Public Health Engineering Department-PHED has published Tender For Supply, Delivery, Installation & Commissioning Of Submersible Pumping Machinery And Other Electro-Mechanical Accessories At Replacement T/W No. I Of Jhitka W/S Scheme Under Jhargram Mechanical Division, Phe. Dte In The Dist. Of Jhargram.. Submission Date for this Tender is 06-04-2023. Submersible Pump Tenders in jhargram West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply and delivery of following materials at site:- Submersible pumping machinery directly coupled with submersible motor at 415 V (±10%), 50(± 3%) Hz. Material of Construction : Pump bowl : Housing : C.I. Pump / Motor shaft : SS-410. Impeller : Bronze/CS/SS NRV Size: 65 mm Starting Method : S/D Speed : 2900 rpm max. This items will be procured based on yeild test report of T/well and best efficiency point as per direction of EIC. (Test certificates, Material of Construction and H & Q characterstic curve should be provided at the time of delivery) Pump shall be of 3 star BEE rating as per current schedule of the Bureau of Energy Efficiency (Revision 04, Schedule 7 w.e.f. 01.02.2020) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. Discharge(Q) - 22 m3/hrand Head (H) - 60 mtr. |
| 2 | 80 mm dia UPVC (Standard type) Column pipe with both side threaded and one side socketed (For T/W No. I) a) 3 Mtr. Long |
| 3 | b) 1.5 mtr Long |
| 4 | c) Top Adoptor (C.I.) |
| 5 | d) Bottom Adoptor (C.I.) |
| 6 | M.S fabricated split type suitable tube well cover as per tube well housingwith necessery clamping arrangementincluding holes with column pipe ,air pipe and cable entry etc. (For T/W No. I) |
| 7 | 102 mm. dia 0-10 kg/cm² range wall mounted bourden type pressure gauge complete for tubewell outside the pump house including brass cock & fittings. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 8 | 102 mm. dia. wall mounted depth gauge with suitable dia. and length of steel air pipe with all fittings including supply of one good quality Hand pump for tubewell outside the pump house. (This cost includes 15 mm. dia. G.I. pipe approx. 90 ft. length and specials) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 9 | Anti-snapping safety device for above pump by supplying 1"" dia. Nylone rope of required length (double) including supply of all necessary materials as required. ( For T/W No. I) |
| 10 | M.S suspension clamp with necessery nuts, bolts & washersetc.suitablefor 80 mm dia pipe( Size 500 mm X 80 mm X 8 mm each) (For T/W No. I) |
| 11 | 80 mm dia, P.N. 1.0, CIDF Non return valve conforming to IS: 5312, part-I. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 12 | 80 mm dia, PN-1.0, CIDF sluice valve conforming to IS:14846. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 13 | 80 mm dia, (PN-1.0) CIDF, wafer type butterfly Valve operated by three phase actuator conforming to IS:13095/1991, IP 68. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 14 | 80 mm dia heavy type suitable length CI/MS Black pipes (for delivery header & backwash line for pumps under sl no.1, along with necessary bends, tees, specials, fittings , viz flanges, bolts, nuts, gaskets, concentric enlarger , MS dismentling joint, for erecting main discharge pipeline etc. including providing MS/Bricks/PCC support for laying of pipes, valves as required to make the installation complete as per satisfaction of E.I.C. (This includes the cost of supply, delivery of header & short piece of required length to erect the delivery & backwash pipe lines) (For T/W No. I) |
| 15 | 1.1 KV grade, 2.5 sq.mm. 3 core PVC insulated & sheathed copper flat submersible cable as per IS 694/Part -I. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 16 | 1.1 KV Grade 415 V, 4 core 16 sq.mm. PVC sheathed XLPE insulated Al. armoured cable conforming to IS:7098 (PART-1) 2011 with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 17 | 1.1 KV grade, 12 core, 1.5 sq. mm. Copper Control Cables, Solid Copper Conductor & Balance Stranded Copper, XLPE Insulated PVC Innersheathed, Armoured extruded PVC Type ST2 Sheathed as per IS 7098 (Part 1) 1988. (For actuator connection from panel) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 18 | 415 V, Three phase PLC Panel with minimum 2 mm thick CRCA sheet, degree of protection IP-54, conforming to IS - 8623 with suitable size Bus bar, Digital Voltmeter, Digital Ammeter, Contactor, Delay timer, MCB, Valve Actuator starter etc. with PLC Logic & UPS .i) 7.5 - 12.5 HP with SD (Star-Delta) starter. (Drawing & Bill of materials shall be approved by E.I.C) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. SPEC : As per Specification attached. (For T/W No. I) |
| 19 | 15 KVA, 3 phase oil cooled type servo motor operated copper wound lineVoltage Stabilizer, having unbalanced 200 - 500 V input voltage, and 415 (± 1%) output voltage , Auto/manual servo voltage stabilizer with U/V,O/V,O/L protection with MCB at output side, MCCB at input side, Ammeter etc. as per I.E rules and as per instruction of EIC. Stabilizer capacity shall be selected based on selected pump capacity. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 20 | Automatic plunger type chlorinator for feeding accurately controlled dosage of chlorine solution lnto the water by connecting metering pump with flow rate of water 0 -100 LPH with maximum pressure of 10 Kg/Cm2 suitable dosing pump & other accessories on the delivery pipe line as required, the pump shall be coupledwith 0.5 hp motor having three phase power and 1440 RPM (± 4%). (Motor Make- CGL/KEC/ABB/Any approved make) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 21 | Hard wooden board (450 mm X 304.8 mm x 25 mm thick) (For T/W No. I) |
| 22 | 63 Amp, 240/415 V Porcelain fuse unit (Base & Bridge). Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. ( For T/W No. I) |
| 23 | 63 Amp, 415 V, ICTPN (Iron Claded Triple Pole Neutral) main switch in sheet steel enclosure having rewireable type fuse grip. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. ( For T/W No. I) |
| 24 | 63 Amp, 415 V Bus-Bar chamber having 4 nos. Aluminium Bar. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (For T/W No. I) |
| 25 | 63 Amp, 4 pole on load change over switch. Make: Havells (category code IHBFFE0063)/any other equivalent approved make. (For T/W No. I) |
| 26 | 6-32 Amp, 10 kA, 240/415V, 50 Hz, SP MCB conforming to IS / IEC: 60898-1, "C" characteristics. (6 Amp -2 nos., 10 Amp- 1 no., 16 Amp-1 no.) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. ( For T/W No. I ) |
| 27 | 10 Amp, 10 kA, 240/415V, 50 Hz SPN MCB conforming to IS / IEC: 60898-1, "C" characteristics. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019with latest amendments.) |
| 28 | 8 way SP&N Double Door horizontal Distribution Board (I/C 2 + O/C 6) conforming to IS 13032 & IS 8623 and IP 42/43. Make :- Legrand (model no. 5076 11) (For T/W No. I) |
| 29 | LED street light luminarie IP 66 LM6-HPDC Housing Street light aerodynamically designed with better thermal management/ Potted driver is to be provided, the luminaire & housing should be from the same manufacturer (cat no- BRP052 LED 045 CW SLMR FG S1 PSU GR, System Efficacy greater than 100 lumen/watt) Make - Philips/equivalent and same technical specification of Havells. The manufacturer has to provide LM79/LM80 reports corresponding to the luminaire/LED Chip respectively along with type test Certificate. The luminaire manufacturer should have an in house NABL Accredited testing facility. (For T/W No. I) |
| 30 | PVC mouldedchair without arm. (Make:- Nilkamal/Supreme/Cello) (For T/W No. I) |
| 31 | PVC moulded table of 850 x 850x 725 mm size. (Make:- Nilkamal/Supreme/Cello) (For T/W No. I) |
| 32 | Installation of the above supplied item Installation, testing & commisioning of above supplied Pumping Machinery ,MCC, valves etc. (item no 1 to 14, 18 to 19, 21 to 28) by jointing submersible cable within the tubewell situated outside the pump house by making derrick arrangement by assembling the column pipes properly and fitting-fixing the pressure gauge, depth gauge, air pipe etc. in position and erection of delivery line & Backwash line with the C.I specials and Tee including mending damages goods etc. all complete as per direction. This also includes the charges for laying submersible cable, copper control cable from tubewell to control panel by underground trench and saddle on wall as required and connection with required feeders of panel all complete. (For T/W No. I) |
| 33 | Supply and installation of 2 mm thick, powder coated anticorosive painted G.I.Fabricated outdoor mounted kenopy type Cable Jointing Box having four legs and six nos. 100 Amps Al Bus bar, hinge type front having IP 55 protection &locking arrangement as per direction of E I C . (For T/W No. I) |
| 34 | Making suitable size pump foundation base ( Size: 1.00 mtr. x 1.00 mtr. x 1.5 mtr.) with supplying cement, sand, stone chips etc. in the portion of (4:2:1) including plastering, neat cement finishing including painting etc. all complete as per direction of EIC. (i) Tubewell outside pump house. (For T/W No. I) |
| 35 | Making required nos. of brick pillar 0.25 mtr. X 0.25 mtr. for supporting of valves, actuator and pipes with 12 mm thick plaster and net cement finish including painting all complete as per direction of E.I.C (For T/W No. I) |
| 36 | Installation & commissioning of above chlorinator with supplying & drawing of suitable length 1.1 KV grade 3 x 36/0.3 (2.5 sqmm) single core stranded "FRLSH"PVC insulated & unsheathed copper wire (approved make) from suitable feeder of installed panel board through 20 mm size PVC rigid conduit "FR" (Precision make) incl. necy. fittings as required and continuous earthingfrom nearest earth grid. This includes the cost of making required height brick foundation base with neat cement finishing by supplying all required materials and testing the entire set asper direction of EIC. (Height of tank foundation shall be higher than that of chlorine machine. In case of installation of Iron Elimination Plant (IEP) at head work site, the suction and delivery pipeline for chlorination shall be drawn from suitable position at the discharge pipeline of IEP) (For T/W No. I) |
| 37 | S&F of 3" dia 1.5 mt minipole with baseplate to be fixed on rooftop incl. S&F of 1.5 mtr long arm bracket (removable type) incl. CC (6:3:1) muffing(450 X 450 X 600) with 3 mm thick neat cement finish & painting incl. S&F of 200 x 150 x 100 mm 16 SWG GI loop box with necessary power connection by3 x 22/0.3 (1.5 Sq.mm) (2 nos. P & N and 1 no. ECC) "FRLSH" PVC insulated & unsheathed copper wire (Approved make) in 20 mm size PVC rigid conduit (Precision make) incl. necy. fittings as required as per direction of EIC. (for 12 m length @ 102/mtr.) (For T/W No. I) |
| 38 | Laying of cable (as in item no. 16) on wall/surface incl. S & F of MS saddles with earthing attachment in 10 SWG GI (Hot Dip) wire, making holes etc. as necy. mending good damages and painting all complete as per direction of E.I.C. |
| 39 | Supplying and fixing of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofcable (as in item no. 16) all complete as per direction of E.I.C. |
| 40 | Finishing the end of cable (as in item no. 16) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materialsall complete as per direction of E.I.C. |
| 41 | Making internal wiring/electrification of the Pump house by (2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) single core PVC insulated multistrand FRLSH Grade flexible copper wire through 20 mm PVC conduit pipe/casing by supplying one no. 40 Amp, 10kA, 240/415V, 50 HzSPN/DP MCB Isolator conforming to IS / IEC: 60947-3, "C" characteristics. (As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments) with required module PVC Board & piano key type switch. (ave. run 6 mtr). i) LED Tube set point - 2 nos., Bulk Head light point- 1 no., 5 pin 6 Amps. Plug point- 1 no., 16 Amp socket & switch- 1 no,with necy. earthing arrangement & one fan point (Total point 6 nos. points) including drawing power by suitable gauge (2.5 sq.mm) of copper wire from installed PDB panel to switch board through DB for P/H no. I through 20 mm PVC casing capping (precision make, LMS) as per direction of EIC (fittings should be of Philips make & wiring should be with continuous earthing arrangement and 20 W two nos. 4 ft long LED tube light setsPHILIPS /Astra Line /other equivalent make, one no. bulk head, one no. 0-4 step fan regulator (Humfree), fittings etc to be supplied by agency). (For T/W No. I) |
| 42 | (a) Earthing with 50 mm diameter G.I. pipe 3.64 mm thick x 3 Mtr. (10ft.) long and 1 x 4 SWG G.I. wire (4 Mtr.long) 13 mm diameter x 80 mm (3 inch) long G.I. Bolts, double nuts, washer including S & F of 15 mm diameter G.I. pipe protection (1 Mtr. Long) to be filled with bitumen partly below ground level to an average depth of 3.65Mtr.(12ft.) below the ground level and restoring the surface duly rammed.i) For soft soil by ISI Medium GI pipe. (For T/W No. I) |
| 43 | (b) Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm diaholes on the GI pipe. (For T/W No. I) |
| 44 | (c) Extra for treatment of soil by salt and charcoal coke for pipe electrode. (For T/W No. I) |
| 45 | (d) Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.Length of busbar is 0.5 mtr. (For T/W No. I) |
| 46 | (e) Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. (For T/W No. I) |
| 47 | Supply, delivery and fitting-fixing of 230 volt1200 mm sweep AC ceiling fan withball bearing complete with all accessories such as blade, canopy, fork, down rod etc. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019. (For T/W No. I) |
| 48 | Add GST @ 18 % |
| 49 | Add Cess @ 1 % |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
