Tender For Installation Of Water Purifier With Solar System At Baniakuri Sansad. Activity Code No.- 47013022/ 2122
Tender Value
3.49 Lakhs
Estimated cost
Bid Submission
08 Apr 2023
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gopalbati → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Installation Of Water Purifier With Solar System At Baniakuri Sansad. Activity Code No.- 47013022 / 2122
BOQ
| Sl. No. | Item Description |
| 1 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. |
| 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. |
| 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc.layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation. |
| 4 | (B) Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the costof supply of sand. (payment to be made onmeasurement of finished quantity) |
| 5 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 6 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 7 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety |
| 8 | In 1st. Floor |
| 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundation |
| 10 | (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In- Charge. |
| 11 | In 1st. Floor |
| 12 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(i) Tor steel/Mild SteelOther than SAIL/ TATA/RINL |
| 13 | In 1st. Floor |
| 14 | Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floor |
| 15 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 16 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement(ii) 25 mm. thick |
| 17 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 18 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in - Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency](ii) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding 0.6 sq.m. |
| 19 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugsin ground floor. |
| 20 | in 1st. Floor |
| 21 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall (b) Area of each tile above 0.09 Sq.(ii) Other than Coloured decorative including white |
| 22 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar((c) 15 mm thick plaster(Gr. Floor) |
| 23 | (ii) With 1:4 cement mortar(c) 10 mm thick plaster(1st. Floor) |
| 24 | Cement washing including cleaning and smoothening surface thoroughly (cement to be used @15 kg./100 sq.m. of surface for one coat and @25 kg./100 sq.m of surface for two coats)(b) Two coats (on new works only). |
| 25 | In 1st. Floor(a) One coat |
| 26 | Synthetic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning andsmoothning of surface.Two Coats |
| 27 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification.(iii) Two coats. |
| 28 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 29 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :(iv) Two coats (with any shade except white) (b) On steel or other metal surface :(iv) Two coats (with any shade except white) |
| 30 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground.(Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)PVC Pipes (Dia)25 mm |
| 31 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(b) 1000 litre capacity |
| 32 | Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).PVC Pipes (Dia) 50 mm |
| 33 | PVC Pipes (Dia) 100 mm |
| 34 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.(d) For depth upto 150 metre. (i) 50 mm dia. boring etc. |
| 35 | (d) For depth upto 150 metre. (i) 100 mm dia. boring etc. |
| 36 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.(ii) 50 mm dia. |
| 37 | Supply, delivery & installation of 975 watt peak Ploycrstiline(325WPsolar pv module) capacity Solar Photovaltaic array panels along with 160V DC 1.00 H.P. 2800 rpm (Pump with MPPT Controller ) capacity Solar Photovoltaic submerssible pump set (Minimum 900 Watt ,MNRE Standard designed to use with Solar Power of whose output is not less than 2000-2500 Ltrs/hour at 30-35 Mtrs. with all allied works as per direction of the E.I.C. PUMP JACKET -SS,PUMP BEARING BUSH-LEADED BRONZE, PUMP SHAFT- SS410,SUCTION BRAKCET-Cast Iron,MAXIMUM AMP-4.00 amp, IMPELLER & STAGE CASTING- NORYL with water level censor [ Solar Photovoltaic Submerssible Pump and controller should carry a warranty at least of 02 year directly from the manufacturers & Solar Panels carry a warranty at least of 25 year directly from the manufacturers ](make-Solarize/TATA /Havels/Others) |
| 38 | Supply and laying 3 Core 2.5 Sqmm Flat Cable. (MakeCurrency/KEI/Polycab/HPL) |
| 39 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By ISI-Medium GI pipe.(PWD Elect. sch Nov 2017,P no-G-1 it no-2(a) |
| 40 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts,nuts, washers, spacing insulators etc. as required.(PWD Elect. sch Nov 2017,P no-G-2 it no-4 (a) |
| 41 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages (i)6 S.W.G. wire. (PWD Elect. sch Nov 2017,P no-G-2 it no-5 (a) ii |
| 42 | Supply and laying Cables DC - 4 SQ MM TYPE 1 |
| 43 | Solar modle ,12V, 50WP, Solar Battery ,12V, 40h (6 LMS 4OL), Solar LED Luminary for street light ,12V DC, 12Watt, Copper cable 2C, 2.5 Sq. mm for Solar street light wiring 1.5m, Fitting & Fixing of the material |
| 44 | Construction of circular soak well 2.5 metre deep |
| 45 | GST @18 % |
| 46 | Labour welfare cess @1% |
AI Tender Summary
Tender Timeline
Apr 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender