Construction Of Pink Community Toilet And Urinal Near Block Office
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Apr 2023
0 days left
EMD
33658
Bank guarantee accepted
Document Fee
700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sukrauli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Pink Community Toilet And Urinal Near Block Office
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excvation in foundation in ordinary soil (Loam, Clay or Sand) invluding lift up to 1.50 meter and lead upto 30 meter and including filling watering and ramming of excavated earth into the trenches or in the spacebetween thebuilding and side of foundation trenches or in the plinth and removal & disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 mtr form foundation trenches. (S.l.No.251) |
| 2 | Concrete with 40mm gauge brick ballast, fine sand of 1.25 F.M and cement in the proportion of 12:6:1 in foundation and under floors including supply of all material labours tools and plants etc required for the proper completion of the work (S.l.No273) |
| 3 | 2.5 cm (1 thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2cm.(3/4\"\") graded approved stone shingle laid in panels finished with 3mm.(1/8\") S.I.No 601(a) |
| 4 | M-20 class R.C.C work with cement approved coarse sand 20 mm gauge approved stone grit in the proportion of 1:2:4 in foundation and footing excluding the supply of rainforcement and itsbending but including its biding the same with 24 BWG, Gl binding wire and also including providing and fixing necessary centering and shuttering and its removal after completion of work & supply of all other materials labour T&P etc. Required for the proper completion of the work. (S.l.No.287) |
| 5 | Same as above in item No 3 but for Plinth band as per S.l.No 282 |
| 6 | Same as above in item No 3 but for Column as per S.l.No 288 |
| 7 | Same as above in item No 3 but for Slabs and Cantilever slabs as per S.l.No 284A |
| 8 | Mild steel of iron work in plain work such as in reinforced concreate or reinforced brick work (When not included in overall rate) wrought to required shapes as necessary andbending for the proper completion of workincluding supply of steeland its wastages and all labour and T&P required for proper completion of work note the steel shall bent cold and all bends hooks and authorised over lapping shall be measured as per s.l. No 504 |
| 9 | Class 150 sub class \"A\" brick work in 1:4 cement and finesand of 1.25 F.Mmortar in foundation and up to plinth including supply of all materials labour and T&P etc. Required for the proper completion of the work (S.l.No.305) |
| 10 | Same as above in item No 8 but in super structure for wall of one brick thickness As per S.l.No 305+309+310 |
| 11 | Same as above in item No 8 but in super structure for wall of hale brick thickness As per S.l.No 305+309+310A |
| 12 | 12 mm thick plaster with 1:4 cement and Coarse sand morter on brick work including ranking and joint washing and cleaning and including supply of allmaterials labour and T&P etc. required for proper completion of work. As per S.l.No 584(a) |
| 13 | 12 mm thick plaster with 1:4 cement and Coarse sand morter on brick work including ranking and joint washing and cleaning and including supply of allmaterials labour and T&P etc. required for proper completion of work. As per S.l.No 584(a) |
| 14 | Mild steel of iron work of spaill size and sections such as holding down bolits, hold fast. tie roads gratngs etc. (when not included in an over all rates) wrought to required from, including of supply of steel, boalts nuts and wastage etc. and there fixing required for proper completion of work. S.l.No 502B |
| 15 | Same as Iten No 15 above but for fabrication of grill as per S.l.No 502C |
| 16 | Supply and fixing of flush door commercial quality conforming to IS 2202 part 1 (1983) I/C fixing of wooden cleats and stoppers and ingcluding fixing and adjustment of hinges bolts lock handiles springs fittings with necessary screws to be supplied departmentally. (32 mm thick) |
| 17 | Same as item No 17 above but in the earth carted from 1.00 Km. distance on kachcha road. |
| 18 | Sand filling in plinth including supply necessary quantity of snad including watering and supply of all materials labour and T&P etc. required for proper completion of work. As per S.l.No 255 |
| 19 | Providing & Laying vitrified floor tiles in different size (thickness to be specified by the manufacturer) with water absorption\"s less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement, 4 Coarse sand) including grouting the joints with white cement and matching pigments etc,(Size of tile 60x60mm) complete As per D.S.R 11.41.2 |
| 20 | Supply & Fixing 6 mm (14\"\") china white glazed tiles in flooring or skirting dado laid with 1:3 cement and approved coarse sand mortar finished white cementslurry jointing and polishing complete including supply of all materials,labour and T&P etc. required for proper completion of the work.S.I.No 628 |
| 21 | Finishing wall with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials labour and T&P etc. required for proper completion of work as per S.l.No 660 & 661 |
| 22 | Painting tow coat with superior synthetic enamel paints over and including one prime coat of approved quality on new work including sand papering rubbing and cleaning the surface including supply of all materials labour and tools and plants etc. required for proper completion of work. as per S.l.No (1+2+4iii) |
| 23 | Providing & fixing fly proof wire gauge to windows clerestory windows & doors with Flat 15x3 mm and nuts & bolts complete. Galvanised M.S.Wire gauge with 0.63 mm dia wire and 1.4 mm aperture on both sides D.S.R 10.29.1 |
| 24 | WaterSupply & Sanitary Work |
| 25 | Electrical Installation Work |
| 26 | Sign Board Fixing comlete in All Respect & Photography |
AI Tender Summary
Tender Timeline
Mar 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender