Bharat Sanchar Nigam Limited-BSNL has published Tender For Repairing Of Ei And Fans And Replacement Of Faulty /Damaged Fluorescent Tubes/ Fittings By Energy Efficient Led Tubes / Fittings And Replacement Of Compound And Gate Light Fittings Etc. For Telephone Exchange Phulbani, Phulbani Store, Jahn. Submission Date for this Tender is 31-03-2023. Electrical Maintenance Tenders in phulbani Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Inspection, checking and testing of the internal electrical installations i.e. electrical fittings, fans, wirings, panels, MCBDBS, electrical distribution system, identifying the faulty cables, interconnections, fittings, fans and its accessories i/c arranging all measuring instruments, tools and tackles required to carry out the fault rectification and repairing works at Telephone Exchange Buildings under BSNL Phulbani SSA etc.complete as required. |
2 | Replacement of the faulty and burnt out MCBs, Isolators etc. by new ones of following ratings MCBs and Isolators ISI marked as per IEC 60947-3 /MCBs 10 kA, C- Curve as per IEC 60947-2 in existing MCBDBs i/c connection testing etc. as required. (Make-Legrand / L&T / Schneider Electric / Siemens/Havells ) |
3 | 63Amps 4 pole isolator |
4 | 6-32A SPMCB |
5 | Replacement of the following burnt out/damaged cable/wires/lugs/sockets etc. by new one of following types, sizes and ratings PVC insulated FRLS copper conductor single core stranded flexible cable i/c laying / drawing in existing conduit/pipe, connection, testing etc. as required. |
6 | 1.5sqmm |
7 | Supply of the following electrical accessories/components for Electrical Light Fittings i/c testing etc. as required. |
8 | 36 /40-watt 4ft Fluorescent Tube rods (T8) |
9 | 36/40-watt electronic ballast for Fl. Tube fittings |
10 | Starter for Fl. Fittings |
11 | 20-watt 6000K + 5%, energy efficiency 4ft (T8), Luminous efficiency - 100lm/watt, CRI >80, cool day light LED retrofit Tube rods having integrated Driver and glass body suitable for operation on 85-285V AC supply etc. as required. (Make: Havells / Phillips/Crompton/Bajaj) |
12 | Replacement of the lamp/starter holders/ceiling roses/ plug tops/stud connectors etc. by new ones of reputed makes etc. as required. |
13 | Angle / Batten/ Pendant Holder |
14 | 36/40 W Fl Tube light holder |
15 | Ceiling Rose |
16 | Replacement of the defective switches/sockets/lamp holders/ call Bells etc. by the new one of following ratings etc. as required. (Make- Anchor/Havells/Cona/ISI) |
17 | 6 Amps 1 way piano type switch |
18 | 6Amps 3 pin piano type socket |
19 | Carry out repairing of Electrical Light Fittings by arranging qualified and trained man power and tools, tackles, ladders etc. i/c dismantling of defective/faulty components and fixing of new components i.e chokes, lamps, starters, interconnection wires, lamp holders etc. as required |
20 | Relaying of following size Al. conductor armoured cable on surface of wall with GI saddles etc. as required. |
21 | 2X6sqmm |
22 | Replacement of the defective Capacitors / Fan regulators/ bearings for ceiling fans etc. by the new one of following ratings etc. as required. (Make- Anchor/Havells/Cona/ISI) |
23 | 2.25 mfd 440 volts Capacitor for Ceiling Fan |
24 | Supply and fixing of 1400mm sweep superior quality Ceiling fan suitable for operation on 230 volts 50Hz, AC supply, connection, testing etc. complete as required. (Make- Bajaj Bahar /Havells: Pacer / Usha Striker/Crompton Greaves/Equivalent) |
25 | Replacement of the faulty and damaged exhaust fans by new heavy duty Exhaust fan of 1400 RPM with a capacitor start and run type, continuously rated, totally enclosed and ruggedly built motor having pre-lubricated double ball bearing with Class "A" and "E" insulation with all accessories (Excluding Louver shutter) suitable for operation on 230 volts single phase 50 HZ AC supply with features for smooth & silent operation to deliver the maximum output at lower operating cost. The impeller of the Exhaust Fan is to be propeller type and both hub and impeller are to be dynamically balances and frames and arms mounted on rubber bushing so that, vibration are virtually eliminated. (Make- Almonard HD (ISI) / Crompton Greaves /Bajaj or similar superior) (Excluding installation) |
26 | 380mm /15"1400 RPM. |
27 | Installation of exhaust fan up to 450mm sweep in the existing opening with fastener/ GI nuts and bolts, including making good the damage, connection, testing, commissioning etc. as required |
28 | Supplying and installation of gravity type Aluminum/ GI louver shutters suitable for 300-450mm sweep exhaust fans with fastener /GI nuts and bolts etc. complete as required. |
29 | Supply and fixing of following watt new generation energy saving and environmentally friendly long life LED street light made up of pressure die cast aluminium housing with highly efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 along with fixing bracket made of 32/40mm dia medium class GI pipe with clamps i/c connection, testing etc. as required. (Make:Havells / Phillips/Crompton/Bajaj) |
30 | 30 watts |
31 | 45 watts |
32 | Supply and fixing of SMC Junction box of size 200mm x 140mm x 95mm (inside dimensions) with hinged door type including supply and fixing of 1no. 4 pole stud connectors with nuts and bolts etc. as required. (Sintex GSJB2014/SS) |
33 | S/F of 400 mm sweep wall mounting fan suitable for operation on 240-volt 50 Hz AC supply including connections etc. as reqd. (M/S Crompton/ Usha/ Havells) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail