Tender For Air Compressor Unit Design, Manufacturing, Testing, Pre-Despatch Inspection, Supply, Installation, Commissioning And Warranty Of Compressed Air Unit System As Per Annexure Attached. , Design, Manufacturing, Inspection, Testing & Supply Of Compressed Air Unit System Consisting Of Following 1 ) Supply Of Variable Speed Oil Injected Rotary Screwtype Air Compressor Capacity 240 Cfm, 8 Kg ( F ) / Cm2 , 2 ) Supply&Installation Of Refrigerated Air Dryers Capacity 300 Cfm, Max. Working Pressure16 Kg / Cm2, Connected Load 1.6 Kw, Ref. Gas R22, Pressure Dew Point 2 4 Oc, Max. Inlet Temp 45 Oc, Compressors, Dew Point Meter & Accessories Reputed Make. , 3 ) Design, Manufacturing, Supply, Testing, Installation And Commissioning Air Receiver With Accessories As Per The Following Specification, 3.1 Capacity : 3000 Litres 3.2 Type : Vertical Air Receiver 3.3 Working Pressure: 10 Bar 3.4 Design Pressure: 11 Bar 3.5 Test Pressure: 16 Bar ( Will Be Witnessed By Our Representative ) 3.6 Design Temperature: 60 Oc 3.7 Material Of Construction: Is 2062 3.8 Inside Painting: 2 Coats Of Black Bituminous 3.9 Outside Painting: 2 Coats Of Red Oxide + 2 Coats Of Hammer Tone Paint. Accessories: Pressure Gauge: 1 No, Temperature Gauge: 1 No, Safety Valve: 1 No, Auto Drain Valve: 1 No, Manhole: 1 No, Flanged Connections For Compressed Air Inlet & Out Let Flanges. , 4 ) Supply & Installation Ofpre Filters ( 2Nos.For Installation & 4Nos. As Spares ) As Per Following Specification- Moc: Aluminium Pressure Die Casting, Filter Element: Borosilicate, Capacity: 300 Cfm, End Connection: 1-1 / 2”Inchbsp, Particle Removal: 1?, Pressure Loss Not More Than: 0.03 Kg ( F ) / Cm2, Maximum Oil Carryover: 5 Mg / M3. , 5 ) Supply & Installation Of After Filter / Fine Filters ( 2Nos.For Installation & 4Nos. As Spares ) As Per Followingspecification- Moc: Aluminium Pressure Die Casting, Filter Element: Borosilicate, Capacity: 300 Cfm, End Connection: 1-1 / 2” Inch Bsp, Particle Removal: 0.01?, . Pressure Loss Not More Than: 0.1Kg ( F ) / Cm2, , Maximumoil Carryover: 0.01Mg / M3. , 6 ) Supply & Installation Of Activated Carbon Filter For Oil Removal ( 2Nos.For Installation & 4Nos. As Spares ) , Quantity: 6 Nos. As Per Following Specification- Moc: Aluminium Pressure Die Casting, Capacity: 300 Cfm, End Connection: 1-1 / 2” Inch Bsp, Maximum Oil Carryover: 0.003 Mg / M3, Maximum Working Temperature: 90 Oc, Pressure Loss Not More Than:0.06 Kg ( F ) / Cm2 , 7 ) Spare Parts For Variable Speed Oil Injected Rotary Screw Air Compressor For 2 Years Continuous Operation- Lubricant ( Suitable For The Above Oil Injected Screw Air Compressors. ) , 8 ) Air Filter Element ( Suitable For The Above Oil Injected Screw Air Compressors. ) , 9 ) Oil Filters ( Suitable For The Above Oil Injected Screw Air Compressors. ) , 10 ) Oil Fine Separator ( Suitable For The Above Oil Injected Screw Air Compressors )
