Orissa Lift Irrigation Corporation Limited has published Tender For Installation And Energisation Of Bhatpali-Iii R.L.Project With Supply Of All Materials On Turnkey Basis Under Livelihood Package For Lsip. Submission Date for this Tender is 05-04-2023. Lift Irrigation Tenders in bolangir Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. |
| 2 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. |
| 3 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. |
| 4 | Cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 5 | Brick work with fly ashBrick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-in charge. |
| 6 | Brick work with fly ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) insuper structureetc. complete as per the Engineer-incharge. |
| 7 | Cement concrete (1:2:4) with 12mm size black C.B. hand broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge. |
| 8 | Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge. (Plinth Bend of Pump Chamber, Distribution Tank, Protection Tanks etc |
| 9 | Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.b) Column |
| 10 | Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge. C) Lintel |
| 11 | Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.d) Chhaja/ RS |
| 12 | Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Steel Bar (FE 415/ FE 500) |
| 13 | R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 14 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 15 | 20mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 16 | Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 17 | Providing & fixing of retro relectorised signboard made of high intensity grade sheeting fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75mm x 7mm ( 80cm x 60cm) size rectangular shape. |
| 18 | Providing & fixing of retro relectorised signboard made of high intensity grade sheeting fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75mm x 7mm ( 90cm x 150cm) size rectangular shape. |
| 19 | Distempering 2 coat over a coat of white washing with approve good stone lime and colouring material includingcost conveyance charges of materials includng supply of labour, gum,indigo etc. requiredfor the work complete as directed by the engineer in charge. |
| 20 | M.S. pannel door single leafed with M.S. frame overall size includingframe of height (1.2 x2.0)mt. widthfor door and shutter of 18 gauge CR sheet pannel as per approved size & specification etc. complete including cost of all materials fitting and fixing the door etc. complete as per the direction of the Engineer in charge. |
| 21 | M.S. pannel window single leafed with M.S. frame overall size includingframe of height (0.9 x2.0)mt. width of 18 gauge CR sheet pannel as per approved size & specification etc. complete including cost of all materials fitting and fixing etc. complete as per the direction of the Engineer in charge. |
| 22 | Suplying fitting and fixing of sky light of approved quality of size 0.60 mtr. X 0.38 mtr. Made ofcement concrete as per the direction of the Engineer in charge. |
| 23 | 25mm thick A.S. flooring with C.C. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve querry including water and curring with cost taxes royalty and conveyance charges of all material toworksite and supply of all labour and T&P required for the work complete as directed by the Engineer in charge. |
| 24 | Pump chamber wiring with plug and light arrengment |
| 25 | Painting two coat with an approveprimer over iron work including cost of labour etc. complete as per direction of the Engineer in charge. |
| 26 | Supply of un plasticised all dia meter diaPVC Pipe for all classes including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. including cost of PVC Pipe, cost of Solvent Cement, Transportation of Pipe complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge.a) 160mm dia PVC Class-I Pipe |
| 27 | Fitting of un plasticised all dia meter diaPVC Pipe for all classes including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. including cost of PVC Pipe, cost of Solvent Cement, Transportation of Pipe complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge.a) 160mm dia PVC Class-II Pipe |
| 28 | Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. |
| 29 | Fitting of un plasticised 200mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from factory to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. |
| 30 | 12.5/15.00 HP Centrifugal Monoblockpumpset 24mtr. Head to discharge 0.0283 Cumec (Powder coated) |
| 31 | Control Panel Board with 12.5 /15.00 HP Starter, Capacitor including internal wiring with MCB, Indicator lamp & Volt meter, Ameter etc. |
| 32 | Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red oxide primer and two coats of smoke gray / navey blue enamel n both side (inside & outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board. |
| 33 | Base frame for panel (size 0.40mx0.20m) made with 3" size M.S. channel having suitable holes for fitting of panel Board, coloured with one coat of red oxide primer and two coats of smokes grey enamel paint & Base frame for motor (size 0.50mx0.27m) made with 3" size M.S. channel having suitable holes for fittings of different size and make 3 phase centrifugal monoblock pump set from 10 H.P. to 15 H.P. coloured with one coat of red oxide primer & two coats of smoke grey enamel paint. |
| 34 | Cost of Labour charges for instalation of Pump Set, Suction, Delivery Pipe, G.I. Pipe, G.I. Fittings, Base Plate including cost of required Nut Bolt, Rubber Packing, Cutting & Threading of G.I. Pipe Welding, Fitting of Butterfly Valveand for Priming arrangement etc.complete. |
| 35 | 3 x 16 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. |
| 36 | 100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark. |
| 37 | 100 mm Ø C.I. Foot Valve should be of swing type friction less with single disc confirming to IS – 4038/1979 of reputed brand |
| 38 | 100 mm dia G.I. flange IS No.6392 / 1971 |
| 39 | 100 mm dia G.I. bend IS No.1239(Part-II/1992) |
| 40 | 100mm Non-return valve C I double flanged swing type PN - 1.0 as per IS:5312 part-I with by-pass arrangement |
| 41 | 50 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark. |
| 42 | 100x100x50mm G.I. priming Tee |
| 43 | 200 mm M.S. pipes with plain ends in random length of 4 to 7 mtrs. Confirming to BIS 3589 with minimum wall thickness of pipes should be 5.5 mm each pipe should bear ISI specification and manufacturers name / Trade mark. Steel grade of the pipe should be Fe330 |
| 44 | 200 mmx100 mm G.I./M.S. Reducer |
| 45 | 200 MM x 200 MM X 160 MM dia pvc Teewith all fittings |
| 46 | 160 mm x 160 mm x100 mm Ø M.S.Raiser Tee set with bend , closing and opening arrangement. |
| 47 | Cost ofButterfly Valve with all fittings |
| 48 | 200 mm Ø PVC End Cap (W.P. 6 kgf/cm2) confirming to IS-4995/1988 with latest ammendment |
| 49 | 160 mm Ø PVC End Cap (W.P. 6 kgf/cm2) confirming to IS-4995/1988 with latest ammendment |
| 50 | 160x160x160 mm dia PVC equal Tee |
| 51 | 200 mm Ø PVC Bend (90° W.P. 10 kgf/cm2) confirming to IS-4995/1988 with latest ammendment |
| 52 | 200 mm Ø PVC coupler (4 kg/cm2) Agricultural PVC fittings confirming to IS-4995/1988 with latest ammendment |
| 53 | 160mm PVC Coupler |
| 54 | Supply of solvent cement of approve quality for joiniting of PVC Pipe with all cost and all tax etc. complete as per the direction of the Engineer-incharge. |
| 55 | Rough stone dry packing in appron & revetment with HG Stone 15 cm to 30 cm. |
| 56 | Construction of 3 phase 11 KV line as per REC standard confirming to RE Rules 1956 with 9 M long PSC Pole support in 60 M span,with 55 Sqmm AAAC , 11 KV "V" Cross arm , with required No.of 11 KV T & C Disc.Insulators & 11 KV Pin Insulators, Carping & Padding of Poles, Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & Double Stay at end point with 18 mm G.I. H.T Stay , concreting of Stay with Anchor plate, guarding at Road crossings etc. Marking OLIC in every PSC pole in enamel paint including cost of all materials, labour ,transpotation,inspection & commissioning etc.complete as per direction of Junior Engineer, Electrical in charge . |
| 57 | Installation of 25 KVA,11/.4 KV Pole mounted Sub-Station using 9 Mtr long PSC pole with Stare Ratted Transformer as per the specification & estimate of DISCOM including barbed wire fencing. |
| 58 | L.T.Line 3ph 4w using 3x35+1x25sq.mm AB Cable & 9 mtr long PSC poles with fittings with all materials required for the same as per the specification & estimate of DISCOM including barbed wire fencing. |
| 59 | Electrical installation with electrical materials such as PVC tape, ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, G.I. flexible conduite pipe, No.6 G.I. wire, copper cable socket, G.I. socket and flange and petty materials required for electrical installation. All materials should be as per IS. |
| 60 | Earthing installation with required earthing materials like charcoal, common salt, conduit pipe, soft solder alcaps ,nuts & bolts, cable socket etc. including excavation of earth pits 2 Nos of size 1200mm X1200mm X 3200mm for fixing of earthing pipe 2 Nos of size 40mm dia X 3000 mm length with required slotting in pipes & fittings with 40 mm dia G.I.Flange etc. includidng excavation of earthing trench for laying of earthing G.I.Wire & filling the Trench Pits after fixing of pipes on completion on earthing work and pannel wiring with required 4mm2/2.5mm2 PVC coper wire including supply & transportation of materials to work site as per the direction of site Engineer in-charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
