Swachh Bharat Mission Gramin has published Construction Of Toilet Block At Various Sahariya Boys And Girls Hostels District Baran. Submission Date for this Tender is 13-04-2023. Toilet Bathroom Tenders in baran Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 10-Apr-2023 | DATE EXTENSION | Date | 13-04-2023 |
Sl. No. | Item Description |
1 | Earth work in excavation by mechanical means ( Hydraulic Excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms , lift upto 1.5 m , including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter . All kinds of soils |
2 | Providing and laying in position cement concrete including curring , compaction etc. complete in specified grade . Excluding the cost of centering and shuttering - All work up to plinth level in cement mortar 1:4:8 (1cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) . |
3 | Random Rubble stone masonry with hard stone in foundation andplinth in Cement Sand Mortar above 30 CM thick walls in :Cement Mortar 1:6 (1-Cement:6-Sand). |
4 | Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand. |
5 | Centering and Shuttering with plywood or steel sheets including strutting , propping bracing both ways and removal of formwork for foundation , footings , strap beam , raft , bases of columns etc. |
6 | Providing and laying in position specified grade of cementconcrete for all RCC structural element upto plinth level including curring , compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand ) and making good the joints and cost of plastizers (if required ). Excluding the cost of centering , shuttering and reinforcement. M20 grade Nominal Mix Design Mix. |
7 | Random rubble dry stone kharanja under floor . |
8 | Providing and laying in position cement concrete including curring , compaction etc. complete in specified grade excluding the cost of centering and shuttering . All work up to plinth level.M 10 grade Nominal Mix 1 : 3 : 6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ). |
9 | Brick work with clay flyash F.P.S. brick ( IS 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : Cement mortar 1 : 6 ( 1 cement : 6 coarse sand ) |
10 | Half Brick work in with mechanised autoclaved flyash lime bricks conforming to IS :12894 : 2002 Of class designation 100 in superstructure above plinth level upto floor V level in .cement mortor 1 : 4(1 Cement: 4 Coarse sand ) |
11 | Providing and fixing T iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15X3 mm lugs, 10Cm long embedded in cement concrete blocks 15X10X10 cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer . |
12 | Providing and fixing square bar "s or other flat welded to window , ventilatore etc. |
13 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings , as per direction of Engg . incharge but excluding cost of chowkhats : including two coats of anit - corrosive red oxide primer paint |
14 | Add extra for double leaf shutter 20% sqm |
15 | Supplying and Fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150 mm distance . |
16 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing bothways with steel prop wooden members and removal of formwork for superstructure upto 4.50 mtr. height above plinth , for suspended floors, roofs, landing staircases , balconies, girders, cantilevers, bands,coping bed plates, anchor blocks, sills, chajjas, lintel,beam etc. |
17 | Providing and laying in position specified grade of cementconcrete for RCC structural element upto floor five level including curring , compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand ) and making good the joints and cost of plastizers (if required ). Excluding the cost of centering , shuttering and reinforcement for Beams,suspended floors, roofs, girders having slopes upto 15°,landings,balconies, shelves, chajjas, lintels,bands,plain window sills,staircases and spiral staircases etc.M20 grade Nominal Mix /design mix |
18 | Providing and fabricating reinforcement for R.C.C. work including straightening , cutting , bending , placing in position and binding ( including cost of binding wire ) all complete up to floor five level . ( " Original producers " who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS : 1786 ) Cold twisted deformed bars ( IS : 1786 ) . |
19 | Providing and fixing precst cement concrete coping 1:2:4 mix 50 mm thick complete with specification . |
20 | Plaster on new surface on wall in cement mortar 1:4includingrackingof joints etc. complete fine finish: 20 mm thick. |
21 | Outer 25 mm |
22 | 6 mm thick cement plaster to ceiling of mix 1:3 (1cement:3 fine sand) |
23 | Construction of soakage well in all type of soil with 300 mm thick dry masonry , top and bottom 300 mm course in CM 1 : 6 , 80mm thick stone slab , jointing of slab in CM 1 : 3 , Ralthal , Kharanja , 40 mm thick M - 15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr Size 240 Cm . dia outside & 240 Cm . depth . : |
24 | Construction of septic tank in all types of soil with 40cm thick masonry in CM 1:6, 15 Cm thick C.C. bed of 1:5:10, M-15 grade C.C. floor and RCC slab covering with M15 grade c.c. floor, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos. stone foot rests of approved design , two no. 450 mm dia each Ferro cement cover with frame , earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr. Size 400 x140x150 cm . ( for 50 users ) with 115 mm thick RCC ( M - 20 ) slab with Tor steel reinforcement 10mm @ 15 cm c / c bothways including shuttering complete in all respect . |
25 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1 : 6 m , 10 cm thick C.C. 1 : 5 : 10 in foundation , 20mm thick insider plaster in Cm 1 : 6 , finished with floating neat cement , 50mm thick M - 15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr .-do- size 450 x 450mm depth upto 0.5 M Cement cover with frame |
26 | Inside size 600 X 450 mm depth upto 0.50 M cement cover with frame . |
27 | Providing and fixing 1st quality standard white , grey , ivory , fume red brown , light green , light blue and other light shades glazed tiles confirming to IS : 13753 & IS : 15622 of size 200mm x 300mm in walls , floors , steps , pillars etc . laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete ( excluding the cost of cement plaster on walls and pillar ) . |
28 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS: 13755 and IS: 15622 colours such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
29 | Providing and applying white cement based putty over plastered surtface to prepare the surface even and smooth complete .New plastered surtface (three or more coats) |
30 | Distempering with oil bound washable distemper of approved brand andmanufacturer to give an even shade including all scaffolding :new work ( two or more coats ) over and including scrapping and priming coat with cement primer . |
31 | Painting exterior surface of wall with 100% acrylic exterior paint of approved brand andmanufacturer to give an even shade with two or more coatsincluding prepartion of base with sand papering , primer , putty ,etc complete in all respectincludingscaffolding and safty provision New work |
32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work . |
33 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. |
34 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor |
35 | P & F water closet Seat Covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-I Black for EWC. |
36 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS : 7231. |
37 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 510 mm x 400 mm |
38 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick |
39 | P & F Grating of approved quality/make: Stainless Steel Sheet size 125mm dia. |
40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm dia nominal bore B class |
41 | 25 mm dia nominal bore B class |
42 | 32 mm dia nominal bore B class |
43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 15 mm dia nominal bore B class |
44 | 25 mm dia nominal bore B class |
45 | 32 mm dia nominal bore B class |
46 | S&F G.I/. Union ISI Marked In G.I. Pipe line as required complete in all respect of size. 15 mm dia nominal bore |
47 | 25 mm dia nominal bore |
48 | 32 mm dia nominal bore |
49 | C.P. Brass bib cock,15mm nominal bore. |
50 | C.P. Brass bib cock Long body, 15mm nominal bore weight not less than 690 gm |
51 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: C.P. Brass 15mm nominal bore. |
52 | C.P. Brass Concealed Stop Cock 15mm. |
53 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) with 37 cm long pipe and nut. |
54 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : CP brass Concealed 25mm nominal bore. |
55 | P & F Full way valve (IS : 778 mark or wheel valve of approved make Gun-metal 15 mm dia nominal bore |
56 | Gun-metal 25 mm dia nominal bore |
57 | Gun-metal 32 mm dia nominal bore |
58 | P & F ball cock (IS: 1703 Mark) with rod & pvc ball complete make 750 gm 15mm nominal size |
59 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved des ign:500 litres capacity. |
60 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe. (Excluding cost of pipe) 150 mm dia S.W. pipe around 160mm rigid PVC pipe |
61 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coppler 110 mm dia |
62 | Coppler75 mm |
63 | Plain Tee 110 mm dia |
64 | Plain Tee 75 mm |
65 | Bend 87.5110 mm dia |
66 | Bend 87.5 75 mm |
67 | 110 mm dia |
68 | Pipe Clip 110 mm dia |
69 | Pipe Clip 75 mm |
70 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 75 mm dia |
71 | 110 mm dia |
72 | 160 mm dia |
73 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M |
74 | Add extra if R.C.C slab of designed thickness & reinforcement is provided on manhole in place of stone slab( Actual area of R.C.C slab to be measured). |
75 | S & F following sizes of ISI marked ( IS:14927P-II ) PVC casing capping along with accessories like coupler, inner, outer, elbow, square box, tee etc. on surface wuth screws, expansion fastners as required. 25 mm X 12 mm |
76 | writing of light point/fan point exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kv grade (IS:694) of approved make on surface ISI marked (IS:14927 p-II) PVC casing capping & it"s accessories, round tiles, Moulded PVC Modular box with, 6 AModular switch, Modular plate with grid plate, screw, making connections, testing etc. as required. Short point (up to 3 mtr.) |
77 | Medium point (up to 6 mtr) |
78 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVCinsulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make on surface ISI marked ( IS : 14927 P-II ) PVC casing capping&it"s accessories, moulded PVC Modular box with earth terminal, 6 A modular switch, 6 A modular socket, modular plate with grid plate, screw, making connections, testing etc. as required. On board |
79 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked ( IS:694) of 1.1 KV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2X1.5 sq.mm |
80 | 2X2.5 sq.mm + 1X1.5sq.mm |
81 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanised modular on surface or in recessed with suitable size of grid plate with cover plateincluding cost of modular 16 amp. switch and socket outlet , making connection, testing, etc. as required. |
82 | S & F follwing sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using clamps, fastener as required including cutting the wall , covering conduit with wire mess and making good the same as required. Group-2 25 mm dia |
83 | P & F 240/415 V ACMCB with positive isolation ofbreaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828 (1996)/conforming to IEC 60898 in existing board/ sheets including making connections , testing etc. as required.Single pole MCB 6 A to 32 A rating |
84 | P & F 240/415 V isolator conforming to IS: 13947-III/IEC 60947-3 on existing board/ sheet including making connection, testing etc. as required. Double pole Isolator 30 A / 40 A rating |
85 | P & F following modular accessories made out of unbreakable and fire retardent poly carbonate with silver contacts including making connections testing etc. as required. 6 A one way switch |
86 | P & F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with 100 Amp copperbus bar, shorting link, neutral, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB termination with copper lux, testing etc. as required. Single door(Single Phase) 8 way |
87 | P & F strip fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating/stove enamelled non corrosive UV resist EP channel)complete with accessories(Low loss copperchoke, starter, starter seat)/Electronic choke with terminal block duely prewired with copper conducter including making connection, testing etc. as required(Without tube)1x36 watts with EB. |
88 | P & FFluorscent tube rod in existing fixtures as required. for existing FTL / CFL fixture as required. T5 Lamp 14 Watts |
89 | P/I aying PVC / XLPEinsulated & PVC sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS : 7098 P-I of Group of approved make in ground as per IS:1255 including excavation of 30 cm x 75cm size trench, 25cm thick under layer of sand, Iind class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size 6 sq mm, 4 core . |
90 | P & F ISI marked (IS :3854) 6 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. |
91 | P & F 3 pin 6 amp flush type socket including cutting hole in tile and making connection testing etc. as required. |
92 | P & F ISI marked 6 amp bakelite batten/ angle holder including making connection testing etc. as required grup-2 (E071500) |
93 | P & F 36 Watt IP 20 LED 2" X 2 " fixture , Recessed / Surface type , having sfficacy of not less than 100 lumen / watt , made out from CRCA housing and with high purity / transmisvity duffuser for uniform light distribution high efficiency driver electronics and in compliance toIEC standrad (integral with light fixture ), life time of more than 50000 burning hours , CCT 6000K(minimum), CRI >80 driver maintaining PF>0.9 Surface Mounting LED Downlight 18/20W |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail