|
| 1 | ENGINE FIXTURE TROLLEYSupply, Installation, Testing and Commissioning of Engine fixture trolley for overhauling of heavy Engines, with suitable arrangment to load Ashok Leyland Enginesa) Leyland HINO EURO Enginesb) Viking Engine BS IIIThe fixture trolley is made of MS capable up to carry 1.5 tonnes. The fixture should be rotate 360 degrees, lever operated and to be lockable at any angle with locking arrangment for overhauling. Guide handles to be provided with rubber bushings for safe handling Tray (Removable) to be provided in the bottom( with Stainless steel plate of minimum 3mm thick), To be provided with minimum 3 coat of rust proof painting, Wheels to be provided with locking arrangement to arrest movement while overhauling is done. Castor wheels with minimum width of wheels 40mm, with center to center distance between wheels 70cm (to be guided through- guides on floor), capabale of rotating 360 degrees, Special attachments for attaching the engine to the fixtures also to be provided. Approx dimension 1370 (L) X800(W) X 1090 (H) mm |
| 2 | ENGINE CARRY TROLLEYSupply, Installation, Testing and Commissioning ofEngine carry trolley for transferring of heavy Engines, with suitable arrangment to load Ashok Leyland Enginesa) Leyland HINO EURO Enginesb) Viking Engine BS IIIThe trolley is made of MS capable up to carry 1.5 tonnes. Tray (Removable) to be provided in the bottom( with Stainless steel plate of minimum 3mm thick) To be provided with minimum 3 coat of rust proof painting, Wheels to be provided with locking arrangement to arrest movement while overhauling is done. Castor wheels with minimum width of wheels 40mm, with center to center distance between wheels 70cm (to be guided through- guides on floor), capabale of rotating 360 degrees, The trolly should be designed to attach and remove the crane lift belt to the engines while resting on them.Approx dimension 1100 (L) X800(W) X 750 (H) mm |
| 3 | Trolley guide railSupply, Installation, Testing and Commissioning of Trolley guide rail for guided movement of engine fixture trolley and engine carry trolley. MOC: Hardened steel. With C cross section of width 60mm for trolley wheels to move. To be fixed at specific width, in parallel at required areas. Entry exit portions to have V shaped guides to guide the trolley to the rails. minimum thickness 6mm. |
| 4 | Component storage tray-1Supply, Installation, Testing and Commissioning of MS rust proof painted Components storage tray, with 3 to 5 cabinets as per requirement (900H X 900W X 600D). Minimum gauge of 12 or thicker. Each cabinet to provide with lock and key arrangement. Each cabinet to provide with heavy duty castor wheels with locking arrangement in the bottom, and also to provide with level adjustments with locking arrangment |
| 5 | Degreasing Tank 1000LSupply, Installation, Testing and Commissioning of Degreasing tank with capacity 1000L. (1000X1000X1000mm) MOC SS 304. To be provided with drain option from bottom centre with slope, with 40NB SS ball valve for 100% drain of the liquid from the tank. Minimum thickness of the tank, 5mm. To be welded and passivated. Mounted on SS 304 interconnected supports using 50mm square tubes, heavy duty, height 400 mm from bottom. With level adjustable arrangement. Bottom plates to be of width 100mmX100mm. Top flanges of minimum width 50 cm. |
| 6 | Degreasing Tank 700LSupply, Installation, Testing and Commissioningof Degreasing tank with capacity 700L. (850X850X950mm) MOC SS 304. To be provided with drain option from bottom centre with slope, with 40NB SS ball valve for 100% drain of the liquid from the tank. Minimum thickness of the tank, 5mm. To be welded and passivated. Mounted on SS 304 interconnected supports using 50mm square tubes, heavy duty, height 400 mm from bottom. With level adjustable arrangement. Bottom plates to be of width 100mmX100mm. Top flanges of minimum width 50 cm. |
| 7 | Component storage tray-2Supply, Installation, Testing and Commissioning of MS rust proof painted Components storage tray, with 3 to 5 cabinets as per requirement (1000H X 1000W X 600D). Minimum gauge of 12 or thicker. Each cabinet to provide with lock and key arrangement. Each cabinet to provide with heavy duty castor wheels with locking arrangement in the bottom, and also to provide with level adjustments with locking arrangment |
