Tender For Supplying, Conjoining I / C Laying On Water Of High Quality Water Tight Hdpe Floating Boom Barrier And Fabrication, Installation And Testing Of Conveyor Belt System As Per Design In Najafgarh Drain And Supplementary Drain At Various Sites Und
Tender Value
14.43 Lakhs
Estimated cost
Bid Submission
06 Apr 2023
0 days left
EMD
28864
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supplying, Conjoining I / C Laying On Water Of High Quality Water Tight Hdpe Floating Boom Barrier And Fabrication, Installation And Testing Of Conveyor Belt System As Per Design In Najafgarh Drain And Supplementary Drain At Various Sites Under Jurisdi
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, Conjoining i/c laying on water of high quality water tight HDPE Floating Boom Barrier at various site in Najafgarh Drain and Supplementary Drain at differet sites whereever required by providing and connecting following materials :-(Length of Single Trash Boom-35 mtr. x 2 Sites + 30 mtr.)HDPE floating boom barrier (size 1.7 mtr.)Sloted Angle of size 40x40x5mmM.S Jaali of size as reqd.Nut, Bolt & Washer of size as reqd.Anchor bolt (Hook type-10mm)Nylon Rope of Size-10mm (minimum) |
| 2 | A) Fabrication of Z-type Conveyor Belt structure of size - Width 1.0 M x Length 7.20 M (approx.) by providing following material as per given design including complete painting of structural frame :-Rectangular M.S pipe 75x40x3mm of size 2.6 Mtr. + 0.9 Mtr. + 1.15x5 Mtr. or as required at site (for leg support) MS plate 400x250x5mm x 4 Nos. as required at site (for adjustment of legs) M.S Sheet for Z-type conveyor system 1.15x1.1 Mtr. + 4.90 x 1.1 Mtr. + 1.15x1.1 Mtr. or as required at site. C-channel 280x80x4mm x 7.20 Mtr. X 2 or as required at site for guide.Providing & fixing of Drive Roller (dia 105mm) with bearing & shaft of length 115mm complete. (2 Nos.)Providing& fixing of Return Roller (dia 100mm) with bearing & shaft complete. (2 Nos.)Providing& fixing of Guide Roller (dia 105mm) with bearing. (4 Nos.)Providing & fixing RCC Slab with Nut Bolt ( 3 Nos.)B) Providing & fixing of PVC Conveyor Belt (Width 1.0 Mtr. X Length 14.40 Mtr.) with cleant of size 250x5mm C) Providing & fixing Motor 3 HP, 3 Phase including gear box with MS Plate Box (make Havells/Hindustan/Crompton/ Kirloskar etc.) or equivalent. |
| 3 | Dismantling the Horizontal Swing Shaft (Part No. 32910J1-2) & Propel Clutch Drum R.H.S/L.H.S (Part No. 213J32) with the help of special tools, jig & fixture, cutting the screw with gas cutter, draging out the worn out bearings etc. etc., providing fitting Bearing (Part No. 25T816D11) 2 Nos., Bearing (Part No. 25Z259D41) 2 Nos., Bearing (Part No. 25Z494D9) 1 No., Cap Screw (Part No. 20Z547D78) 24 Nos., Oil Seal (Part No. 18Z715D4) 2 Nos., Oil Seal (Part No. 18Z715D5) 2 Nos., Oil Seal (Part No. 18Z479D11) 2 Nos., Oil Seal (Part No. 3218T69) 2 Nos., O Ring (Part No. 45Z91D104) 2 Nos., Hex Nut 1/2\" 13 NC (Part No. 2045V005) 8 Nos., Grease fitting (Part No.44Z1D10) 4 Nos. and re-fitted in machine complete. |
| 4 | Dismantling Horizontal Propelling Shafts & Drums (32910J1-1) LHS & RHS from the machine with the help of special tools, jig & fixture, cutting the screws with gas cutter, reholling, threading of drum & shafts as per actual shape and size of screws (8 Nos. each) draging out old bearing etc. etc. and providing fitting Bearing (25T816D11) 2 Nos., Bearing (Part No. 25Z259D41) 2 Nos, Bevel gear washer (Part No. 218T4) 2 Nos., Spacer (Part No. 218T311) 2 Nos, Bearing (Part No. 25Z494D9) 2 Nos., O, Ring (Part No. 45Z91D104) 1 No., Oil Seal (Part No. 18Z715D4) 2 Nos., Oil Seal (Part No. 18Z715D5) 2 Nos., Oil Seal (Part No. 18Z479D11) 2 Nos., Shim (Part No. 218T315) 10 Nos, Grease fitting (Part No. 44Z1D10) 4 Nos., Cap Screw (Part No. 20Z547D78) 24 Nos., Hex Nut 1/2\" 13 NC (Part No. 2045V005) 8 Nos., Oil Seal (Part No. 3218T69) 2 Nos. and refitting in machinecomplete. |
| 5 | Dismantling the Vertical Swing Shaft Assembly (Part No. 2910N-27-32-1) from machine draging out the vertical Swing Shaft (Part .No.3210N22) with special tools& Providing fitting, vertical swing shaft (Part No. 3210N22) 1 No., Oil Seal (Part No. 18F682D151) 1 No., Bearing (Part No. 25Z259D177) 1 No., \"O\" Ring (Part No. 45Z334D1) 1 No., Bearing (Part No. 25Z259D104) 1 No., Spacer (Part No. 218T608) 1 No., Spacer (Part No. 218T305) 1 No., Retainer (Part No. 3218T175) 1 No., Gasket 1/64\" thick (Part No. 220T295) 1 No.,and re- fitted with machine complete. |
| 6 | Dismantling the Bucket, Repair of 0.57 cum bucket by Providing & fitting M.S. Sheet 10mm thick size 1/2 Sqm. of reputed brand with the help of electric welding by using ISImake electrodes of reputed brand,make it proper shape and size as per actual. Providing fitting Spreader Bar (Part No. 3212Z31) 1 No., Pin (Part No. 3219T126) 4 Nos., Pin (Part No. 3219T46) 2 Nos., Pin (Part No. 3219T45) 2 Nos.,Trunion (Part No. 3218T61) 2 Nos. complete and re-fitting the bucketin machine after complete repair. |
AI Tender Summary
Tender Timeline
Mar 29, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 06, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender