Military Engineer Services-MES has published Tender For Repair To Flooring, Hardstanding, Pathways, Joinery, Plumbing, Retaining Wall, Drains, Fencing Including Periodical Services And Other Misc Works In Rr Units At Kishtwar, Bhandarkot And Dul Area Of 9 Sector Under Ge (I) 873 Ews. Submission Date for this Tender is 26-04-2023. Footpath Work Tenders in bhaderwah Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Apr-2023 | Corrigendum No 01 | BOQ | 19-04-2023 |
| 2 | 19-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-04-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 2 | Walling of random rubble stone masonry brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. Note:- PCC bond stones shall be deducted from the stone masonary. |
| 3 | Description all as per item No. 10.00 above, but except stone complete all as specified and directed |
| 4 | Providing precast cement concrete 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) as in bond stone (for stone walling) including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified. |
| 5 | Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses, built in cement mortar, complete all as specified and directed. |
| 6 | Raised pointing to random rubble masonary, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:4, complete all as specified and directed. |
| 7 | PCC 1:2:4 type B-1 (Nominal mix), using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified. |
| 8 | PVC (SWR) pipes 110mm bore any length single socketed with rubber ring joint laid in weep holes, fixed, complete all as specified and directed. |
| 9 | Broken stone or boulders in hand packing (any thickness) at back of walls etc. and raising (or lowering) to the required level, complete all as specified. |
| 10 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and disposal of unserviceable material, debris andrubbish to a distance not exc. 100m, complete all as specified and as directed. |
| 11 | 100 mm thick plain cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in as in sub base complete all as specified and directed |
| 12 | 50mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor, hardstanding etc, finished surfaces even and smooth without using extra cement including use and waste of formwork to divide the area into panels, complete allas specified and directed. |
| 13 | 75 mm thick plain cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection,and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed. |
| 14 | Plain cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in as in sub base complete all as specified and directed. |
| 15 | Factory made (rectified) precast concrete rubber moulded designer chequered tiles any colour, shape and size not less then 200mm x 200mm x 25mm thickness (compressive strength not less than 250 Kg/Sqm) set, jointed and pointed with grey cement and pigment over and including 20mm thick CM 1:6 screed bed or bedding layer complete all as specified and directed. |
| 16 | Machine pressed precast concrete interlocking paver block any shape and size as approved by GE confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and no pigment laid over and including 25mm thick sand cushioning, complete all as specified and directed. |
| 17 | Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified. |
| 18 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and disposal of unserviceable material, debris andrubbish to a distance not exc. 100m, complete all as specified and as directed. |
| 19 | Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:6) including necessary form work complete all as specified and directed. |
| 20 | TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed. |
| 21 | Dismantling posts or struts embedded in concrete (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground Concrete, brick work masonry etc complete all as specified |
| 22 | Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed. |
| 23 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified and directed. |
| 24 | Mild steel work as in hand rails, half round or other steel section or core for wooden hand rail, straight portion drilled and countrsunk for ballusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cuttings, tops to shapes, as directed, drilling, holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 all as specified. |
| 25 | Mild steel screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other ends, or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long, diameter of shank 11 to 15mm, complete all as specified & directed. |
| 26 | Dismantling fencing wire mesh, any type (chain link fencing, GI mesh etc) complete all as specified |
| 27 | Supply only chain link fencing of 3.15mm dia galvanised steel wire, conforming to IS : 2721 -2003 including line wires, straining bolts, binding wire etc., complete all as specified and directed. |
| 28 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire, complete all as specified and directed. |
| 29 | Mild steel round bars , 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stiffner to hold the chain link fencing, complete all as specified |
| 30 | Dismantling of galvanised barbed wire of any description or in any position complete and removing from site all as specified and as directed. |
| 31 | Galvanised, 2 strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing and tying at crossings with and provision of galvanized mild steel wire, staple or steel pins, etc complete all as specified and directed |
| 32 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Square metre eachincluding taking out hold fast complete all as specified and directed. |
| 33 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5sqm but not exceeding 4.0 Square metre eachincluding taking out hold fast complete all as specified and directed. |
| 34 | Taking down shutters of any description exceeding 1Square metre and not exceeding 2Square metre each, complete all as specified and directed. |
| 35 | 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. |
| 36 | Factorymade Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24 (a) kiln seasoned and pressure treatedall as specified. |
| 37 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixed complete alll as specified and shown in relevant drg |
| 38 | Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, "C" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) all as directed. |
| 39 | Extruded aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 40 | Aluminium anodised, barrel tower bolts of extruded section of size 200mmISI marked and fixed, complete all as specified and directed. |
| 41 | Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 250mm long, complete all as specified. |
| 42 | Mild steel butt hinges, medium weight, cold rolled (ISI marked), 100mm long, complete all as specified. |
| 43 | Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100mm long, complete all as specified. |
| 44 | Aluminium powder coated window with three track window frame with sliding shutters, two shutter with 4mm thick tinted glassand one shutter with stainless steel wire mesh 0.36 nominal dia and width of aperture 1.40mm,fixed with rubber gasket and aluminium beading, clips with all fittings with and including duco pattern grill of size 75mm x 75mm fixed as per manufacturer instructions including making good disturbed surfaces of wall to match with existing, complete all as specified and directed. |
| 45 | Anodised aluminium frame for doors fixed with side hung shutters, glazing fixed with including 4.8mm thick tinted glass, clips, rubber packing, rubber gasket with aluminium beading, screws etc. frame made aluminum box sec of following sizes complete all as specified :- (a) Frame 65x38x1.60mm thick with rawl plug (b) Middle and lock rail : 150x44x1.6mm thick (c) Bottom rail : 150x44x1.6mm thick (d) Top rail/style : 85x44x1.6mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100mm long steel butt hinge, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver, aluminium stopper, hydraulically regulated door closer (make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete. |
| 46 | Stainless steel wire mesh 0.36 nominal dia and width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified. |
| 47 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 48 | Framed work such as grills, grating etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred, iron doors, ladders, balusters, walkway, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 49 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed. |
| 50 | Fixing only 15mm dia GI steel water tubing, medium grade, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified. |
| 51 | 15mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified. |
| 52 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed. |
| 53 | Fixing only 20mm dia GI steel water tubing, medium grade, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified. |
| 54 | 20mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified. |
| 55 | Bib taps long body 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs complete all as specified and directed. |
| 56 | Stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed. |
| 57 | Pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered "Hot or Cold" with long screwed shank and fly nuts screwed for iron pipe complete for 15mm bore pipe, fixed in repairs all as specified & directed |
| 58 | 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified. |
| 59 | PVC connection 15mm size with length 600mm with PTMT nuts fixed in repair, complete all as specified and directed. |
| 60 | Soap dishchromium plated cast type andfixed including plugs with chromium plated brass screws fixed in repairs complete all as specified and directed. |
| 61 | Towel rail brass chromium plated, 20mm dia, D-type, 60cm long between flanges, fixed in repairs, complete all as specified and directed. |
| 62 | Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling including cutting for and pinning in ends of brackets or erecting stand etc., fixed in repaircomplete all as specified and directed. |
| 63 | Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm,white, with integral foot rests (excluding flushing cistern and flush pipe) incl provision of cement concrte bedding, PVC "P" or "S" trap 100mm dia, connection to trap and fushing pipe, anti syphonagefixed in repairs complete all as specified and directed. |
| 64 | Vitreous china wash down water closet pan (pedestal pattern) white, complete incl flushing pipe, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. completefixed in repairs complete all as specified and directed. |
| 65 | Vitreous china urinals, bowl type of size 430 x 370 x 340mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe), complete, fixed in repair, complete all as specified and directed. |
| 66 | PVC valve less syphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints fixed in repairs complete all as specified and directed. |
| 67 | Brass CP wash basin mixerfor mixing hot & cold water screwed down for iron pipe of 15mm bore and fixed in repair, complete all as specified. |
| 68 | Brass CP wall mixerfor mixing hot & cold water screwed down for iron pipeof 15mm bore and fixed in repair, complete all as specified. |
| 69 | Water jet for EWC chromium plated with PVC connection, fixed in repairs, complete all as specified and directed. |
| 70 | Health Faucet, ABS body with 1 metre SS braided connection pipe for 15 mm bore pipe,fixed in repairs complete all as specified and directed. |
| 71 | 600mm x 450mm size bevelled edge mirror with border, selected quality 5.5 mm thick glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs complete all as specified and directed. |
| 72 | PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in trenches/ floors, fixed in repair, complete all as specified and directed. |
| 73 | PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in trenches/ floors/ fixed to wall, fixed in repair, complete all as specified and directed. |
| 74 | PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified and directed. |
| 75 | PVC (SWR) bends any radius 110mm bore, complete all as specified. |
| 76 | PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 77 | Taking down cement plaster or cement line plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified and directed |
| 78 | Rendering 15mm thick in cement mortar 1:4 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified and directed |
| 79 | Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of alkali resistant primer, complete as specified and directed. |
| 80 | Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats cement base paint of approved brand all as specified and directed. |
| 81 | Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper, complete all as specified. |
| 82 | Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified. |
| 83 | Two coat of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete, all as specified. |
| 84 | Preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
