Bharat Sanchar Nigam Limited-BSNL has published Tender For Melarmath Type Ii Pt Quarter Complex Agartala. Submission Date for this Tender is 11-04-2023. Drainage Tenders in West Tripura Tripura. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
2 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). |
4 | Centering and shuttering including strutting, propping etc. and removal of form for : |
5 | Suspended floors, roofs, landings, balconies and access platform |
6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
7 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
9 | Cement mortar 1:4 (1 cement :4 coarse sand) |
10 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
11 | Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble |
12 | Area of slab upto 0.50 sqm |
13 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
14 | Granite work |
15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
16 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
17 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
18 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). |
19 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
20 | 300x16 mm |
21 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
22 | 250x10 mm |
23 | 150x10 mm |
24 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
25 | 125 mm |
26 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge |
27 | Extruded section profile size 42x50 mm |
28 | Providing and fixing to existing door frames. |
29 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
30 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
31 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, |
32 | (i)Single socketed pipes. |
33 | 110 mm diameter |
34 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
35 | Bend 87.5° |
36 | 110 mm bend |
37 | 12 mm cement plaster of mix : |
38 | 1:6 (1 cement: 6 fine sand) |
39 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
40 | 1:6 (1 cement: 6 fine sand) |
41 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
42 | 1:4 (1 cement: 4 fine sand) |
43 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
44 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
45 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. |
46 | Removing and refixing the rolling shutter of size upto 9.00 Sqm in required position including taking out pipe shaft with brackets, wire springs, side guides and arrangements for inside and outside locking complete and fixing in the required position all comlete. |
47 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
48 | W.C. pan with ISI marked white solid plastic seat and lid |
49 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
50 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
51 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
52 | Kitchen sink without drain board |
53 | 610x460 mm bowl depth 200 mm. |
54 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
55 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
56 | Semi rigid pipe |
57 | 32 mm dia |
58 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
59 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
60 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
61 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
62 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
63 | 15 mm nominal outer dia. Pipes. |
64 | 25 mm nominal outer dia .Pipes. |
65 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
66 | 25 mm nominal bore |
67 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
68 | 45 cm length |
69 | 15 mm nominal bore |
70 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
71 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
72 | 15 mm nominal bore. |
73 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
74 | 15 mm nominal bore. |
75 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
76 | 15mm nominal bore |
77 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
78 | Supplying and fixing C.I. cover without frame for manholes : |
79 | 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. |
80 | P/F reqquired CPVC FBT/MBT fittings of press to fit design of sealing gasket of EPDM mateial of required dia as per direction of E.I.C. |
81 | (a) 25mm dia n/b |
82 | P/F reqquired CPVC FBT/MBT fittings of press to fit design of sealing gasket of EPDM mateial of required dia as per direction of E.I.C. |
83 | (a) 15mm |
84 | Cleaning of floor with Acid(Harpic or equivqlent) , brush etc including shifting of materials to another places in same campus as desired and broken glass lying on whole floor &dismantlingsuface wiring except switch board all comlete & disposed to dumping ground as per direction of E.I.C.( only area of floor to be measured) |
85 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. Chlorination of RCC internal surface by liquid chlorine etc. as per direction of Engineer-in-Charge. |
86 | Cleaning of roof by dumping uwanted rubbish, growing tree etc and wash out whole roof as per direction of E.I.C. |
87 | Cleaning of septic tank by mechanical means and disposal of liquid/semi liquid/solid extract beyond municipal limits and flushing with water lead up to 5.00 KM etc. all complete as per direction of E.I.C.( Item includes removing super netan liquid and digested sludge with help of municipal approved vehicle and disposal the same beyond municipal limits) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail