Bolts and Nuts 8 mm diameter with bitumen and G.I. Limpet washers filled with white lead complete excluding the cost of purlins refters and trusses 0.80 mm thick Sheet complete in all respect, including of all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge. |
| 22 | Steel work in single section including cutting, hoisting, fixing in position and applying and priming coat of red lead paint. including all leads, lifts and carriage of material at site and as directedby the Engineer Incharge in R.S. joints , channels , angles, tees. |
| 23 | Steel work welded in built up sections , trusses and framed work including cutting, hoisting, fixing in position and applying and priming coat of red lead paintin gratings, framed guard bars, ladders, railings , brackets and similar work. including all leads, lifts and carriage of material at site and as directedby the Engineer Incharge. |
| 24 | Providing and fixing Man Hole covers of MS Sheet Size 500x 500mm 23Kg including angleincluding all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.. |
| 25 | Dismentaling of Hand Pump including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.. |
| 26 | Providing and FixingPVC Water Tank 1000 Litre capacity reputed company sintex/ashirvad etc as per requirement at site Complete in all respect, including all leads, lifts and carriage of material at site and as directed by The Engineer-Incharge. |
| 27 | M.S. tower bolts (Barrel type) leads and lifts. 200x10 mm complete in all respect, including all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge. |
| 28 | Providing and fixing bright finished brass hanging type floor door stopper 150mm dia with necessary screws, etc. complete in all respect, including all leads, lifts and carriage of material at site and as directed by The Engineer-Incharge. |
| 29 | M.S. handles 125mm Dia. complete in all respect, including all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge. |
| 30 | Providing 40x3 mm flat iron hold fast 40 Cm long including fixing to frames 10mm diameter bolts and nuts and wooden plug and embended in cement concrete block 30x10x15 Cm. In1:3:6 (1 cement :3 sand :6 gradedstone agg. 20 mm nominal size) complete in all respect, including all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge. |
| 31 | Providing and layingcement concrete work 1:2:4(1cement:2app sand :4app graded stone aggregete 20mm nominal size and curing completeincluding all leads , lifts and carriage of material at site and as directed by theEngineer Incharge. |
| 32 | Providing, Installation, Testing and commissioning or exhaust Fan & Regulator,(bajaj/usha) i/c wiring the down rod of standard of exhaust fan & regulator, i/cwiring, the down rod of standard length (upto 30 cm.) with 1.5 Sq. mm PVC insulated copper conductor single core cable etc. as required 300 mm sweepCategroy-A) complete in all respect and as directed by the Engineer Incharge. |
| 33 | Brick work using common burnt clay building bricks(2nd class) including racking out joints in cement mortar 1:4 (1cement :4sand)foundation andplinthincluding all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 34 | Half brick work using common burnt clay building brick 2nd class in super structure abvoe plinth level upto floor two level incement mortar1:6 (1cement : 6sand) Ist class brick, includingall leads, lifts and carriage of material at site and as directed by theEngineer Incharge. |
| 35 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30 x 30 x 5 mm so as to give afair finish including centring, shuttering, sturtting and propping with wooden ballies etc. the height of propping and centring from supporting floor to ceiling not exceeding 4 mtr. and removal of the same for insitu R.C.C. and plain concrete work in complete in all respect, including all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge. |
| 36 | Flat Surface such as soffits of suspended floors, roofs, landing & the like floors etc. upto 200 mm in thickness including all leads, lifts and carriage of material at site and as directed by The Engineer-Incharge. |
| 37 | Beams, cantilever, girders and lintels :- Sides and soffits of beams, beam haunching cantilevers, brssumers and lintels not exceeding 1 metre in depth in all heights from floor |
| 38 | Edges of slabs and break in floors and walls :-Under 20cm wide |
| 39 | Providing Tor Steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level including all leads, lifts and carriage of material at site and as directed by The Engineer-Incharge. |
| 40 | 15 mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) with in complete in all respect, including all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge. |
| 41 | ProvidingPVC waste and vent pipe 110mm dia complete inall respects including of all lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 42 | Providing and fixing PVC bend 110 mm dia fittingsofapproved make and relevent ISS complete in all respects including of all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 43 | Providing and fixing Plain bend 110 mm dia fittingsofapproved make and relevent ISS complete in all respects including of all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 44 | Providing and fixing cast iron rungs 200mm wide with chequarred/ ribbed non slip surface including 200x100x100 mm cement concrete 1:3:6 (1cement :3sand:6graded stone agg. 40mm nominal size , I/c allleads, lifts and carriage of material atsite and as directed by theEngineer Incharge. |
| 45 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) |
| 46 | Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.(Area of window above 0.75 sqm upto 1.50 sqm).including of all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge. |
| 47 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:6 (1 cement : 6 coarse sand)including of all leads, lifts and carriage of material at site and as directed by the Engineer-Incharge. |
| 48 | Cement concrete flooring 1:2:4 (1cement:2sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement(40mm thick) complete in all respect, including all leads, lifts and carriage of material at site and as directed by The Engineer -Incharge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
