Military Engineer Services-MES has published Tender For Certain Repairs To Joinery, Aluminium Partition With Fittings, Roof Treatment, Wall Finishes And Connected Civil Works In Drdl / Asl Under Age B/R -I Hyderabad. Submission Date for this Tender is 01-05-2023. Aluminium Furniture Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-04-2023 |
| 2 | 25-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-05-2023 |
| Sl. No. | Item Description |
| 1 | S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 2 | S&F powder coated anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.)including 5.5 mm thick glazing & taking down existing window / ventilator along with frame where required complete all as specified. |
| 3 | M&L for rectangular aluminium hollow section of size 101.6 x 44x2mm thick as in partition (including fixing with nut and bolt in floor and wall by drilling holes), powder coated of approved colour for both vertical and horizontal member including 5.5mm thick glass, 12mm thick particle board prelaminated on both side, aluminium legs, aluminium glazing channel, rubber beading as required complete (Size of panel nexc 01 Sqm each) incl taking down old partition all as directed. |
| 4 | All as per item No.3 above but as in door, powder coated, approved colour, including 5.5mm thick glass, 12mm thick particle board prelaminted on both side, rubber beading, aluminium glazing channels, two Nos handle D type 250 mm long,one no 200mm aluminium powder coated barrel tower bolt of extruded section, 100mm size brass mortice lock, 4 levers with two keys and one floor door spring per leaf incl taking down old door complete all as specified and directed. |
| 5 | Supply and fixing in repairs 200mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and directed. |
| 6 | Supply and fixing in repairs 150 mm size extruded aluminium aluminium alloy handles fabricated type, anodised fixed with stainless steel screws complete all as specified and directed. |
| 7 | Supply and fixingin repairs 140mm long floor door stoper of aluminium alloybody and toungue, anodised wirh hard drawn steel spring,fixed to door shutter fixed with stainless steel screws complete all as specified and directed. |
| 8 | Supply and fixing in repairsDoor closer hydraulically regulated,designation No. 2,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixedcomplete all as specified and directed. |
| 9 | Supply and fixing indoor closer hydraulically regulated,designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixedcomplete all as specified and directed. |
| 10 | S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each panes complete all as specified and directed. |
| 11 | Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each panes complete all as specified and directed. |
| 12 | Taking down aluminum door of any description and of any size and refixing the door after easing and perfectly closing/opening and function properly and making good to the damaged portions etc complete all as directed. |
| 13 | S & F as in repairs double action floor door spring hydraulically regulated made up minimum1.25 thick aluminium alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified |
| 14 | S & F as in repairs brass mortice lock vertical type with handle 100mm, 4 levers all as specified complete all as specified and directed. |
| 15 | S & F in repairs10 mm thick Aluminium grill of make "Deco grill" ,DG - 104 model or any other equivalent approved make fitted in to suitable Aluminium channel , "F" section and fixed to windows/ ventilators complete all as approved and directed. |
| 16 | M&L in repairs for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 17 | S&F continuous (piano) hinge, mild steel, bright finish,ISI marked, (width of fllap 40mm when open) . |
| 18 | S&F Aluminum anodized, barrel tower bolts of extruded section 150mm long, ISI marked |
| 19 | S&F Aluminum handles, fabricated type, anodized 100mm long,ISI marked. |
| 20 | S&F in repairs aluminium cleat of size 30x32x3 mm for fixing door / windows. |
| 21 | S&F in repairs Neoprene/EPDM gasket for fixing glass in door / windows. |
| 22 | S&F in repairs aluminium beading for fixing glass in door / windows. |
| 23 | S&F in repairs top pivots for aluminium doors. |
| 24 | S&F in repairs venetian blinds (vertical type) of 100mm wide straps with all fittings (to be matched with existing pattern) complete all as directed. |
| 25 | Taking down existing roof treatment of any description, any position with bituminous felt including plaster/loose concrete and removing rubbish to a distance exceeding 500m but not exceeding 1000m and roughening the surfaces of old concrete by picking, scraping, cleaning and washing down with water to remove all dust etc complete specified and directed by Engineer-in-charge. |
| 26 | M&L for roof padding concrete in B0 (1:2:4) using 12.5mm aggregate for levelling complete specified and directed by Engineer-in-charge. |
| 27 | M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 28 | M&L for rendering 10mm thick in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with WPC @3% by weight of cement shall be carried out complete all as specifed and directed by Engr-in-Charge. Note : WPC will be measured under separate item of this schedule. |
| 29 | Supply only intergalwater proofing compound complete all as specified |
| 30 | (a) M&L for mechanical cleaning of surface to make it free from any bituminous residue/dirt, oil and Greese etc all as directed by GE/Engr –in-charge. (b) M&L for cracks treatment by cutting open cracks and cleaning it from dirt, loose materials etc and filling with polyurethane based sealant with and including application of PU based primer all as directed by GE/Engr-in-charge. (c) M&L for applying water based polyurethane modified dispersion (single component cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same material after dilution of water at 50% or specific primer matching same material as per manufacturer specification and as directed by GE/Engr-in-charge. Make: Bostik, Berger, Fosroc, Sika, Asian or any other make approved by E-in-C’s Branch for PU based water proofing treatment. |
| 31 | Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc, Note :- The demolished material should be disposed off outside MoD land. The contractor shall quote his rates considering the above element, no extra paid on this. |
| 32 | Demolition of brick or stone masonary built in cement morter incl all quions, arches, pillar etc. complete all as specified & directed. |
| 33 | Material and labour brick work with sub class -B bricks old size, straight or curved on planexc 6m mean radiusbuilt in CM 1:6. complete all as specified & directed. |
| 34 | All as per item No. 33 above but as in half brick thick wall built in CM 1:4. |
| 35 | Material and labour 15mm thick rendering on other than faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement complete all as specified and directed. |
| 36 | M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emeny paper No.320 or 400 and wipe it clean complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC (DULUX) |
| 37 | M&L for preparation of old painted steel/iron surafces ofany description, not otherwisedescribed, over 10cm width or girthand applying one coat of synthetic enamel paint complete all as directed |
| 38 | M&L for preparation of old painted wooden surafces ofany description, not otherwisedescri-bed, over 10cm width or girthand applying one coat of synthetic enamel paint complete all as directed. |
| 39 | M & L for preparation of old plastered surfaces of wall and applying one coats of oil bound distemper complete all as directed. |
| 40 | M & L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as directed. |
| 41 | M & L for preparation of old plastered surfaces of wall and applying one coat of exterior emulsion paint of Apex ultima make complete all as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
