Board Of Radiation And Isotope Technology-BRIT has published Tender For Augmentation And Revamping Of General Utilities. Submission Date for this Tender is 21-04-2023. Civil Work Tenders in Thane Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking out doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m leadFor thickness of tiles above 10 mm and up to 25 mm |
| 3 | Dismantling old plaster / skirting carefully ,raking out joints and cleaning the surface for plaster includingdisposal of rubbish to the dumping ground within 100 m lead |
| 4 | Providing 15 mm thick Internalplaster in cement mortar 1:4 without cement punning (usingCrushed Sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curingall as per specifications, drawings and as directed at site complete. |
| 5 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade andcolour of size ranging from300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mmas approved byEngineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints withmatching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. |
| 6 | Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and300 - 600 mm wide andthickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved byEngineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge |
| 7 | Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 mm C.P. brass pillar tap of approved make,15 mm x 600mm longPVC Inlet connection,32 mm heavy quality C.P. brass waste couplingof standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge. (7.1) White vitreous Chinacounter top / counter below wash basin size 560 x 410 mm /560 x 450 mm with single 15 mm C.P. brass pillar tap (OVAL / ROUND Models) |
| 8 | Providing and fixing white vitreous china European type Wall Mounted, Hindware Wall Mounted EWC - Pastle Colour - Constellation Model With Seat coverWater Closetwith "P" or "S" Trapwith solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231,flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc.complete all as per drawings and specifications and as directed by the Engineer-in-charge.(8.1) E.W.C. pan in White colourwith ISI marked white solid plastic seat and lid. |
| 9 | Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x350 mm / 610 mm Aquaseal modelofapproved makewith approved make 32mm C.P flush value with standard flush pipe and C.P. brass spreaders, 32mm urinal waste coupling with dome grating and clamp etc. including making G.I water line connection complete as directed by the Engineer-in-charge (Only G.I. pipes will be paid under relevant Item ) (9.1)Single half stall urinal with C.P brass Flush valve. Note : For fixing flush valve 32 mm G.I water line provision to be made which will be paid under relevant Item . |
| 10 | Providing and fixing 6 mm thick mirrors of size600 x 450 mm of approved make with bevelled edges complete with 6 mm thickasbestos sheet back ground fixed to wallswith C.P. brass screws and concealedwashers complete. all as per specifications and as directed by the Engineer-in-charge . |
| 11 | Providing and fixingFRPdoor shuttersflush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foamand fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws, (11.1) 35 mm thick panelleddoor type of approved coloursincluding the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws. |
| 12 | Providing and fixing aluminium aldropsof size 250 X 16 mm ISI marked anodised transparent or dyed to requried colour or shade with necessary screws, bolting from rear side complete as per specifications and as directed by the Engineer-in-charge |
| 13 | Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI markedof approved make, transparent or dyed to requried colour or shade with necessary screws etc. |
| 14 | Providing and fixing aluminium handles175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete. |
| 15 | Providing and fixing C.P brass 2 way Angle cock (2 Angle cock combinationin single fitting) of heavy quality of approved make as per specifications and as directed by the Engineer-in-charge. |
| 16 | Providing and fixing C.P brass bib cock of heavy quality of specified / approved makeas per specifications and as directed by the Engineer-in-charge, (16.1) 15 mm diabib cock of approved type and make . |
| 17 | Providing and fixing Heavy Quality 15 mm C.P brassswan neckpillarcockof approvedmakeas per specifications and as directed by the Engineer-in-charge. |
| 18 | Providing and fixing minimum 17 mm thick gang saw cut mirror polished granite (premoulded and prepolished) machine cut ZEBRA BLACK colour granite for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edge to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels |
| 19 | Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawingsbut excluding the cost of Formworkshuttering, centering and steel reinforcement at all Levels |
| 20 | Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge, (20.1) 20 mm n.b |
| 21 | Providing and fixing15mm OD SDR 11 CPVC pipepipes having thermal stability for hot and cold water supply including all CPVC plain & Brass threaded fittings fixing the pipes with clamps including chasing the walls, concealing the pipe and making good etc. this includingof jointing of pipes and fitting with CPVC solvent cement & testing the joints complete all as per specification and complete as directed . |
| 22 | Providing and fixing20mm OD SDR 11 CPVC pipepipes having thermal stability for hot and cold water supply including all CPVC plain & Brass threaded fittings fixing the pipes with clamps including chasing the walls, concealing the pipe and making good etc. this includingof jointing of pipes and fitting with CPVC solvent cement & testing the joints complete all as per specification and complete as directed . |
| 23 | Providing and fixingUPVC pipes 90 mm OD 6 Kgf/Sq.Cm pipepipes having thermal stability for hot and cold water supply including all CPVC plain & Brass threaded fittings fixing the pipes with clamps including chasing the walls, concealing the pipe and making good etc. this includingof jointing of pipes and fitting with CPVC solvent cement & testing the joints complete all as per specification and complete as directed . |
| 24 | Providing and fixing PVC rain water pipes conforming to relevant IS type B and PVC SWR fittings & specialsconforming to relevant ISincluding jointing with seal ring / With PVC solvent adhesive including fixing in walls usingclampsetc completeall as per drawings, specifications and as directed by the Engineer-in-charge, (24.1) SWR PIPE 110 mm O/D |
| 25 | Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating ,complete all as specifications and drawings and as directed by the Engineer-in-charge |
| 26 | Providing and fixing heavy quality 15 mm urinal flush cock of approved make |
| 27 | Providing, supplying and fixing JET spray with 1.00 metre long flexible tube connection in European / Anglo Indian closet under seat cover fixtures complete all as specified and as directed by the Engineer-in-charge |
| 28 | Providing and constructing Half brick masonry using bricks of approved quality / class, brand/ make in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-in-charge but excluding reinforcement up to plinth level. (Reinforcementwill be paid under relevant item) |
| 29 | Providing and Paintingwith 1st quality acrylic washable distemper (ready made) with Twocoats on new work of approved make and manufacturer and of required shade and colour, including scaffolding, preparation of the surfaces ,etc., including a coat of approvedcement primer.as per manufacturer"s specifications and as directed by the Engineer-in-charge. |
| 30 | Providing and fixing Indian water closet (Orissa pan) of approved make with 100 mm China ware P or S trap,One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bendwith manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connectionwith all fittings and fixtures complete including all connection, embedding in positioncommissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge. (30.1) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm |
| 31 | Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item), Withclear float glass panes of 6.00 mm thickness |
| 32 | Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item), With tinted colour floatglass panes of 6.00 mm thickness |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
