Panchayat Raj Department has published Tender For Annual Rate Contract Fy 2023-24 For Drilling Of Hand Pump And Tube Well Bore And Installation Of Hand Pump, Tube Well In Various Gram Panchayat Area Of Panchayat Samiti Sangod, District Kota. Submission Date for this Tender is 10-04-2023. Hand Pump Tenders in sangod Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Constructionoftubewellfromgroundlevelandupto100mtr.depthand above of following sizes in all types of soils in alluvium strata, unconsolidated formationsuchaspebbles,bouldersetc.by"bailing"methodandwithout gravelpackingasperIS:2800Part1:1991and IS:2800PartII:1979(both amended up to date) and technical specifications. The work includes formation of cavity at bottom by development with appropriate air compressor or bailer pumping and also lowering of casing pipe but excluding cost of the casing pipe. The tube well should have a throughout bore as per nominal dia of casing pipe. The work would be completed after obtaining sand free water. |
| 2 | Nominal bore 125 mm dia (PHED BSR 2022 ITEM NO. 2.5.1) |
| 3 | Nominal bore 150 mm dia(PHED BSR 2022 ITEM NO. 2.5.2) |
| 4 | ConstructionofTubeWellupto100mtr.depth inalltypeofrocksbyDTH system&overburdentoaccommodatecasingpipeoffollowingsizesinall typesofsoils&overburdenincludingloweringofcasingpipes,(ifrequired) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 andIS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work would becompletedafterobtainingsandfreewater.Thetubewellshouldhavea through out bore as per nominal dia of casing pipe. |
| 5 | Nominal bore 125 mm dia(PHED BSR 2022 ITEM NO. 2.45.2) |
| 6 | ConstructionofTubeWellupto100mtr.depth inalltypeofrocksbyDTH system&overburdentoaccommodatecasingpipeoffollowingsizesinall typesofsoils&overburdenincludingloweringofcasingpipes,(ifrequired) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 andIS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work would becompletedafterobtainingsandfreewater.Thetubewellshouldhavea through out bore as per nominal dia of casing pipe. |
| 7 | Nominal bore 150 mm dia(PHED BSR 2022 ITEM NO. 2.4.1) |
| 8 | Supply of ERW M.S. black casing pipe ISI marked{IS:1239(Part-1:2004)} Mmedium of following sizes at site of work. |
| 9 | 125 mm dia NB( Thickness of pipe 4.8 mm & mass of tube 16.40 Kg/m) (PHED BSR 2022 ITEM NO. 2.47.2) |
| 10 | Supply of ERWM.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to dateoffollowing sizes |
| 11 | 150 mm dia NB(Thickness of pipe 5.0 mm & mass of tube 20.13 Kg/m) (PHED BSR 2022 ITEM NO. 2.11.1) |
| 12 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size: |
| 13 | For 125 mm dia(PWD BSR 2022 ITEM NO 4.8.2) |
| 14 | For 150 mm dia (PWD BSR 2022 ITEM NO 4.8.3) |
| 15 | SupplyandinstallationofISImarkedIndiaMarkIIHandpumpsetcomplete with cylinder & 15 connecting rods. (PHED BSR 2022 ITEM NO. 2.51) |
| 16 | Supply&installationofGIpipe32mmmediumclass“B”withpipesockets (heavy duty).(PHED BSR 2022 ITEM NO. 2.50) |
| 17 | Installation ofIndia Mark II/III E.D. I & II hand pump set complete on existing platform..(PHED BSR 2022 ITEM NO. 2.54) |
| 18 | Constructionof185cm.diaplatformasperapproveddesign&drawingof UNICEF.(PHED BSR 2022 ITEM NO. 2.55) |
| 19 | Supply & Installation of single phase ISI marked submersible motor pump set ofthreestarorbetterratingofBEEandasperIS:8034-2018(pump)andIS 9283-2013 (motor) or as amended up to date ofapproved make of following duty condition with required accessories including making connection suitable fortubewell/DCB.Thejobincludesloweringofmotorpump,installationof complete fitting & accessories, jointing of electrical cables up to switch board, testingofsubmersiblepumpsetandinterconnectionuptowatermains, complete in all respect. |
| 20 | Up to 2.0 KW (PHED BSR 2022 ITEM NO. 2.14.1) |
| 21 | Above 2.0 KW (PHED BSR 2022 ITEM NO. 2.14.2) |
| 22 | SITC of ContactorOEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart andmade out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFFpush buttons,ammeter, voltmeter, indicating lamps etc.suitable for following rating motors complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . |
| 23 | 0.5 HP to 1.5 HP (DOL starter) (PWD ELECTRICALS 2022 ITEM NO. 21.13.1.1) |
| 24 | 2.0 HP to 3.0 HP (DOL starter) (PWD ELECTRICALS 2022 ITEM NO. 21.13.1.2) |
| 25 | Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 or amended up to date in PE 80 grade and class PN 10 of following dia. including HDPE/GIfittings andPVC ropeconfirming toIS 5175:1992or amendedup to date, along with clamping of submersible cable etc. complete in all respect.40 mm dia (PHED BSR 2022 ITEM NO. 2.25.1) |
| 26 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen freefor less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure "A" attached with this BSR 2.5 Sq.mm 3 core flat / Round (PWD ELECTRICALS BSR 2022 ITEM NO. 4.7.2) |
| 27 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure "A" attached with this BSR 3x 1.5 sq.mm (PWD ELECTRICALS BSR 2022 ITEM NO. 4.1.3) |
| 28 | Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.(PHED BSR 2022 ITEM NO. 2.22) |
| 29 | Providing & Laying of Polypropylene rope Confirming to IS:5175 for submersible pump of following sizes. complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 12mm (suitable up to 50 mm OD pipe) (PWD ELECTRICALS BSR 2022 ITEM NO. 21.3.1) |
| 30 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:500 Liter capacity (PWD BSR 2022 ITEM NO 2.26.3) |
| 31 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:1000 Liter capacity (PWD BSR 2022 ITEM NO 2.26.5) |
| 32 | P\F steel gate grelling and grills made of angletees square bars or other flat black pipe with hold footand fitting complete as per desion and drawingincluding weldingfabrication with primary coat of red oxide. (Rates as perGBSR 2022) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
