Tender For Construction Of Flow Irrigation Scheme Traimbla At Village And G.P. Ambari, Tehsil Shahpur, District Kangra (H.P.)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Apr 2023
0 days left
EMD
92900
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ambari → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Flow Irrigation Scheme Traimbla At Village And G.P. Ambari, Tehsil Shahpur, District Kangra ( H.P. )
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing of cement concrete manually/ by mechanical means including disposal of material within all leads and lifts complete in all respect and to the entire satisfaction of theEngineer-in-Charge. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, pits upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing and pumping out water, chieselling soft / hard rock including getting out the excavated soil, dressing of sides, ramming of bottoms and returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all leads and lifts complete in all respect and to the entire satisfaction of theEngineer-in-Charge. |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 4 | Foundations, footings, bases of columns,etc. for mass concrete complete in all respect within all leads and lifts and to the entire satisfaction of the engineer-in-charge. |
| 5 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.complete in all respect within all leads and lifts and to the entire satisfaction of the engineer-in-charge. |
| 6 | Extra Allowance for formwork in concrete lining in: |
| 7 | Bed complete in all respect within all leads and lifts and to the entire satisfaction of the engineer-in-charge. |
| 8 | In sides complete in all respect within all leads and lifts and to the entire satisfaction of the engineer-in-charge. |
| 9 | Providing and laying in position cement concrete 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of centering and shuttering complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 10 | Providing and laying in position cement concrete 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of centering and shuttering complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 11 | Providing cement concrete lining 15 cm thick or less for irrigation channels, using cement concrete 1:2:4 (1 cement2 sand :4 stone aggregate 20 mm nominal size) in: |
| 12 | Bed complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 13 | Side slopes complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 14 | Providing and laying in position cement concrete 1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of centering and shuttering for all work up to plinth level complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 15 | Providing and laying in positionreinforced cement concrete 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) and curing complete in : |
| 16 | All work up to plinth level excluding the cost of centering, shuttering & reinforcement complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 17 | In walls(any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level to floor five level excluding the cost of centering, shuttering and reinforcement complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 18 | Boulder filling dry hand packed tightly as in wire crate apron bund complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 19 | Providing Mild steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 20 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 21 | Finishing with epoxy paint (two or more coats) at all locations prepared on steel work and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 22 | Writing new letters and figures of any shade with synthetic enamel black or any other approved colour to give an even shade as per drawings and technical specifications clause 1701 in English and roman, hyphen, commas and the like not to be measured and paid complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
| 23 | Providing & fixing HDPE pipe of 90 mm dia as per IS 4984, PE-80 complete in all respect within all leads and lifts and to the entire satisfaction of theEngineer-in-Charge. |
AI Tender Summary
Tender Timeline
Apr 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender