Public Works Department-PWD has published Tender For Eor To Residential Complex, Central Jail, Tihar, New Delhi. Sh Providing Tank Platform For Pvc Tank Instead Of Rcc Tank In Type-Ii And Iii Qtrs.. Submission Date for this Tender is 03-04-2023. PVC Tank Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls |
2 | Under 20 cm wide |
3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
4 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
5 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
7 | Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battensor structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : Red sand stone slab |
8 | 40 to 50 mm thick |
9 | 12 mm cement plaster of mix : |
10 | 1:4 (1 cement: 4 coarse sand) |
11 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
12 | 1:4 (1 cement: 4 coarse sand) |
13 | 6 mm cement plaster of mix : |
14 | 1:3 (1 cement : 3 fine sand) |
15 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
16 | Two or more coats on new work |
17 | Finishing walls with water proofing cement paint of required shade : |
18 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. |
19 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
20 | 15 mm to 40 mm nominal bore |
21 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
22 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
23 | 15 mm dia nominal bore |
24 | 20 mm dia nominal bore |
25 | 25 mm dia nominal bore |
26 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
27 | 25 mm nominal bore |
28 | 20 mm nominal bore |
29 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
30 | 15 mm diameter pipe |
31 | 20 mm diameter pipe |
32 | 25 mm diameter pipe |
33 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
34 | 15 mm nominal bore |
35 | 20 mm nominal bore |
36 | 25 mm nominal bore |
37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
38 | Grading roof for water proofing treatment with |
39 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
40 | Add Cost Index @ 34.95% on DSR Items i.e.Rs.2011181/- |
41 | Less @ 9.5% on DSR Items i.e.Rs.2714089/- |
42 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) : 15mm nominal bore |
43 | Providing and fixing G.I. Tank Nipple in PVC Tank as directed by Engineer-in-charge. |
44 | 15mm nominal bore. |
45 | 20mm nominal bore. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail