Public Works Department-PWD has published Tender For Repair Maintenance Operation Electrical Installation And Fans Pump Sets Street Light Fire Fighting Dg Set Sub Station Pa System Lifts In Pwd Colony Sector Iii Dwarka New Delhi Sh Routine Operation And Maintenance Of E And M Services Including O. Submission Date for this Tender is 01-04-2023. Passenger Lift Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | SH- I-(A- Maintenance & Operation of EI & Fans) |
2 | Maintenance & operation of various E&M services of GNCTD staff qtrs Dwarka comprising of following services on all days of the month i/c Sunday and Holidays i/c attending day to day complaint, rectification of fault, up-keeping and preventive maintenance of all electricals & mechanical installation complete etc as reqd. as per terms & conditions. The firm shall depute their trained supervisor/Engineer at the site for all the below services and for duty chart of the deployed staff. |
3 | (i) Internal and External electical installations i/c compound lighting i/c DG Set with AMF Panel & L.T. Panel :- (a) Wireman - 3 Nos. (One No. in each shift) (b) Khallasi - 2 Nos. One no. in each shift 6 AM to 2 PM & 2 PM to 10 PM |
4 | B - Misc. Works |
5 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
6 | Group C |
7 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling and credit of old material etc completeas required |
8 | Group C |
9 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. |
10 | 3 x 1.5 sq. mm |
11 | 3 x 4 sq. mm |
12 | 3 x 6 sq. mm |
13 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
14 | 20 mm |
15 | 25 mm |
16 | 32 mm |
17 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. |
18 | 3 Module (100mm X 75mm) |
19 | 6 Module (200mm X 75mm) |
20 | 8 Module (125mm X 125mm) |
21 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without CB/RCCB/Isolator) |
22 | 8 way , Double door |
23 | 12 way , Double door |
24 | Supplying and fixing followingrating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
25 | Single pole - 5 to 32 Amp |
26 | Double pole - 63 Amp |
27 | Providing and fixing following rating and breaking capacityand pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections i/c credit of old material i/c retrofittings of MCCB in the existing cubical paneletc. as required. |
28 | 100 Amp, 16 KA,TPMCCB |
29 | 125 Amp, 16 KA,TPMCCB |
30 | 100 Amp, 25 KA, FPMCCB |
31 | 125 Amp, 36KA, FPMCCB |
32 | Providing laying, testing & commissioning of "C" class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground / RCC including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. |
33 | 150 mm. Dia |
34 | Supplying installation, testing & commissioning of LED post top fitting of having minimum system lumens 4000 & system efficacy 100 lumens/watt, THD =10%, Power Factor=0.95, CRI=80, IP 66 made out of high pressure die cast aluminium housing with pre-wired gear tray with LEDs and driver, supply directly i/c connections with 1.5 sqmm., PVC insulated, FRLS copper conductor, single core cable on the existing pole complete with making suitable arrangement to fix on the existing pole using reducer/ enlarger if required, testing and commissioning etc. as required. |
35 | Supplying, installation, testing & commissioning of following wattage street light LED fittings having minimum system lumens output should more than8640 & system efficacy =120 lumens/watt, IP66 protected, body made out of pressure die cast aluminium for better thermal management, power factor=0.95, THD=10%, CRI=70% & CCT 4000-6500 °Ki/c fixing on existing pole / bracket making connection etc complete as required. |
36 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required |
37 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
38 | Supplying and Laying of one number PVC insulated and PVC sheathed Aluminium conductor XLPE armoured power cable of 1.1 KV grade of following size direct in existing DWC/ Hume Pipe complete etc. as required. |
39 | 4 x 10 sqmm (In ground) |
40 | 4 x 25 sqmm (In ground) |
41 | Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required. |
42 | Supplying and Laying of following size one number PVC insulated and PVC sheathed / XLPE power aluminium conductor armoured cable of 1.1 KV grade on surface of wall etc. as reqd. |
43 | 4 x 25 Sq.mm |
44 | Supplying installation, testing & commissioning of LED post top fitting of having minimum system lumens 2500 & system efficacy 100 lumens/watt, THD =10%, Power Factor=0.95, CRI=80, IP 66 made out of high pressure die cast aluminium housing with pre-wired gear tray with LEDs and driver, supply directly i/c connections with 1.5 sqmm., PVC insulated, FRLS copper conductor, single core cable on the existing pole complete with making suitable arrangement to fix on the existing pole using reducer/ enlarger if required, testing and commissioning etc. as required. |
45 | Providing, laying, testing & commissioning of "C" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
46 | (c) 150 mm dia |
47 | Supply and Fixing of Pole Mounted Junction Box made up of SMC material , size 370X270X210 mm mmhaving din bar/rail , connectors, 10A c curve mcb including suitable connection ofcable/wire in boxetc as required. |
48 | Brush/spray Painting of poles (8-10 mtr approx.) with aluminium glossy enamel paint including scrapping old paint, providing two layer of red oxide paint and then coating with two layer of enamel paint complete as required. Hiring of tower wagon numbering of pole and name of department. |
49 | Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20 mm) of specified size and shape including form work, plastering if required, curing etc. as required. (volume of pole/ pipe not to be deducted) |
50 | SITC of electric driven 15 HPmonoblock typepump Set TEFC type suitablefor operation on 415 volts, 3 phase 50 Hz AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class - "F" insulation conforming to IS-325 withcentrifugal pump of cast iron body, bronze impeller with stainless steel shaft, mechanical seal and flow rate 1194 to 732 LPM at 22 to 52 mtr.head suction /deleivery of 85x65 mm confirming to IS 1520, M.S. fabricatedbase plate, foundation bolts with anti vibration pads, etc. as reqd. |
51 | Fabrication, supplying and fixing of indoor cubical type panel board, dust, damp and vermin proof, compartmentalized, free floor standing, made out of 2.0 mm thick CRCA sheet minimum 30 cm deep (NS) duly powder coated & painted (CPRI approved) complete with 4 strips alu. bus bar of 400 amps.capacity complete with solid connection, interconnections, internal wiring with copper conductor cable of suitable sizes, earthing, sellector switch for auto mannual on/off i/c testing & commissioning etc. as reqd. |
52 | Supplying and fixing following accessories in the existing cubical type control panel for pump room etc. as reqd. |
53 | Star delta meter starter for monoblock pump set including OverloadProtection ,Single Phasing Protection ,Phase Reversal Protection , Phase Unbalance Protection , Ruggedcontactor with moulded coil , Auto Restart (with variable 30 Sec – 5 Min ON delay), Power ON & Pump OFF indication, Dual Voltmeter & Ammeter - 5 No.s |
54 | VAF+PF Meter CLASS 1 Accuracy - 01 Nos |
55 | CT 300/5 Amp burden 10 VA Accuracy class 1 - 3 Nos. |
56 | phase indicatin lamp (RYB)-01 No.s |
57 | 4 pole MCCB, 200A, 36kA - 01 No.s |
58 | 32 A ratings, DP MCB, “C” curve, 10 kA breaking capacity - Nos. |
59 | Fabrication, supplying and fixing of indoor cubical type panel board, dust, damp and vermin proof, compartmentalized, free floor standing, made out of 2.0 mm thick CRCA sheet minimum 40 cm deep (NS) duly powder coated & painted (CPRI approved) complete with 4 strips alu. bus bar of 800 amps.capacity complete with solid connection, interconnections, internal wiring with copper conductor cable of suitable sizes, earthing, sellector switch for auto mannual on/off i/c testing & commissioning etc. as reqd. |
60 | Supplying and fixing following accessories in the existing cubical type L.T. Panel in substation etc. as reqd. |
61 | 4 pole MCCB,630A, 50kA - 02No.s |
62 | 4 pole MCCB,250A, 36kA-01 Nos |
63 | VAF+PF Meter CLASS 1 Accuracy - 01 No. |
64 | CT 1000/5 Amp burden 15 VA Accuracy class 1 - 3 Nos. |
65 | phase indicatin lamp (RYB) - 01 No. |
66 | 32 A ratings, DP MCB, “C” curve, 10 kA breaking capacity - 1 Nos. |
67 | C - Supply of material |
68 | Following material shall be supply by agency and existing man power shall be used for replacement on day to day maitenance works. |
69 | S.P. 5/6 A, one way switch, piano type ISI marked |
70 | S.P. 5/6 A, two way switch, piano type ISI marked |
71 | S.P. 15/16 A, one way switch, piano type ISI marked |
72 | 3 pin 5/6 A socket outlet, piano type ISI marked |
73 | 6 pin 15/16 & 5/6 A socket outlet, piano type ISI marked |
74 | Bell push, piano type |
75 | Brass pendant holder |
76 | 5 AmpModular Switch |
77 | 5 AmpModular Socket |
78 | 15/16 AmpModular Switch |
79 | 15/16 AmpModular Socket |
80 | 6 to 32 Amp SP MCB |
81 | 40 Amp DP MCB |
82 | 63 Amp DP MCB |
83 | 63 amp TPN MCB |
84 | 1.5 Sq.mm FRLSCuwire |
85 | 4Sq.mm FRLS Cuwire |
86 | 6Sq.mm FRLSCu wire |
87 | 2.50 mF capacitor |
88 | 1200 mm ceiling fan (White) |
89 | Heavy Duty Exhaust Fan 300 mm Sweep (900 RPM) |
90 | Exhaust fan 380 mm sweep (1400 r.p.m) |
91 | 450 mm sweep heavy duty exhaust fans |
92 | 250 mm Air freshner /Ventilator fan |
93 | 20-22 wattsurface mounted self Ballasted LED Batten with Aluminium body with opaldiffuser having 100 lumens/watt and colour temperture of 5500-6500 kelvin and CRI of >80 andhaving power factor of >0.95, etc. Complete as reqd. |
94 | 9-12 wattsurface type self Ballasted round LED downlighter with Glare free opaldiffuser having 100 lumens/watt and colour temperture of 5500-6500 kelvin and CRI of >80 andhaving power factor of >0.95, I.P. 20 Protectionetc. complete as reqd. |
95 | 7-9 watt recess type self Ballasted round LED downlight for lift with Glare free opaldiffuser having 100 lumens/watt and colour temperture of 5500-6500 kelvin and CRI of >80 andhaving power factor of >0.95, I.P. 20 Protectionetc. complete as reqd. |
96 | 200 Watt flood light LED fittings on Parapet of building with energy efficient, IP66 protected, body made out of pressure die cast aluminium for better thermal management,power factor>0.95, THD<10%, CRI>70%, system efficacy =120 Lm/W & CCT 5700-6500 °Ki/c makingconnection etc complete as required. |
97 | Call bell/ buzzer, single phase |
98 | 16 Amp. Modular Switch socket combined PVC Box |
99 | Ceiling rose, 3 pin, 5 A ISI marked |
100 | 3 mm thick phenolic laminated sheet |
101 | D-Credit of old dismanteled material |
102 | 1.5 / 4 / 6 Sq.mm FRLSCuwire |
103 | 5 / 15 Amp. Switch Sockets & Fan regulator |
104 | SPMCB |
105 | DP MCB |
106 | 63 Amp. TPN |
107 | Exhaust fan 380/450 |
108 | ventilationfan - 250 mm & 150 mm |
109 | 20-22 wattsurface mounted self Ballasted LED Batten |
110 | 9-12 wattsurface type self Ballasted round LED downlighter |
111 | 7-9 watt recess type self Ballasted round LED downlight |
112 | 200 Watt flood light LED fittings |
113 | SH- II-(Maintenance & Operation of FF, FA & PA system) |
114 | Fire Fighting System, Fire Alarm System and PA system- i/c Fire Pumps, Fire Engine etc.(i)Fire fighting system, Fire alarm system and PA system (Round the clock) (a) Fire Operator - 3 Nos. (One No. in each shift) (b) Khallasi - 2 Nos. (One No. in general Shift 9 AM to 5 PM- + 1 No. 10 PM to 6 A |
115 | Sub Head - III (Operation of Lifts) |
116 | Operation of 12 nos. passanger lift (2 nos. in each block) i/c cleaning, sweeping of lift car at PWD colony, Sector-III, Dwarka comprising of following services on all days of the month i/c Sundays and holidays as per terms & conditions enclosed :- (a) Lift Operatpor - 4 Nos. (Two nos. in each shift) (6 AM to 2 PM & 2 PM to 10 PM) (b) Lift Operator - 2 Nos. (Night shift 10 PM to 6 AM) |
117 | Sub Head - IV (Comprehensive maintenance of DG set) |
118 | Comprehensive maintrenance of following silent type DG sets installed at GNCTD Staff Qtrs. at Sector-3, Dwatrka, complete with AMF panel, diesel tank, fuel pump and other associated accessories etc. i/c carrying out preventive / periodic maintenane and servicing (with 2 Nos. B ckeck kit for each DG set i/c Mobile oil, Air, fuel, oil filters, coolant, descalant, gasket, rocker lever cover etc) attending all major / minor faults and / or failure etc. complete as reqd. as per the terms and conditions attached. 320 KVA DG set Cumins :- 1 No. Model No. - NTA-855-G2 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail