}

Tender For Welcome Maintenance And Misc Br Repair Works At Rashi Area And Repair To Interlocking Paver Blocks Repair Replacement Of Gully Trap Repair To Fencing Gate Compound Wall Drain Grating At Rashi Complex Under Age Br Ii Of Ge Nw Navy Nagar, mumbai-Maharashtra

Military Engineer Services-MES has published Tender For Welcome Maintenance And Misc Br Repair Works At Rashi Area And Repair To Interlocking Paver Blocks Repair Replacement Of Gully Trap Repair To Fencing Gate Compound Wall Drain Grating At Rashi Complex Under Age Br Ii Of Ge Nw Navy Nagar. Submission Date for this Tender is 24-04-2023. Drainage Tenders in mumbai Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

37003946
Tender For Welcome Maintenance And Misc Br Repair Works At Rashi Area And Repair To Interlocking Paver Blocks Repair Replacement Of Gully Trap Repair To Fencing Gate Compound Wall Drain Grating At Rashi Complex Under Age Br Ii Of Ge Nw Navy Nagar
Open Tender
Indian
Maharashtra
mumbai
24-04-2023

Tender Details

Welcome Maintenance And Misc B / R Repair Works At Rashi Area And Repair To Interlocking Paver Blocks, Repair / Replacement Of Gully Trap, Repair To Fencing / Gate Compound Wall, Drain Grating At Rashi Complex Under Age B / R Ii Of Ge ( Nw ) Navy Nagar, Colaba, Mumbai

Key Value

Document Fees
INR 1000 /-
EMD
INR 164500.0 /-
Tender Value
Refer document

BOQ Items

Name of Work :WELCOME MAINTENANCE AND MISC B/R REPAIR WORKS AT RASHI AREA AND REPAIR TO INTERLOCKING PAVER BLOCKS, REPAIR/REPLACEMENT OF GULLY TRAP, REPAIR TO FENCING/GATE COMPOUND WALL, DRAIN GRATING AT RASHI COMPLEX UNDER AGE B/R II OF GE (NW) NAVY NAGAR, COLABA, MUMBAI
Sl. No. Item Description
1M & L Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat of white wash on walls complete all as specified and direceted.
2M & L Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat of white wash on ceiling complete all as specified and direceted.
3M & L Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat oil bound distemper on walls complete all as specified and direceted.
4M & LPreparation of old painted wooden surfacs of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
5M & L Preparation of old painted steel surfacs of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
6M & L Complete removal of existing treatment, preparing surfaces applying wall care putty of 1 mm thickness over plastered or unplastered old surfaces and applying two coats of distemper oil emulsion, white or tinted on walls incl a coat of wall care putty all as specified.
7Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete in patches all as specified and directed .
8M & L for Rendering 15mm thick in CM 1:6 in patches on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.
9M & L Rendering 5 mm thick in patches on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified.
10M & L Prepration of new plastered surfaces of walls, pillars, cornices and applying two coatS oil bound distemper over a coat of primer including prepration of surfacecomplete all as specified and direceted.
11M&L three coats white washing on new plastered surface on ceiling including prepration of surface all as specified and directed
12S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)oraluminium wire staples and removing old beading, complete all as specified and directed.
13Supply & Fixing as in repairs aluminium serrated finish 20mm dia curtain rod of approved pattern and shade with all fittings as per site requirement such as , CP screws, rovel plug, etc. complete all as specified and directed by Engr-in-charge.
14Material & Labour for docoratedpowder coated aluminium end block, rounded block & brackets fixed in repairs for curtain rod complete all as specifed and directed by Engr-in-Charge.
15S&F 3mm thick plain sheet glass ordinary quality and glazing fitted in wooden window n.exc 0.5 sqm in each pane incl wooden beading for securing glass.
16S&F 150 mm extruded aluminium handles, fabricated type anodised fixed in repairs.
17S&F 100 mm extruded aluminium handles, fabricated type anodised fixed in repairs.
18S&F 150mm aluminium anodised barrel tower bolts of extruded section fixed in repairs.
19S&F 100mm aluminium anodised barrel tower bolts of extruded section fixed in repairs.
20S&F in repairs 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy.
21S&F in repairs 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.
22S&F in repairs hasp and staple safety type,mild steel, wire type, stove enamelled blackincluding bolt to hinge plate and fixed with screws 125mm size complete all as specified and directed.
23S&F in repair 100mm size stainless steel medium weight butt hinges all as specified and directed..
24S&F in repairs 75mm stailess steel medium weight butt hinges all as specified and directed.
25S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs
26S&F in repairsink with drainage board made of stainless steel 1mm thick kitchen or laboratry with plugs, washers andwastes; including beading in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmX460mm bowl size 410mm X 330mmX160mm complete as directed.
27S&F in repair 32 mm dia PVC flexible waste pipe of suitable length for wash hand basin or urinal complete all as specified and directed
28M&L for CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead fixed in cement concrete type B 1 (1:2:4).
29S&F PTMT grating doom over Nahani trap and floor trap of 100mm Dia
30Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each .
31S & F2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
32M & L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint
33S & F mild steelhold fasts, wall ties and similar small articlesconfirming to Fe 290 Gde E-165
34M&L Providing PCC 1:3:6, type B1(20mm graded stone aggregate) for hold fasts complete all as specified.
35S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles.& rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site as per specification & direction.
36S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S.Square tube, fixing in opening as per specification & direction.
37M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium slding window 18 to 20 mm thick over 20 mmthick screed bed in cement mortar 1:3 complete all as specified.
38M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over 15 mm thick rendering in CM 1:3 complete all as specified and directed.
39S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note:Minimum 25 micron anodisation for all aluminium sections)
40S&F 4mm thick frosted sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.
41M&L aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (80 x 66mm aperture) all complete.
42Taking down shutters of any description n exc 1 sqm each.
43All as per Item No 42 above but exc 2 sqm
44S&F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed
45S&F factory made shutter 30 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed
46S&F 35 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed
47S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)oraluminium wire staples and removing old beading, complete all as specified and directed.
48S&F 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.
49S & F 25mm thick block board, grade-1 quality exterior grade commercial type fixed with screws to timber frame work of width n.exc. 25 cm in shelves or built-in cupbords, almirahs and similar work with lipping patti all complet as directed by EIC.
50S&F 100 mm extruded aluminium handles, fabricated type anodised
51S&F 100mm aluminium anodised barrel tower bolts of extruded section
52S&F 75mm stailess steel medium weight butt hinges all as specified and directed.
53S&F 150 mm extruded aluminium handles, fabricated type anodised
54S&F 150mm aluminium anodised barrel tower bolts of extruded section
55S&F 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy.
56S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.
57S&F hasp and staple safety type,mild steel, wire type, stove enamelled blackincluding bolt to hinge plate and fixed with screws 125mm size complete all as specified and directed.
58S&F 100mm size stainless steel medium weight butt hinges all as specified and directed.
59M&L for two coat synthetic enamel paint over a coat red pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including preparation of surface complete all as specified and directed
60M&L Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
61M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.
62Demolition of cementconcrete (unrinforced) of any description and in any position not otherwise specifically provided for including chaina mozaic, WC etc.
63Treatment of sunken floor slab compraises of the following specifications and all as specified :-
64(i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely.40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate mixed with integral water proofing compound @ 3% by wt of cement consumed.as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost cutting holes and pipes shall be measured and paid separately)
65(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed.Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately)
66(iii)All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty.
67(iv)After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.
68(v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height.The thickness of two layer shall be 1mm.When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.
69(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer"s specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately)
70(vii)Allpipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (Black Japan pipes shall be paid separetely).
71M & L Cutting holes in bricks or RCC walls exce half brick built in cement mortar including making good after inserting and setting spouts all as specified.
72S & F GI pipe 50mm dia medium grade laid on sunken floor complete all as specified and direced by EIC.
73M&L for filling with PCC 1:5:10type E2 (1 Cement : 5 coarse sand : 10 graded aggregate 40 mm nominal size) as specified.
74S&F in repair PVCvalveless, syphonic action type, flushing cristern, 10 ltr capacity low level, white, with inlet, ball valve, float and handle including brackets
75S & Fin repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size(flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand.
76M & L Coloured glazed ceramic tiles300 x 200 x7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment over 12mm thick rendering as in backing coat in CM 1:4 all as specified and as directed.
77Material and labour for non-skid coloured Ceramic tiles 400x400x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
78Demoliton of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge
79Demoliton of brick or stone boulder masonry, built in cement mortar includingall as specified and as directed by Engineer-in-Charge
80Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar
81M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed
82M & L Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed
83M & L Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 grade complete all as specified and directed
84M&L Sand filling under floors or in foundations including watering and consolidation
85M & L Precast chequered cement concrete tiles 30cm x 30cm x 22 to 25 mm thick with grey cement and pigment set, jointedin neat cement slurry and pointed in coloured pigment to match the surface including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed
86M&L forplain cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as coping,road side interlocking ,stops including necessary formwork complete all as specified and directed.
87M&L broken stone or boulders of hard core n exc 63 mm deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.
88M/L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded stone aggegate as in sub base complete all as specified and directed
89M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor, finished the surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expandedmetal whilst the concrete is green all as directed .
90Material and labour, forming construction joints of width 10mm & depth 25mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.
91Material and labour, forming contraction joints (dummy joints) of width 10mm & depth 65mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.
92Dismantiling of Asbestos cement (Corrugated, semicorrugated, etc.)sheets in roof coveringcomplete all as specified and directed.
93S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.
94Dismantling mild steelwork as in angles, tubular ,brackets of vally gutter of any description and in any position.
95M&L and fabrication of mild steel work Fe-290 (Gde E-165 as in posts, purlins, rane gantires, rafter ,rails,wind tie nut & bolt etc and fasteningsetc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc complete all as specified and directed .
96S & F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe-290, Gde E-165
97M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.
98M & L Brick work built in cement mortar 1:4 using old size sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed
99M & L 15mm thick rendering in cement mortar(1:4) on fair face of brick work or concrte surfaces finished surface even and smooth with using extra cement complete all as specified and as directed by EIC.
100M&L for 20 mm thick plasteringin two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cementand using welded mesh where required all as specified including chicken wire mess and scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- WPC to be mixed in setting coat only and WPCand welded mesh shall be measured and paid separately) ( Note : Chicken wire mess rate including )
101Supply only integral water proofing compound of approved ISI make.
102Dismantling of fencing wire mesh any type
103Dismantling posts or struts (wood,steel or RCC) any section,in natural ground including taking out embedded portion and making good distrubed ground complete all as specified and directed
104Excavation in post holes in soft loose soil (or similar holes ) each n.exc 0.50 cum,getting out,returning,filling in and ramming earth or broken rubble and removing surplus soil all as specified and directed
105M & L Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundationfilling mass concrete all as specified and directed
106S&F mild steel work as in angle iron post and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc flat iron fillets ( for securing wire mesh etc) including all necessary drilling,bolting or riveting and welding to existing boundary wall fencing post and other similar location etc complete all as specified and directed
107Supply onlyhot dipped galvanised mild steel PVC Coated chain link of Size 75mmx75mm, made of 4.0mm dia GI wire, including line wires, or any other approved mesh of any size and dia of GI wire complete all as specified and directed.
108Fixing only hot dipped galvanised PVC Coated chain link fencing including line wires,any mesh size and type to any type of standards,rails,straining bolts etc including provision of binding wireall as specified and directed
109Removing demolished materials outside MD land to a distance exc 5Km but n exc 20Km.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail