Grama Panchayat has published Tender For Ward 18 Purchase Of Materials- Mgnregs Works. Submission Date for this Tender is 08-04-2023. Construction Material Tenders in chelakkara Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Laying and Jointing PVC Pipe. Heading |
2 | 100 mm channel shoulder 2.5 m long |
3 | 20 mm dia holding down bolts |
4 | 200 mm Aluminium aldrop |
5 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
6 | Acrylic exterior paint |
7 | Adjustable span ESO+SI (2.35-3.40) |
8 | Adjustable telescopic prop 3 m (2.02-3.75m) |
9 | Anjili wood planks |
10 | Anjili wood scantls |
11 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
12 | Anodised Aluminium tower bolt (barrel type)300x10 mm |
13 | Aracanut post |
14 | Bamboo 25 mm dia 2.5 meter long |
15 | Bamboo/kallanmula |
16 | Beam clamp 300-380 mm (450-1070 mm) |
17 | Bitumen washer |
18 | Boulder 50mm to 200mm |
19 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
20 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
21 | Bright finished or black enameled mild steel screws 20 mm |
22 | Bright finished or black enameled mild steel screws 40 mm |
23 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
24 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
25 | Chromium plated Brass screws 25 mm |
26 | Chromium plated Brass screws 30 mm |
27 | Coarse sand (zone III) |
28 | Corner angle 45x45x5 mm 1.50 m long |
29 | Crates made of MEsh type 10x12 (D=100mm) Zinc coated (Mash wire diameter 3.00 mm) |
30 | Deharadun white lime |
31 | Diesel oil |
32 | Double clip (bridge clip) |
33 | Empty cement bag |
34 | Epoxy paint |
35 | Exterior primer |
36 | Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile |
37 | Fine sand (zone IV) |
38 | Flats up to 10 mm in thickness |
39 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
40 | G.I Limpet washer |
41 | G.I pipes 50 mm dia |
42 | G.I. pipes 25 mm dia |
43 | G.I. pipes 40 mm dia |
44 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
45 | Galvanised steel corrugated sheets |
46 | Galvanised steel J or L hooks 8 mm dia |
47 | Galvanised steel plain sheets |
48 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
49 | GI trafford profile sheet 0.35mm thick |
50 | Green Net 75% shade |
51 | Hire and running charges of loader |
52 | Hire charges of Diesel Road Roller- 8 to 10 tonne |
53 | Hire charge of 10 HP engine and pump set |
54 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
55 | Hollock ballies 125 mm diameter |
56 | Hydraulic Excavator (3D) with driver and fuel |
57 | Interlocking C.C. paver block (80 mm thick, M-30) |
58 | Iron hooks & eyes 100 mm |
59 | M.S. Tube 40 mm dia |
60 | Mild steel plates |
61 | Mild steel rivets |
62 | Mild steel round bar 12 mm dia and below |
63 | Mild steel tubes hot finished welded type |
64 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
65 | Polyurethene bags |
66 | Portland Cement |
67 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
68 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
69 | Puddle clay |
70 | PVC bend 63 mm dia |
71 | PVC Elbow 63 mm dia |
72 | PVC end cap 63 mm dia |
73 | PVC pipe 15 mm outer dia. 12kgf/cm2 |
74 | PVC pipe 63 mm outer dia. 4 kgf/cm2 |
75 | PVC Reducer 63x50 mm dia |
76 | PVC Tee 63x63x63 mm dia |
77 | PVC vent cowl 63 mm dia |
78 | Quarry Waste |
79 | Red oxide Zinc chromate primer |
80 | Roofing paint for iron sheets in red colour |
81 | Royalty for good earth |
82 | Safeda ballies 125 mm diameter |
83 | Second class kail wood in planks |
84 | Second class kail wood in scantling |
85 | Separation Membrane of impermeable plastic sheeting 125 micron thick |
86 | Single clip |
87 | Solid blocks of size 30x20x15cm |
88 | Solid blocks of size 30x20x20cm |
89 | Stainless steel screws 50 mm |
90 | Stone Aggregate(single size): 06 mm nominal size |
91 | Stone Aggregate(single size): 10 mm nominal size |
92 | Stone Aggregate(single size): 40 mm nominal size |
93 | Stone Aggregate(single size):20 mm nominal size |
94 | Stone for masonry work |
95 | Structural steel such as tees, angles, channels and R.S. joists |
96 | Synthetic enamel paint in black or chocolate shade |
97 | Through and bond stone size 24 x 24 x 39cm |
98 | Twisted steel/deformed bars |
99 | Vibrator (Needle type 40 mm) |
100 | Vitreous China orrisa type w.c. pan size 580 mm |
101 | Vitrified floor tile 60x60 cm |
102 | wall form panel 1250x500 mm |
103 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
104 | Welding by electric plant |
105 | Wire nails |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail