Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-05-2023 | Due to Administrative reasons, tender have been postponed | Date | 11-05-2023 |
| 2 | 28-04-2023 | Tender have been postponed | Date | 08-05-2023 |
| 3 | 17-04-2023 | Tender Date Postponed Due to the administrative reason | Date | 02-05-2023 |
| 4 | 11-04-2023 | Extension of the tender date | Date | 18-04-2023 |
| Sl. No. | Item Description |
| 1 | EARTH WORK EXCAVATION |
| 2 | Earth work in all soils except hard rock requiring blasting and conveying for Desilting and formation of bund with lead of 0 to 100 metre deploying earth moving machinery and tippers including benching, formation of bunds, breaking clods, sectioning etc., complete (PWD-SOR-Pg: 24/Sl: 59) rate including 5Km earth conveyancing of desilting |
| 3 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum For Narrow Foundations - First Depth Upto 2m |
| 4 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum For drain and culvert |
| 5 | FILLING |
| 6 | Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 7 | Providing and laying WellGravel to the required thickness including cost and conveyance of sand and gravel to the work site and stacking them to the standard departmental meter gauge for Premeasurement mixing the required quantity of sand and gravel sprinkling water and compacting the mix in layer of thickness not exceeding 100mm compacted thickness by 80-100mm to active the required density including labour charges for mixing spreading and tools and plants etc complete. |
| 8 | Supplying and filling in basement with Soling Stones blasted 15cm cube in layers of 15cm thick including watering and ramming to consolidation 1 m3 |
| 9 | Supplying and filling in foundations and basement with fillingQuarry Dust in layers not exceeding 15 cm.thick,well watered,rammed and consolidated etc. complete complying with standard specifications. |
| 10 | CENTRING WORKS |
| 11 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel without shuttering |
| 12 | Centering without strutting below 1m height |
| 13 | Centering for Plain surface |
| 14 | Centering without strutting above 1m height |
| 15 | Beam & Slab |
| 16 | PLAIN CEMENT CONCRETE |
| 17 | Plain Cement Concrete 1:2:4 (One Cement three M-sand and six aggregate) using 20mm hard broken granite stone jelly for foundation includingdewatering and wherever necessarylaying in layers of 15cm thick and consolidated and curing complying with stand |
| 18 | Plain Cement concrete of mix 1:4:8 (One cement four M-sand and eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.TNDSS NO.28 V,VI S25 |
| 19 | REINFORCED CEMENT CONCRETE |
| 20 | Providing and laying in position Standardised Concrete Mix M-20 Grade |
| 21 | Reinforced Cement concrete1:1½:3 (M25) (One cement one point five M-sand and three aggregates) mix using 20mm gauge hard granite broken stone jellyin all RCC works connected to the work excludingshuttering , Centering and cost of Reinforcement grills but |
| 22 | Upto 4.50m height (plinth level to 4.50m ht) |
| 23 | Upto 4.50m SLAB |
| 24 | Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m? and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials). |
| 25 | Inlet and Outlet arrangements (Foundation Lvl) |
| 26 | Inlet(Foundation Lvl to 4.5m High |
| 27 | STEEL |
| 28 | SupplyingandFabrication of Steel and placing in position TMT rod Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force and as directed by department officials.- |
| 29 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc,complete as per standard specification |
| 30 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 31 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers |
| 32 | Providing cut stone paving slab 75mm to 100mm thick of required sizes neatly dressed in all sides except bottom one line dressing pointing with cement mortar 1:3 mix for full depth of the slab and earth work excavation in all soils 15cm thick sectioning and levelling including supplying and filling of sand 50mm thick cushion for paving the slab - 1 m2 |
| 33 | Providing cut stone kerb stone of size 60cm x 10cm x 37.5cm with all faces neatly dressed oneline dressing with chambered edge on the road side including earth work excavation in all soils for 10cm width and 22.5cm depthand fixing the stone in position including grouting the joints with cement mortar 1:3 mix etc., complete |
| 34 | Casting of precast cement concrete Post of size 150x150x2400mm in Plain cement Concrte Mix of 1:1 1/2:3 ( One cement one and half rate sand Three aggregate) using 20mm size hard broken stone jelly and mixing the concrete and laying the concrete in steel moulds after oiling them properly at casing yard and vibrating finishing the top surface smoothy placing the slab along with mould and plate in the casting yard removing the mould carefully after initial setting, Placing the slab in the euring bond after 24 hours from the time of casting, removing them from the curing pond after 7days of curing, stacking them in the stacking yard [with in a lead of 100m and curing them from the full period by sprinking water as directed by the departmental Officers. |
| 35 | Supplying and Fixing of Chain link-2\"x2\" using 10 Gauge Galvanised Iron wires (Of all sizes) for fencingcost including all material, binding wire and labour charges etc. complete as per Standard specification and as directed by the departmental officers.For 10M2 |
| 36 | Sluice Gate Valve 450mm dia CI sluice valves non raising spindle types to pressure rating of 1.6 pn to be used in pump houses (long body/ long face to face) conforming to is and with 5 years warranty (TWD-Pg:65) |
| 37 | STONE MASONRY |
| 38 | Random Rubble Masonry in Cement Mortor 1:5 Mix (one cement, five sand)usingnewbest rough and bond stones from approved quarry including cost and conveyance of all materialsto site loading and unloading charges and labour charges for mixing,laying with simaltaneous pointingand curing etc. complete. complying with std.specifications |
| 39 | Pointing Random Rubble masonry with Cement Mortar(1:3) to flush pointing , curing etc complete - 10 sqm S.I.327 |
| 40 | BRICK MASONRY |
| 41 | Brick work in following Cement Mortar using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9\" x 4-1/2\" x 3\" for foundation and basement including curing, etc., complete complying with standard specifiction. |
| 42 | Brick partition walls of 11.50cm thickness using best quality Country bricks of size 8\"3/4 x 41/4\" X2 3/4\"in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately). |
| 43 | FLOORING |
| 44 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 45 | Flooring with Vetrified flooring tiles of size 600 x 600 x 8mm of approved colour and quality of required size laid in cement mortar 1:3 mix 20mm thick and pointing with the same mortar complete and finish very neatly etc complete |
| 46 | Paving the floor with best approved quality fine polished Rajesthan kotta stone slab of size 20mm with machine cut edges of size below 2\"0\" x 2\"0\" laid over a cement mortar 1:3 mix, fixing the slab in true tight angles with minimum possible width of joints and polishing the joints with cement mortar 1:3 mix and polishing with floor polisher to a high degree to finish and curing etc. complete as directed by depat. officers. |
| 47 | Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 48 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, |
| 49 | Supply, Delivery and Laying of Manglore Roofing Tiles height of 3 to 4m level, cost and conveyance and fixing in position etc complete |
| 50 | Finishing the top of roof with one course of machine pressedtiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete |
| 51 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.-1 m 3 |
| 52 | PLASTRING |
| 53 | Plastering with CM 1:5(One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materialsto work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specific |
| 54 | Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of sand)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standar |
| 55 | PAINTING |
| 56 | Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of\"approved quality and colour over a priming coat, including thoroughscraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty |
| 57 | Steel doors and windows |
| 58 | FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers PWD SOR Pg. No. 43 Sl.No.127 a |
| 59 | Fabricating Supply and fixing and position of MS doors with double leave made out of 18 gauge M.S. sheet, outer frame 35x35x5mm angle, inner frame 25x25x5mm angle, cross stiffner with MS flat 25x5mm, altrop tower bolts 2 Nos. two handles and six holdfasts completed welded and rivetted and one coat of red oxide painting including cost of all materials and labour etc., complete |
| 60 | UPVC Windowsupplying and fixing UPVC ( Un-PLASTICIZED Polyvinyl chloride) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with g/1mm 125GSMand 100% corrosion free, the profiles are multi chambered sectionwith wall thick of 2mm. The EPDM rubber (black color) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power points locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed or plainglass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and shouldhave key lockable action, security protective hinges, strong lockingsystems and as per sizefor arrestingnoise and energy loss. |
| 61 | PLUMBING WORKS (Water Works) |
| 62 | Conducting geological survey for selecting the suitable site for a borewell etc complete |
| 63 | Drilling of 6” borewell in hard rock area to any required depth as directed by the departmental officers concerned the rate including erection of PVC casing pipes in teh drilled hole, grouting the casing pipes if necessary and transportations charges for the rig and supporting vehicles etc complete. |
| 64 | From 60 m upto 90 m Depth ending from ground level |
| 65 | From 90 m upto 120 m Depth ending from ground level |
| 66 | From 120 m upto 150 m Depth ending from ground level |
| 67 | Supply and delivery of 150mm PVC casing pipes of approved quality etc., complete (Pg:22) |
| 68 | Reaming 200 mm dia pilot bore to 350mm dia bore asdirected by the TWAD Board Officer |
| 69 | Upto 60 m depth ending below ground level |
| 70 | From 60 m depth and upto 90 mt depth ending belowground level |
| 71 | From 90 m upto 120 m depth ending below ground level |
| 72 | From 120 m upto 150 m depth ending below groundlevel |
| 73 | Replacement of Underground Utilities 50mm DIA (HDPE Pipes) damaged during Earthwork excavations for pipe laying works including cost of additional earthwork excavation in all soils, including BT cutting, CCoads , removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of HDPE pipes, couplers, jointing materials and required specials, cutting, threading, conveying , aying, jointing and cost of refilling for the additional earthwork etc complete and as directed by the TWAD board officers. |
| 74 | Supply and delivery of 150mm PVC casing pipes of approved quality etc., complete |
| 75 | Supplying and delivery of 32mm dia GI B class pipes etc complete |
| 76 | Supplying and fixing of GI specials as follows |
| 77 | 50 mmGIPipe |
| 78 | 50 mm GIcoupling |
| 79 | 50 mm GI elbow |
| 80 | 50mm GIunion |
| 81 | 50 mmGIHex nipple |
| 82 | 50mm GM Non Return valve |
| 83 | 50mm GM Gate valve |
| 84 | Bore cover |
| 85 | Bore clamp |
| 86 | Erection of5 HP wet type submercible Pump set with necessary 50mm dia GI pipes, Couplings 2.5sq mm copper conductor and other necessary fittings etc complete and testing the pump set for 3 days tialrun (upto 5 HP) |
| 87 | Supply and delivery three phase 5HP Submersible pumpset 201pm x 125mtr suitable for 150mm DIA Borewell with isi mark is 8034 without panel board inloding cost and convayance of materal and transport charges etc completed (Texmor, CRI) |
| 88 | PVC insulated and sheathed 3 core flat type copper cable 2.5sq.mm conforming to IS 694/1990 |
| 89 | Supply and delivery of Three phase panel board with two level guard and auto start for 5HP motor including all cost and conveyance of all materials and labour charges etc. complete as per standard specifications |
| 90 | Supply and delivery of 63mm PVCpipe incuding cost and conveyance of all material and dransport charge etc Complete |
| 91 | Supply and delivery of 50mm GIpipe incuding cost and conveyance of all material and dransport charge etc Complete |
| 92 | Lowering 32mm GI pipe and specials to trench and laying to proper grade and alignment testing to the required pressure including conveyance of water for filling during testing. |
| 93 | Lowering 63mm PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste. |
| 94 | Lowering 50mm GI pipe and specials to trench and laying to proper grade and alignment testing to the required pressure including conveyance of water for filling during testing. |
| 95 | For Toilet Block |
| 96 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 97 | Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm \"P\" os \"S\"\" trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank. |
| 98 | S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in positionwith necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Colour |
| 99 | Supplying and fixing in position Indian make white glazed earthenware squating type urinal of best quality and approved make including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standard specification. (The squatting urinal should be got approved by the Executive Engineer before use on works). |
| 100 | Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings - 100 mm x 75 mm including all charges etc, complete as per standard specification. |
| 101 | Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications. |
| 102 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 103 | Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges.PWD S.I 213 & P.No 70 |
| 104 | 20mm PVC pipe |
| 105 | 25mm PVC pipe |
| 106 | 32mm PVC pipe |
| 107 | 20mm PVC Bend |
| 108 | 25mm PVC Bend |
| 109 | 32mm PVC Bend |
| 110 | 20mm PVC Tee |
| 111 | 25mm PVC Tee |
| 112 | 32mm PVC Tee |
| 113 | 20mm PVC Coupler |
| 114 | 25mm PVC Coupler |
| 115 | 32mm PVC coupler |
| 116 | 20mm PVC Elbow |
| 117 | 25mm PVC Elbow |
| 118 | 32mm PVC Elbow |
| 119 | 15mm x 20mm PVC Reducer |
| 120 | 20mm x 25mm PVC Reducer |
| 121 | 25mm x 32mm PVC Reducer |
| 122 | 15mm PVC SD Tap |
| 123 | 15mm PVC Pillar Tap |
| 124 | Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements. |
| 125 | 20mm dia Gate Valve |
| 126 | 25mm dia Gate Valve |
| 127 | 32mm dia Gate Valve |
| 128 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator).SD 23 |
| 129 | Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.SD 57 |
| 130 | Supply and run of 2 of 6sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour( Shop\"s DB Incoming Wires) fromPanel TO DB.SD59 |
| 131 | Supply and fixing of 5A/15 A 3 Pin combined flush type wall socket with 15A flush type switch concealed in suitable MS Box flush with wall with painting. SD 137 |
| 132 | Supply and fixing of 5 A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box, in flush with wall. SD 134 |
| 133 | Supply and fixing of 5 A 3 Pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall and concealed with 3mm thick hylem sheet.SD 135 |
| 134 | Supply and fixing of single box type 440 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specificationsSD 87 |
| 135 | Supply and fixing of 300 mm (12\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.SD 114 |
| 136 | UPVC VentilatorSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutterrofile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 137 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc,complete as per standard specification |
| 138 | Supplying and fixing Galvanised sheetwith 0.45mm thick (grey colour) of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed. |
| 139 | ELECTRICAL WORKS |
| 140 | Supplying and fixing of 4 metre length single bracket pole with base plate (250x250x6mm0 76.10mm OD x 3.65 mm thick x 4000mm Length in control box with foundation hardwares.etc complete as per standard specification. As per PWD SOR 2021-22 P.No.98 |
| 141 | SOLOR LIGHTING Supplying and fixing of 4 metre length single bracket pole with base plate (250x250x6mm0 76.10mm OD x 3.65 mm thick x 4000mm Length in control box with foundation hardwares. Solor pannel and battery back up andetc complete as per standard specification. |
| 142 | Supply and Fixing of 30 W LED Street Light Fittings as per PWD SOR P.No.69 |
| 143 | Supply and layingof 2 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.Ele. Data 2021-22SD -197 |
| 144 | Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulatedunshealhed SC.Cu.conductor of1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessorieswith TW switch box with 5A F.T. switch inflush with wall, coveredwith hylum sheet of 3mm t |
| 145 | Supply and fixing of single box type 4feet 36 W flu fitting complete with electronic ballast with TW round blockson wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 87 |
| 146 | Supply and fixing of fancy glass shade and 11W CFLfor BH Point. SD-80 |
| 147 | Main Panel boards (LT Electrical Installation Works ) |
| 148 | METERING PANEL-CT METER |
| 149 | Fabrication, Supply, Erection, Testing and Commissioning of CPRI certified Indoor panel board made up of 2mm thicknesspowder coated CRCA sheet steel with 50x6mmcu bus bar provision for all Phases and Neutral, door with industrial lock,main 3 Nos of 300A I/C Fuse carrierwith netural Link, 1 Sets -250A, CT with provision for EB Meter,Outgoing feeders,1 Nos-250A, TPN, SFU,1 set -Indicating lamps (R, Y, B), 1-Set of terminal blocks,1-Set of control fuses,The above panel board is to be erected with anchor fastners, bolt and nuts with suitableangles and channelsof size 75 x 40mm (Drawing to be approved by theEngineer-in-charge before fabrication.) |
| 150 | CT METER CONTROL. |
| 151 | Supplying,erecting,connecting & commissioning250 AMPS TPN FSUmetal sheet enclosure with necessaryInterconnections, cable box,brackets, screws,bolts,nuts,etc.for CT METER OUTGOING CONTROL |
| 152 | MAIN POWERPANEL |
| 153 | Fabrication, Supply, Erection, Testing and Commissioning of CPRI certified Indoor panel board made up of 2mm thicknesspowder coated CRCA sheet steel withcu bus bar provision (Ph-50x10mm for all phases Ne-50x8mm & E-2X40x3mm) with heat shrinkable insulation and SMC supports, door with industrial lock, Incomer400A TPN MCCB-2Nos.with interlock 2 lock one key, Out going:3nos of 125Amps TPN MCCB,15nos. of 63AmpsTPN MCCB,2set Metering Compartment consisting of 1no Digital multifuntional meter Accuracy class 1.0 with 3nos of CTs 400/ 5 amps ratio and RYB cluster type indication lamps with control fuses with provision for locking the indoor panel board complete etc.,as per IS standard .The above panel board is to be erected with anchor fastners, bolt and nuts with suitableangles and channelsof size 75 x 40mm (Drawing to be approved by theEngineer-in-charge before fabrication.) |
| 154 | LT ,1100V GRADEPVC / XLPE ARMOURED UNDERGROUND CABLE |
| 155 | Supply and fixing of 3.5 X 400SqmmPVC armoured LT UG cable in a trench to be excavated at a depth of 0.75metre putting 0.15 mt.Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD214) |
| 156 | Main electrical Roomto EB POST |
| 157 | Supply and clamping , fixing of 3.5 X 185 SqmmPVC armoured LT UG cable on post on Wall with MS Clamps (SD-211) |
| 158 | Main electrical Roomto capacitor panel |
| 159 | CABLE GLANDS |
| 160 | Supply and fixing of brass cable glandfor 3 1/2 X 400 SqmmPVC armoured LT UGcable with earth connection.(SD-196) |
| 161 | Ct meter to main panel to floor panel |
| 162 | Supply and fixing of brass cable glandfor 3 1/2 X 185 SqmmPVC armoured LT UGcable with earth connection. |
| 163 | main Panel tocapacitor panel |
| 164 | CABLE END TERMINATION |
| 165 | Supply and providing cable end termination of 3 1/2 X 400 SqmmPVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete. |
| 166 | Ct meter to main panel to floor panel |
| 167 | Supply and providing cable end termination of 3 1/2 X 185SqmmPVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete. |
| 168 | main Panel tocapacitor panel |
| 169 | EARTHING & LIGHTNING ROD |
| 170 | EARTHING |
| 171 | Earthing as per the ISI specification with an earth electrode of 2.1 mtr class \"B\" GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry |
| 172 | Metering panel -2 & transformer yard |
| 173 | Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class \"B\" GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. |
| 174 | Supply and run of 2 of No.8 SWG G.I wire for guarding with gradle with No.8 SWG G.I wire at the equal interval of 1.5 Metre.SD 75 |
| 175 | Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / Supports on wall / floor / ground for earth connection.SD 76 |
| 176 | Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2\" x 1 1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units(500V) 1 No. Neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete.SD 131 |
| 177 | Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulatedunshealhed SC.Cu.conductor of1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessorieswith TW switch box with 5A F.T. switch inflush with wall, coveredwith hylum sheet of 3mm thick with painting of suitable colour for open PVClight/fan point(For Electronic regulator) (5 pointsper coil). SD 22 |
| 178 | Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated single core unshealhed copper conductor cable of 1100V grade in suitable heavygauge MS conduit pipeonwall and ceiling with M.S. accessories inflush with wall with 150mm x 100 mm x 75mm MS switchbox with 3mm thick hylum sheet cover for 5A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point. SD 12 |
| 179 | 250 KVA, 22 KV / 433 V Outdoor Oil CooledTransformer with off Circuit (As per IS 1180-Level 2) |
| 180 | CCTV Camera |
| 181 | Supply fixing and erection of CCTV Camara including cost and Conveyance of all materials to site etc complete as perSpecification (5units / park) (PWD SOR Page (153 TO 157) |
| 182 | CCTV Camera (Q) |
| 183 | Network Video Recorder (PWD SOR PG.NO: 154) |
| 184 | Hard disc for NVR 4TB (PWD SOR PG.NO 155) |
| 185 | 24 Port Patch Panel (PWD SOR PG. NO: 156) |
| 186 | Rack With Accessories -4U (PWD SOR PG.NO: 155) |
| 187 | Armoured LAN & CCTV Cable (CAT-6) (PWD SOR PG.NO 153) |
| 188 | (29\" Led TV for display (Q) |
| 189 | TOTAL SOR ITEMS |
| 190 | NON SOR ITEMS |
| 191 | KIDS PLAY MATERIAL |
| 192 | Supplying and fixing of Age :- 3 to 14 YearsPlaying Area :- 5 Mtr. X 1.5 Mtr.Product Area:-3.5 mtr X 0.5 mtrPlat Form :- 2\"\" X 0.5 \"\" Rectangular MS pipeLeg Support:- 42mm OD MS pipeChute:- FRP RollerSlide Length:- 3 Mtr. (10ft)Ladder Frame:- 42mm OD MS pipeRailling - 25 mm OD MS pipeTread width:-90 mmRiser height:- 250 mmCenter Support:- 50mm M.S. Pipe |
| 193 | Supplying and fixing of Age :- 3 to 10 Yrs.Playing Area:- 4.Mtr. X 2.0 Mtr.Product Area: 3 mtr X 0.5 mtrPlat Form :- 2\"\" X 0.5 \"\" Rectangular MS pipeLeg Support:- 42mm OD pipeChute:- 0.5 Mtr. wideSlide Length:- 8ft MS MaterialLadder Frame:- 25mm.Tread width:-90 mm.Riser height:- 250 mm.Railing:- 25mm OD pipe |
| 194 | Supplying and fixing ofSafe Play Area :-8 mtr X 4 mtr . • Height 1.52m(5ft), Width of slide 0.5m(1.64ft), Length of Slide each 3m (10ft) & thickness of slide is 5 to 6 mm FRP sheet.• Main frame 2inch MS pipe• Platform of steel frame of 16g M.S. sheet with support of 25x25x3 angle• Ralling of 25x2mm (thickness) pipe• Stairs made up of rectangular pipe & FRP should properly fixed with support to each other with nut bolting system.• Platform of size 2ft x 2ft• Bridge ladder of 6ft length• Canopy of height 2to 2.5ft• Ideal for the age group 4-14yrs.• Four Seater Swing of length 3ft and seating made of 2\" x 0.5\" rec pipe.• One spiral climber is attached which is made of 25mm OD MS pipe.• One semicircle climber is attached which is made of 25mm OD MS pipe• Color: As per buyers\" choice |
| 195 | Supplying and fixing of Age :- 3 to 12 YearsCapacity:- 4 ChildrenDiameter:- 4feetHeight:- 4feetCenter Pipe:- 2inch MS pipeOuter frame:- 32 mm OD MS pipeHandle:- 25 mm OD MS pipeBearing:- Heavy Duty Ball Bearing No. 6312Color:- According to customers requirement. |
| 196 | Supplying and fixing of Age:- 4-14YrsCapacity:- 02 ChildrenArea:- 10feet x 4.5feetSafe Play Area:- 12feet x 7feet Height:- 8feetLeg Support:- 2inch MS pipeSeat:- Rubber seatBearing:- Sp. Forged Alloy Steel CasingSuspension:-6mm Dia. Heavy Duty ChainTop bar:-3inch MS. Pipe |
| 197 | Supplying and fixing of Age Group:-3-12 Yrs.Product Area:- 9ft x 1.5ftSafe Play Area:- 11ft x 3ftProduct Height:- 4ftStand Pipe:- 3inch MS pipeHorizontal Pipe:- 3inch MS pipeLength of horizontal pipe:- 8ft |
| 198 | Supplying and fixing of Age:- 3 to 12 YearsCapacity:- 2 ChildrenLENGHT:- 2 inch horizontal 8ft lengthTotal Height:- 4ftCenter Pipe:-2 inch MS pipeLeg Support:-3 inch MS pipeHandle:- 1 inch MS pipeHorse Seat:- FRP Seat of 3-4mm thickColor:- According to customers requirement |
| 199 | Supplying and fixing of Product Area:- 14ft x 14ftSafe Play Area:- 17ft x 17ftProduct Height:- 11feetMain Structure:- 42mm OD MS pipeRungs:- 32mm OD MS pipeColor:- As per buyers\" choice |
| 200 | Supplying and fixing of Product Area:- 13ft x 24ftSafe Play Area:- 18ft x 28ftProduct Height:- 14feet01 no. of FRP Land Slide;01 no. of FRP Spiral Slide;01 no. of FRP Tube Slide;01 no. of 4feet FRP Tunnel Bridge;01 no. of Rainbow Ladder;01 no. of Spiral Climber;04 nos. of 3\" x 3\" Square Deck with canopies;Deck Structure:- 2inch MS pipe;Spiral Main Pipe:- 3inch MS pipe;FRP thickness:- 4-6mm |
| 201 | Supplying and fixing of PLAY GROUND MULTIPLAY STATION-Product Area: 14M x 6MSafe Play Area: 16M X 8M |
| 202 | AERATOR & BIOHUT TECHNOLOGY |
| 203 | AERATOR TECHNICAL SPECIFICATIONS |
| 204 | AERATOR BODY with 6 nos. of plates (2 nos. Long size plates of Length 2500mm and Height 1200mm) and 2 nos. short side plates of Length 1500mm and Height 1200mm and 1 no. Top side plate of Length 2500mm and Breath 1500mm and 1 no. bottom plate of Length 2500mm and breath 1500mm. The welding shall be extrusion welding. The dimensional ratio of the aerator body is 2.5L X 1.5B X 1.2H. The number of exits port shall be 20 of dia 141mm and the number of suction ports shall be 20 nos. of dia 141mm. |
| 205 | SPLASH PROOF ENCLOSURE. |
| 206 | AERATOR INTERNALS with air distribution assembly with loop header fitted with distribution nozzles and draft tubes. 20 Nos. of Air Injection assembly with Injector, Connector, Gas Tube, Slotted Tube and Suction Tubes. Ballast Tank of suitable diameter based on the actual weight of system shall be provided. |
| 207 | BLOWER / ELECTRIC MOTOR High speed centrifugal blower with an aero dynamic impeller and casing for high volume air pumping. The motor shall be high speed motor with in-built or panel mounted VFD. The suction port of the blower shall be fitted with to avoid dust into the blower casing. The bottom of the blower assembly shall be provided with anti vibration pads to subside vibrations generated during high speed operations. |
| 208 | The Electric motor shall be permanent magnet or special high speed, horizontally mounted and further according to IEC Standard Type IE3 (High Efficiency) IP55. The power rating of the motor shall be 4KW with the maximum flow rate of 2400 Cu.m per hour, maximum pressure difference of 100mbar, minimum permitted blower speed of 12000rpm, and maximum permitted blower speed of 18900 rpm. Rated industrial voltage of 380 to 480V and rated industrial frequency of 50 to 60Hz. and rated current of 8A. |
| 209 | AERATOR EXTERNAL ACCESSORIES shall have 2 numbers of floats of diameter 312mm and Length 2140mm. The MOC of the floats shall be of polypropylene with end plates welded to it. The floats shall have enough buoyancy volume to keep the entire structure of aerator afloat on the water surface. 20 nos. of suction extenders of suitable length shall be provided. 20nos. of seal rings shall be provided. |
| 210 | AERATOR INTERNALS. BLOWER / ELECTRIC MOTOR.AERATOR EXTERNAL ACCESSORIES |
| 211 | BIOHUT BIOFILTER TECHNOLOGY |
| 212 | CIVIL WORKS – Manual Bar Screen Chamber CIVIL WORKS – SHELTER & ELECTRICAL ROOM etc. |
| 213 | SELF PRIMING SEWAGE PUMP |
| 214 | BAR SCREEN |
| 215 | PRIMARY CLARIFIER |
| 216 | BIOHUT |
| 217 | PIPES PVC / PP & VALVES |
| 218 | ELECTRICAL CONTROL CABINET & CONTROL SYSTEM |
| 219 | SEATING ARRANGEMENTS |
| 220 | Supply, Delivery and Providing Three Seater back slope Granite stiff sitting benches 5 feet in length 1.50 feet width 600x450x100 mm size Hard Granite slab side walls, 150x45x100 mm size bench slab back slope slab including cost and conveyance and fixing in position etc complete |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
