Tender For Addn/Alteration To Bldg No T-23 For Setting Up Of Otes Hall At Air Force Station Thoise Under Ge(Af) Thoise
Tender Value
19.50 Lakhs
Estimated cost
Bid Submission
27 Apr 2023
0 days left
EMD
39000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thoise → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Additional / Alteration To Bldg No T-23 For Setting Up Of Otes Hall At Air Force Station Thoise Under Ge ( Af ) Thoise
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Apr-2023 | CORRIGENDUM NO 01 DT 03 APR 2023 | BOQ | 15-Apr-2023 |
| 2 | 15-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-Apr-2023 |
| 3 | 22-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Apr-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr in Charge. |
| 2 | Demolition of cement concrete in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed by Engr in Charge. |
| 3 | M & L 75mm thickPCC 1:4:8 type D-2(40 mm graded crushed stone aggregate) as in sub base, of Paving finished even and rough complete all as specified and directed by Engr in Charge. |
| 4 | M & L for 75 mm thick PCC 1:3:6, type C-2 using 40 mm graded crushed stone aggregates as in plinth protection laid in slope 1:30 in alternative bays not exceedings 3 mtr in length, exposed surfaces finished even and smooth without using extra cement including raking out joinnts between panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed by Engr in Charge. |
| 5 | M&L for hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface using broken stones or boulders, complete all as specified and directed by Engr in Charge. |
| 6 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigment incl 50 mm sand filling under paver block complete all as specified and directed by Engr in Charge. |
| 7 | M&L for Chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement and no pigment incl CM 1:6 screed complete all as specified and directed by Engr in Charge. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr in Charge. |
| 9 | M& L 15 mm thick Screed bed or bedding CM of 1:4 for laying floor finishescomplete all as specified and directed by Engr in Charge. |
| 10 | M& L Non Skid ceramic joint free coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and joint free in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge. |
| 11 | M&L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and joint free in neat cement slurry and pointedin white or coloured cement to match and complete all as specified and directed by Engr in Charge. |
| 12 | M/L for rendering 15mm thick in CM 1:4 on surface other than fair face of brick-work finish the surface even and smooth complete all as specified and directed by Engr in Charge. |
| 13 | M&L for preparing new plastered surfaces and applying two coats of cement based paint of camouflage pattern over a coat of alkali resistant primer complete all as specified and directed by Engr in Charge.Note: The pattern of camouflaging shall be approved by GE. |
| 14 | M&L preparing newly plastered or unplastered surface of walls and applying three coats of white wash complete all as specified and directed by Engr in Charge. |
| 15 | Taking down plaster built in cement mortar complete all as specified and directed by Engr in Charge. |
| 16 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed by Engr in Charge. |
| 17 | M&L for Glazed ceramic coloured tiles of size 300x200mmx7 to 8 mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles complete all as specified and directed by Engr in Charge. |
| 18 | M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1.5 mm thick wall care putty complete all as specified and directed by Engr in Charge. |
| 19 | Demolition of Precast Concrete block walling, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engr in Charge |
| 20 | M&LPrecast cement concrete block Masonry with solid blocks of Type C-1 cement concrete 1:3:6, (using 20mm graded crushed stone aggregates), exc. 10cm in width and setting in cement mortar 1:4 complete all as specified and directed by Engr in Charge. |
| 21 | Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr in Charge. |
| 22 | Mild steel TMT bars 5 mm dia upto and including 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders complete all as specified and directed by Engr in Charge. |
| 23 | Form work to sides and soffits of floor or roof beams , lintels ,cantilevers, shelves etc finished rough surfaces of concrete flats, complete all as specified and directed by Engr in Charge. |
| 24 | M&L for RCC nominal mix 1:2:4 type B1(using 20 mm graded crushed stone aggregate) as in beams, lintels over 1.5 mtr span etc complete all as specified and directed by Engr in Charge. |
| 25 | M&L for rendering 15mm thick on fair faces of PCC Block masonryin CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr in Charge. |
| 26 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410W (Grade E- 250 ) Quality A, including for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts),providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete all as specified and directed by Engr in Charge. |
| 27 | S&F mild steel works as in flat iron wind ties for roofs incl securing with bolts and nuts , flat iron fillets etc including all necessary drilling , bolting or riveting etc and similar works confirming to Fe-290 Gde E-165 complete all as specified and directed by Engr in Charge. |
| 28 | M&L for PCC (1:2:4) Type B-1, Plain cement concrete with using 20mm graded crushed stone aggregate in lintels upto 1.5 m clear span, copings, bed plates, cills, steps: seismic and other similar bands, plinth course, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, complete all as specified and directed by Engr in Charge. |
| 29 | S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type orJ-type or cranked hook bolts in lieu of screw in roofs, walls etc. with grade of zinc coating 275, etc complete all as specified and directed by Engr in Charge. |
| 30 | S&F 0.63 mm thick Galvanised, plain mild steel sheeting in ridges, hips, valley gutters , drip and straight flashings (length and girth as fixed ) with grade of zinc coating 275 fixed to corrugated sheets in roofs, walls etc. , etc complete all as specified and directed by Engr in Charge. |
| 31 | Dismantling of wall and Ceiling boards (fibre, pulp insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed by Engr in Charge |
| 32 | S&F Anodised aluminium snap grid frame workof size 605 x 605 mm for false ceiling complete all as specified and directed by Engr in Charge. |
| 33 | M&L for 12 mm thick providing and fixing Gypsum Board thick in ceiling with screws as per manufacturer\"s instructions complete all as specified and directed by Engr in Charge. |
| 34 | M&L for second class soft wood plain fillets square, rectangular or triangular in section, sectional area exc 13 sq.cm & n.exc 25 sq.cm, clean sawn, secured with nails or brads complete all as specified and directed by Engr in Charge. |
| 35 | Plugging to walls complete for wood fillets, grounds moulding, boardings, etc. on cement concrete walls, at distance n. exc 1 mtr complete all as specified and directed by Engr in Charge. |
| 36 | M&L for 6 mm thick Veneered decorative plywood, grade 1 (5 Nos of ply) (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in wall panelling/linings complete all as specified and directed by Engr in Charge. |
| 37 | M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with modarent solution including washing and cleaning,etc. andall as specified and directed by Engg in Charge.. |
| 38 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr in Charge. |
| 39 | Taking down Chowkhat or frames not. exceeding 1.5 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed by Engr in Charge. |
| 40 | Taking down chowkhat with shutter exc. 1.5sqmbut n.exc 4 sqm each complete all as specified and directed by Engr in Charge. |
| 41 | S&F II nd class hard wood plain solid straight chowkats and frames , wrought, framed rebated on the solid , rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 42 | S&F for 35 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sided (feather edged), or veneered particle board with commercial face veneers, etc are provided with stiles and rails as specified in SSR Pt-I section 8, clause 8.24 (a) complete all as specified and directed by Engr in Charge. |
| 43 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below complete all as specified and directed by Engr in Charge.:- (i) Window frame : 62.3x38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.(v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces |
| 44 | Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engr in Charge. |
| 45 | S &F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr in Charge. |
| 46 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed by Engr in Charge. |
| 47 | S&F 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed by Engr in Charge. |
| 48 | S & F 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr in Charge. |
| 49 | S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr in Charge. |
| 50 | S&F Extruded Aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and directed by Engr in Charge. |
| 51 | S&FButt hinges, 100mm medium weight mild steel cold rolled complete all as specified and directed by Engr in Charge. |
| 52 | S & F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood fixed to wooden plugs with CP brass screws & cup washers.complete all as specified and directed by Engr in Charge. |
| 53 | S & F Bib taps cast copper alloy chromium plated with fancy type handle screwed down screwed foriron pipe or for brass ferrule and fixed complete for 15 mm bore complete all as specified and directed by Engr in Charge. |
| 54 | S & F 15 mm dia stop valves fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for union and fixed complete all as specified and directed by Engr in Charge. |
| 55 | S & F for 15 mm dia pillar tap with capstan heads chronium palted screwed down high pressure with or withoutletter \"Hot\" or \"Cold\" with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete all as specified and directed by Engr in Charge. |
| 56 | S &F PVC connection flexible pipe (Connecter) 15 mm dia, 450 mm long with check nut and bolt with washer complete all as specified and directed by Engr in Charge. |
| 57 | S & F in repair vitreous china squatting pan \"Pedastalpattern \"including connecting to \"P\" or \"S\" trap and to flush pipe antisyphonage pipe etc including PVC seat cover closed pattern with flat bottom , and cover and mild steel chromium plated or aluminium hinging device complete including provn of lime concerte bedding and making good to floor complete all as specified and directed by Engr in Charge. |
| 58 | S & F in repairs PVC low level flushing cistern 10 Litre capacity including necessary brackets incl connecting flush pipe etcand making good the disturbed surfaces complete all as specified and directed by Engr in Charge. |
| 59 | S&F in repair vitreous china,white, wash hand basin, ( Oval type) flat back size 550x400mm \"including MS brackets including cutting for and pinning in,but excluding waste pipe.fixed in granite complete all as specified and directed by Engr in Charge. |
| 60 | S & FPTMT shelf with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms)complete all as specified and directed by Engr in Charge. |
| 61 | S & F 15 mm dia galvanised steel water tubing medium grade to walls and ceiling or lying in floors. complete all as specified and directed by Engr in Charge. |
| 62 | All as per BOQ Srl item No 61.00 hereinbefore but for 20mm dia complete all as specified and directed by Engr in Charge. |
| 63 | S&F soap tray approx size 160x160x90 mm vitreous china embedded in wall complete all as specified and directed by Engr in Charge. |
| 64 | S&F in repair 20mm dia brass chromium plated tubular towel rails,D type 60cm long between flanges,complete all as specified and directed by Engr in Charge. |
| 65 | S&F vitreous china urinals,flat back of size 465mmX355mmX 265mm, white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed by Engr in Charge. |
| 66 | S&F for urinal partition white vitreous china of size 310x700 mm terminating about 40 cm above floor line complete all as specified and directed by Engr in Charge. |
| 67 | S&F 75mm PVC(SWR) bends any radius complete all as specified and directed by Engr in Charge. |
| 68 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor complete all as specified and directed by Engr in Charge. |
| 69 | Excavation in trenches n exc 1.5 m in depth and n exc 1.5 m in width and for foundation, laying of cable, GI pipe line and getting out in hard/dense soil complete all as specified and directed by Engr in Charge. |
| 70 | Returning filling in, including spreading , levelling , watering and well ramming in layers n exc 25 cm complete all as specified and directed by Engr in Charge. |
| 71 | Removing of surplus soil of excavated materials n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed by Engr in Charge. |
| 72 | M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete etc complete all as specified and directed by Engr in Charge. |
| 73 | M&L for concrete bed 1:4:8 type D2 (40mm graded crushed stone aggregate) 150 mm dia to drain pipe incl packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed by Engr in Charge. |
| 74 | M&L for salt glazed stonware drain pipe 150 mm dia laid in trenches and jointed as specified complete all as specified and directed by Engr in Charge. |
| 75 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or floor and complete all as specified and directed by Engr in Charge. |
| 76 | S&F 75mm PVC(SWR) vent cowl complete all as specified and directed by Engr in Charge. |
| 77 | M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr in Charge. |
| 78 | S&F 110mm bore PVC (SWR) \"P\" trap, including fixed with solvent cement complete all as specified and directed by Engr in Charge. |
| 79 | Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and directed by Engr in Charge. |
| 80 | M&L for RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregete) as in slabs supported on walls and the like complete all as specified and directed by Engr in Charge. |
| 81 | Form work to soffits of suspended slabs flat surface of concrete finishedrough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed by Engr in Charge. |
| 82 | M&L for Granite (of any type) 25mmwork (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed by Engr in Charge. |
| 83 | S&F three layer PUF Insulated tank capacity 500 Litres complete all as specified and directed by Engr in Charge. |
| 84 | Taking out old unserviceable point wiring complete fitting and fixturesof any type and any capacity complete all as specified and as directed by Engr-in-Charge. |
| 85 | Material and labour for point wiring forlight point or one fan point with1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade with PVC casing & caping andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as a earth wire connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. |
| 86 | All as per BOQ Srl item No 85.00 here-in-before but for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed by Engr in Charge. |
| 87 | All as per BOQ Srl item No. 85.00 here-in-before but for 5 Amp socket outlet independent board complete all as specified and directed by Engr in Charge. |
| 88 | Material and labour for Power point wiring for 15 amp socket outlet independent board controlled by one switch with using 2.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade with PVC casing & caping andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as a earth wire connected to common earth dolly complete all as specified and directed by Engr in Charge. |
| 89 | M&L ceiling rose, 3 terminal type PVC/ polycarbonate, isolated body complete all as specified and directed by Engr in Charge. |
| 90 | M&Lswitch piano flush type 5 Amps single pole one way complete all as specified and directed by Engr in Charge. |
| 91 | M&L switch socket combination 2 in 1, 5A flush type complete all as specified and directed by Engr in Charge. |
| 92 | M&L switch socket combination 3 pin 5,15A, combined flush type complete all as specified and directed by Engr in Charge. |
| 93 | Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. and connecting electrically to light point with suitable size flexible PVC wire 3 core copper conductor of size 0.75 sqmm complete all as specified and directed by Engr-in-charge. |
| 94 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr in Charge. |
| 95 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by Engr in Charge. |
| 96 | Supply & Fix in repair sheet metal enclosure DB\"s 4 way TPN double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick with metallic painting white series, 415 volts 200 Amps rated enameled bus bar 16 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed by Engr in Charge. |
| 97 | MCB Triple pole neutral(TPN) 240 volts, 63 Amps, 10 KA, C curve complete all as specified and directed by Engr in Charge. |
| 98 | MCB single pole neutral(SPN) 240 volts, 20 to 60 Amps, C curve 10 KA complete all as specified and directed by Engr in Charge. |
| 99 | MCB single pole (SP) 240 volts, 05 to 30 Amps, 10 KA, C Curve complete all as specified and directed by Engr in Charge. |
| 100 | XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 16 Sqmm, 4 -core, laid in trenches or passing through pipes, including suitable lugs and accessories for making connections at both ends, complete all as specified and directed by Engr in Charge. |
| 101 | Earthing complete with copper plate elecrode of size60 cm x 60cm x 3.15 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead copperwire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of Copper earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).Note : (i) Excavation work should be done by manpower only.(ii) Earth test should be done by contractor at his own cost and if required result is not found at site, entire earthing should by contractor again without accruing any extra cost to the department. No claim whatsover on redoing the earthing shall be admissible by the department to the contractor. |
| 102 | Supply and Laying of Steel water tubing 25 mm dia medium grade galvanised with all including short lengths, laid in trenchs/floors/wall complete all as specified and directed by Engr in Charge. |
| 103 | S&F Gun-metal, globeor gate valves, 25 mm dia ,heavy duty, with iron wheel head, screwed both ends (ISI marked)of following sizecomplete all as specified and directed by Engr in Charge. |
| 104 | M&L for PCC cable coverClass LV, Type I,flat,size 250 mm x 150mm x 40mm laid Flat in trenches over the cable with length 250mm perpendicular to the direction of cable, adjacent/ abutting each other complete all as specified and directed by Engr in Charge.Note:-Excavation and earth work to be measured and paid for separately |
| 105 | Sand cushioning to protection of underground cables, laid 8 cm before laying and 15 cm after laying of cable, and punned to form an overall layer of 18 cm thick, complete all as specified and directed by Engineer-In-Charge.Note: Punned down thickness of 18 cm shall be measured for payment purpose only. |
AI Tender Summary
Tender Timeline
Apr 22, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 15, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 22, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 27, 2023
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 29, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender