Tender For Jal Jeevan Mission (Jjm)-Jal Jeevan Mission-Augmentation Of Cwss To N/F Phase I -Providing Distribution N/W And Fhtc To Vadanappally Gramapanchayath- Pwd Road Restoration-Pwd Road Restoration-General Civil Work, Thrissur-Kerala

Jal Jeevan Mission ( Jjm ) -Jal Jeevan Mission-Augmentation Of Cwss To N / F Phase I -Providing Distribution N / W And Fhtc To Vadanappally Gramapanchayath- Pwd Road Restoration-Pwd Road Restoration-General Civil Work. 1 Road Restoration Works 2 3.6:Excavation For Roadwork In Soil With Hydraulic Excavator Of 0.9 Cum Bucket Capacity Including Cutting And Loading In Tippers, Trimming Bottom And Side Slopes, In Accordance With Requirements Of Lines, Grades And Cross Sections, And Transporting To The Embankment Location Within All Lifts And Lead Upto 1000M 3 3.19.1:Loosening Of The Ground Upto A Level Of 500 Mm Below The Sub-Grade Level, Watered, Graded And Compacted In Layers To Meet Requirement Of Table 300-2 For Compacting Original Ground Supporting Sub-Grade Construction. 4 4.1.A.1:Construction Of Granular Sub-Base By Providing Graded Material, Mixing In A Mechanical Mix Plant At Omc, Carriage Of Mixed Material To Work Site, Spreading In Uniform Layers With A Motor Grader On The Prepared Surface And Compacting With Vibratory Power Roller To Achieve The Desired Density, Complete As Per Clause 401 Grading-I - Plant Mix Method 5 4.12:Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers With Paver In Sub- Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achieve The Desired Density. 6 5.1.A:Providing And Applying Primer Coat With Bitumen Emulsion ( Ss ) On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.70 - 1.0 Kg / Sqm Using Mechanical Means. 7 5.2.A:Providing And Applying Tack Coat With Bitumen Emulsion ( Rs ) Using Emulsion Pressure Distributor At The Rate Of 0.20 - 0.30 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Mechanical Broom. 8 5.3.2.A:Providing And Laying Bituminous Macadam With 80-100 Tph Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading Premixed With A Bituminous Binder ( Vg 30 ) , Transported To The Site, Laid Over A Previously Prepared Surface With Paver Finisher To The Required Grade, Level, And Alignment And Rolled As Per Clauses 501.6 And 501.7 To Achieve The Desired Compaction For Grading Ii - ( 19 Mm Nominal Size ) 9 5.6.2.A:Providing And Laying Bituminous Concrete With 80-100 Tph Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With A Bituminous Binder ( Nrmb ) @ 5.4 Percent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level, And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 507 Complete In All Respects For Grading - Ii ( 13.2 Mm Nominal Size ) 10 55.24:Providing And Laying Bituminous Concrete With 80-100 Tph Hot Mix Plant Producing An Average Out Put Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder ( Nrmb ) @ 5.4 Percent Of Mix And Filler, Transporting The Hotmix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 507 Complete In All Respects ( Using 7% Shredded Plastic ) Grading - Ii ( 13.2 Mm Nominal Size ) 11 8.13:Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads On Bituminous Surface @ 250 Gms Per Sqm Area, The Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35. The Finished Surface To Be Level, Uniform, And Free From Streaks And Holes.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	03-04-2023	Date extension corrigendum	Date	10-04-2023
2	11-04-2023	extension corrigendum	Date	17-04-2023

INR 1800 /-

INR 20300.0 /-

Refer document