|
| 1 | Demolition of cement concrete manually / by mechanical means including disposal of materials within 500metres as per direction of Engr -in- Charge |
| 2 | M&L PCC 1:5:10 type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level |
| 3 | Demolition of RCC work manually / by mechanical means including stacking of steel bars and disposal of unserviceable materials within 50 metres lead as per direction of Engineer -in- Charge |
| 4 | M&L Steel work in built up tubularhot finished welded type tubes ( round, square or rectangular hollow tubes etc) trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer incluidng welding and bolted with special shaped washers etc complete |
| 5 | M&L Painting on new steel surface ( two or more coats ) incluidng a coat of approved steel primer ( red oxide primer)with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade |
| 6 | M&L Cement concrete 1:2:4 ( 1 cement ; 2 coarse sand : 4graded stone aggregte 40mm nominal size ) in pavements, laid in required slope and camber in panels as required incluidng consolidation finishing and tamping complete all as specified and as directed by Eng-in-charge. |
| 7 | Providing and fixingsteel work in gratings, frames, guard bars, ladders, railing, brackets, purlins, gates and similar workswelded in built up sections / frames work, incluidng cutting, hoisting, fixing in position and applying priming coat of approved steel primer complete all as specified and as directed by Eng-in-charge. |
| 8 | M&L providing and fixing 12.5mm thick tapered edge Glass reinforcedGypsum board conforming to IS : 2095 (Part 3) : 1996false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from MS sheet and galvanised with zinc coating of 120gms/ sqm ( both side inclusive ) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre, one flanges fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x 10 x,50mm of required length with nut & bolts of required size , Gypsum board of 12.5mm thick with white paper layer on face side of size 600 x 600 mm as directed |
| 9 | M&L providing and fixing aluminium frame work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling CP brass/ stainless steel screws, all complete as per directions of Engr-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately) :-(i)For fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 10 | M&L for aluminium work shutters of doors, windows & ventilators powder coated aluminium (minimum thickness of powder coating 50 micron)including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required incluindg the cost of EPDM rubber/ neoprene gasket required ( Fittings shall be paid for separately) |
| 11 | M&L proving and fixing glazing in aluminium door, window, ventilator shutters and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawings and the directions of Enginer-in-charge:-(i)With float glass panes of 5mm thickness ( weight not less than 12.50 Kg/ Sqm) |
| 12 | S&F 12mm thick both side prelaminated particle board to aluminium door, partition complete all as specified |
| 13 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster includng disposal of rubbish to the dumping ground within 500 metres lead complete all as specified and as directed by Eng-in-charge. |
| 14 | M&L 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and finished the surface fair and even without using extra cement complete . |
| 15 | M&L distempring Two or more coats on new workover a coat wall primer with Ist quality acrylic distemper , having VOC ( Volatile Organic Compound) content less than 50 grams / litre of approved brand and manufacture of required shade and colour including applying 1mm thick wall care puttycomplete as per manufacturer\"s specification |
| 16 | Removing dry or oil bound distemper, water prooofing cement paint and the like by scrapping , sand papering and preparing the surface smooth including necessary repairs to scratches etc complete |
| 17 | M&L distempering on old work ( wall/ ceiling) ( one or more coats)with 1st qualityacrylic distember ( Ready mix ) having VOC content less than 50 grams/ litre of approved brand over a coat of water thinnable cement primerand manufacturer to give an even shade |
| 18 | M&L providing and laying Double chargevitrified tiles size 600 x 600mm in floor in different size (thickness to be specified by the manufacturer ) with water absorption less than 0.08 % and conforming to IS : 15622 of approved brand & manufacturer, in all colours and shade , laid on 20mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.3 kg/Sqm incluidng grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily complete all as directed by Eng-in-charge. |
| 19 | M&L providing and fixing GI pipes 15mm dia nominal bore complete with GI fittings and clamps including making good the walls etc concealed pipe including painting with anti corrosive bitumastic paint cutting chases and making good the wall complete all as directed by Eng-in-charge. |
| 20 | M&L providing and fixing CP brass long nose bib cock 15mm nominal bore of approved quality conforming to IS standards and weighing not less 410 gms complete all as directed by Eng-in-charge. |
| 21 | M&L providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete |
| 22 | M&L providing and fixing white vitreous china laboratory sink with CI brackets, CP brass chain with rubber plug, 40mm CP brass waste and 40mm CP brass trap with necessary CP brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required :- (i)Size 600 x 450 x 200mm |
| 23 | M&L providing and fixing aluminiuim extruded sectionbody universal type hydraulic door closer ( having brand logo with ISI , IS : 3564, embosedon the body, door weight upto 36 to 80 kg and door width from 701 to 1000mm) with double speed adjustable with necessary accessories and screws etc complete |
| 24 | M&L providing and fixing 0.56mm aluminium color coated profile sheet with centre to centre pitch of 175mm , depth of 46mm, top crest width of 41mm, bottom valley width of 80mm overall profile width of 1144, cover width 1050mm at all height, levels and locations colour finish aluminium alloy roofing sheets of alloy IS designation 31500, temper H x8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. |
| 25 | M&L 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces and finished the surface fair and even without using extra cement complete . |
| 26 | M&L finishing wall New work ( Two or more coats applied @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm with 100 % premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives |
| 27 | M&L for preparation of surface and writing letter in (HINDI, ENGLISH & TELUGU) with black Japan paint of approved breand and manufacture and marking border all around with paint complete all as specified |
| 28 | M&L Wiring for One light point controlled by one way modular switch 6 Amps with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 29 | All as per item No.28 above but one ceiling fan point /Exh fan point controlled by one 5 Amps one way switch and regulator |
| 30 | All as per item No.28 above but one 3 pin 5 Amps switch socket outlet point on independent board |
| 31 | All as per item No.28 above but one 3 pin socket outlet 5 Amps on the same board with other switch. |
| 32 | M&L wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.outlet. 15 amps,independent:- |
| 33 | S&F modular switch one way 6 amps 1 module |
| 34 | S&F modular switch one way 16 amps 1 module |
| 35 | S&F modular socket out let 6 Amps 230 volts AC 3 pin multipurpose type complete all as directed. |
| 36 | S&F modular socket out let 6/16 Amps multipurpose complete all as directed by Engineer-in-Charge. |
| 37 | S&F ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete |
| 38 | S&F LED light fitting 1x20 W, 4ft Extruted aluminium batten suitable for surfacemountingcomplete |
| 39 | Supply & fix LED down lighter,fully diffused Surface/recessed mounted2\"x2\", 36W, 6500K, with high transmitive diffuser suitable for indoor complete |
| 40 | S&F MCB single pole 5 Amp to 32 Amps TPN complete all as directed by Engr-in-charge |
| 41 | S&F MCB SPN 240 Volts 40 Amps complete |
| 42 | Supply and fixing MCB TPN 40 to 100 Amps, 415V 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning |
| 43 | S&FSingle pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole20 Amp/32Amps MCB, SP 240V complete all as specified. |
| 44 | S&FTriple pole and neutral enclosure with3 pin and earth plug and socket complete with one single pole32Amps MCB, TPN,415V complete all as specified. |
| 45 | S&F sheet metal enclosure MCB DB SPN double door type AC 240 V 4 way with 200 Amps rated bus bar,including taking down old one complete and making good of distructed surface including taking down old one complete |
| 46 | S&F sheet metal enclosure MCB DB TPN double door type AC 240 V 4 way with 200 Amps rated bus bar,including taking down old one complete and making good of distructed surface including taking down old one complete |
| 47 | M&L for sub main wiring complete with 2 runs of 04 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB\"sincluding provision of 1 run of 04 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s one complete |
| 48 | M&L for sub main wiring complete with 4 runs of 16 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB\"sincluding provision of 1 run of 16 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s one complete |
| 49 | M&L for sub main wiring complete with 4 runs of 10 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB\"sincluding provision of 1 run of 10 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s one complete |
| 50 | M&L Earthing complete with GI earth plate electrode 600x600x6mm buried directly in ground vertically to a depth of not less than 2.7mtr below ground level than 1.5mtr below ground level connected to GI4mm wire by means of bolts washers etc made out of GI earth strip will be protected by galvanized iron pipe medium grade 15mm bore up to main distribution board/main switch including necessary excavation and earth work PCC 1:3:6 type CI (using 20mm graded stone aggregate) RCC cover 1:2:4 type B1 including necessary reinforcement etc complete all as shown on electrical plate No.3 of MES Sch Part-I., |
| 51 | M&L Earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required GI 4mm wire as earthing lead. |
| 52 | S&F Exhaust fan 300 mm sweep heavy matelic body with louvers 230 volts 50 Hz single phase by making suitable size of hole in an existing brick wall/stone wall and making good of disturbed surface with existing colour distemper complete all as directed by Eng-in-Charge. |
| 53 | Supply & fix Wall mountedtype fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting |
| 54 | Supply and install hi wall split units indoor and outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 2.0 TR complete all as directed. |
| 55 | Supply and fix Voltage stabilizer copper wound for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5KVA |
| 56 | M&L wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required for 2 x 4 sqmm + 1 x 4 sqmm earth wire |
| 57 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \"C\" curve DP MCB complete with connections, testing and commissioning etc. as required |
| 58 | S&F in walls/roofs PVCPipe 20 mm heavy duty for Condensing water line including making provision for fixing. |
| 59 | S&F in walls/roofs PVCPipe40 mm heavy duty for Condensing water line including fittings and making provision for fixing. |
| 60 | M&L for insulation to copper tubing of split type AC of cap 1.5 TR/2.0 TR with heavy duty rubber foam insulation, high density and thermal conductivity including packing material, reflactor tape and pvc tie complete all as specified and directed.Make- Armaflex / Aeroflex / Thermobreak |
| 61 | S&F flexible type water drain out pipe suitable for indoor unit of split AC as per existing type/model complete all as specified and directed. |
| 62 | Supply only Copper pipes 1/4 to 1/2\" dia, duly insulated with synthetic felt tube, for split / window type Airconditioner / refrigerator / water cooler complete with taking out old unserviceable one |
| 63 | All as per item No.62 above but of size 3/8 to 5/8\" dia |
| 64 | Supply only Brass flair nuts 1/2 to1/4\". |
| 65 | All as per item No.64 above but of size 3/8 to 5/8\" dia |
| 66 | Supply and fixing of 2 AC Timer Change over switch for ACs installed at AFNET Eqpt complete all as specified and as directed. Make : Dynamic, Model DIGI 2017 |
| 67 | M&L PVC insulated 3 core round flexible copper cable 1100 v grade of size 4.0sqmm Make:- Plaza/Polycab/Havells/Finolex |
| 68 | M&L PVC insulated 3 core round flexible copper cable 1100 v grade of size 2.5sqmm Make:- Plaza/Polycab/Havells/Finolex |
| 69 | Supply fabraction and election of exhaust Hood 6\"x3\"x2\" size made out of 22 gauge swag stainless steel of grade 202, factory welded exhaust riser not less than 6 mtr, Pre-drilled hanging Supports Roof or wall cub (flat), Exhaust fan Heavy duty 300mm sweep 02 Nos ,Stainless steel filters, Stainless steel grease Cup, equipped with stainless steel filters of suitable size with necessary supports complete all as specified and directed |
| 70 | Supply and install hi wall split units indoor and outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR complete all as directed. |
| 71 | Supply and fix Voltage stabilizer copper wound for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4KVA |
