Military Engineer Services-MES has published Tender For Repair To Tiling, Brick Work, Plastering, Wall Panelling, False Ceiling, Roof Covering And Misc Repairs In Rr Units Kishtwar, Bhandarkot And Dul Area Of 9 Sector Under Ge (I) 873 Ews. Submission Date for this Tender is 26-04-2023. Civil Work Tenders in bhaderwah Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Apr-2023 | Corrigendum No 01 | BOQ | 19-04-2023 |
| 2 | 19-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-04-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Non skid JOINT FREE coloured ceramic tiles 7 - 8 mm thick area of each tile exceeding 0.18 Square metre but not exceeding 0.38 Square metre in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 3 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 4 | Non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:6complete all as specified. |
| 5 | Glazed JOINT FREE ceramic coloured tiles in skirting/dado 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:3 as backing coat rough finished surface complete all as specified. |
| 6 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposal of unserviceable material, debris andrubbish to a distance not exc. 100m, complete all as specified and as directed. |
| 7 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and disposal of unserviceable materials, debris and rubbish to outside cantt area complete all as specified & directed. |
| 8 | Machine cut kota stone slab flooring, 18-20mm thick as per sample kept in AGE(I)’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 20mm screed layer in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified. |
| 9 | Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified. |
| 10 | 25 mm thick plain cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in levelling course as reqd, complete all as specified and directed. |
| 11 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 12 | Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 13 | Taking down cement plaster or cement lime plaster on stone or brick walls or concrete surfaces etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified. |
| 14 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete allas specified and directed. |
| 15 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified. |
| 16 | 0.63mm thick galvanised corrugated mild steel sheeting with grade of Zinc coating of 275 gms/Square metre with two corrugation side lap and at least 150 mm end lap , fixed with L or J type or cranked hook bolts, in roof, walls etc, complete, all as specified. |
| 17 | Description all as per item No. 30.00 above, but except sheet complete all as specified and directed |
| 18 | 0.80mm thick plain galvanised mild steel sheeting with 275 gm/Square metre Zinc coating as in ridge, hips, valley gutters, drip and straight flashing fixed withL or J type or cranked hook bolts, complete, all as specified. |
| 19 | Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 20 | Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 21 | Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified |
| 22 | Rolled mild steel work in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary length i.e. within 20mm of the length indicated),conforming to Fe-410-0 or Fe-310-0, complete all as specified & directed. |
| 23 | Dismantling of timber scantling under 40sqcm and over in section unframed work,as in fillets, rails, posts, rafters, purlins etc , complete all as specified. |
| 24 | Second class hard wood as in scantling, clean sawn fixed in position with nails, framed work, complete, all as specified and directed. |
| 25 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified & directed |
| 26 | 4 mm thick non asbestos fiber cement plain building boards in false ceiling on and incl aluminium snap grid work 605 x 605 mm withusing 36.5mm x 23.5 mm x 1.5 mm thick main tee, 23.5 x 23.5mm x 1.28 mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall including necessary supporting hanger with 3 mm dia GI wire and J bolts washer nuts for securing frame work to ceiling suspended @ 120 cm c/c both ways, complete all as specified and directed. |
| 27 | 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and as directed. |
| 28 | S&F PVC wall panelling made up of PVC hollow panels 25/30cm in width and 10mm thickness interlocking pattern of approved shade and design fixed to wall or ceiling, fixed in repair, all as specifed and directed. |
| 29 | Taking down shutters of any description exceeding 1Square metre and not exceeding 2Square metre each and refixing in the same opening, complete all as specified and directed. |
| 30 | Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of alkali resistant primer, complete as specified and directed. |
| 31 | Preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
