Tender For Interior Of Suites Gokul Vishranti Grah
Tender Value
1.70 Crore
Estimated cost
Bid Submission
03 Apr 2023
0 days left
EMD
3.40 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chittorgarh → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Interior Of Suites Gokul Vishranti Grah
BOQ
| Sl. No. | Item Description |
| 1 | Labour charge of plumber for toilet fixtationas per design approved by Architect or Engineer-in-Charge. |
| 2 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) Above 3601 Cm2 Slabs. wash basin table top, ledge wall top complete in all respectExtra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete . Granite/Kota Stone Work Full Edge moulding.as per design approved by Engineer-in-Charge. |
| 3 | P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size600 mm X 1200mmMAKE: Varmora, AGL, Kajariaas per approved by Architect & Engineer in Charge. |
| 4 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on floor, walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).upto 8\" heightSize 600mm x 1200mm MAKE: Varmora, AGL, Kajariaas per approved by Architect & Engineer in Charge. |
| 5 | Providing and fixing White Vitreous Rimless, Blind Installation Wall Hung WC with UF soft close seat cover, Hinges, Accessories set, Size: 360x500x330 mm complete in all respectMAKE: Jaquar/hindware/cera as per approved by Architect & Engineer in Charge. |
| 6 | Providing and fixing White Vitreous Rimless, Blind Installation Wall Hung WC with UF soft close seat cover, Hinges, Accessories set, Size: 380x520x365 mm complete in all respectMAKE: Jaquar/ hindware /cera as per approved by Architect & Engineer in Charge. |
| 7 | Providing & fixing of flushing cistern Single Piece Concealed Cistern Body (Front or Top Actuation) with Floor Mounting Frame, Installation Kit and “P-Type” Drain Pipe Connection Set for Wall Hung WC (without Flush Control Plate) of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. MAKE: Jaquar/ hindware/cera as per approved by Architect & Engineer in Charge. |
| 8 | Providing & fixing of flushing cistern control plateMAKE: Jaquar/hindware/cera as per approved by Architect & Engineer in Charge. |
| 9 | Providing and fixing wall hung BIDET with Blind Installation.Size: 360x515x360 mmMAKE: Jaquar/hindware/ceraas per approved by Architect & Engineer in Charge. |
| 10 | Providing and fixing counter top Wash basin of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete.Size: 700x435x135 mmMAKE: Jaquar/hindware/ceraas per approved by Architect & Engineer in Charge. |
| 11 | Providing and fixing counter top Wash basin of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete.Size: 575x430x175 mmMAKE: Jaquar/hindware/ceraas per approved by Architect & Engineer in Charge. |
| 12 | Providing & Fixing Premium quality Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes& Wall Flange as per approved by Engineer in Charge. |
| 13 | Providing & Fixing Single Lever 1-Hole Bidet Mixer with Popup Waste System with 375mm Long Braided Hoses. MAKE: Jaquar/hindware/ceraas per approved by Engineer in Charge. |
| 14 | Providing & Fixing Exposed Part Kit of Single Lever BasinMixer Wall Mounted Consisting ofOperating Lever, Cartridge Sleeve,Wall Flange, Nipple & Spout MAKE: Jaquar/hindware/ceraas per approved by Engineer in Charge. |
| 15 | Providing & Fixing Bath Spout with wall flange MAKE: Jaquar/hindware/ceraas per approved by Engineer in Charge. |
| 16 | Providing & Fixing Exposed Part Kit of Single Lever Shower Mixer with 3-way diverterMAKE: Jaquar/hindware/ceraas per approved by Engineer in Charge. |
| 17 | Providing & FixingVictorian Shower Head Round ø200mm(Bell Type) Single Flow (Body & FacePlate Brass) with Rubit Cleaning SystemMAKE: Jaquar/hindware/ceraas per approved by Engineer in Charge. |
| 18 | Providing & Fixing Shower Arm Straight ø20mm & 450mm Long Round Shape without Bend for Wall Mounted Showers with FlangeMAKE: Jaquar/hindware/ceraas per approved by Engineer in Charge |
| 19 | Providing & Fixing Wall to wall enclosurewith one fixed glass and one openabledoor fixed with the glassGlass: 8mmDimension:H: 1950 W: 1601 - 2000 Finish: ChromeMAKE: Jaquar/hindware/ceraas per approved by Engineer in Charge |
| 20 | Providing & Fixing Corner enclosure with2 fixed glass and 1 openable doorfixed with front panelGlass: 8mmFinish: Chrome Dimension:H: 1950 W: 1600 - 2000Finish: ChromeMAKE: Jaquar/hindware/ceraas per approved by Engineer in Charge |
| 21 | Providing & Fixing Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook |
| 22 | Providing & Fixing Exposed Part Kit of Concealed StopCock & Flush Cock with Fitting Sleeve,Operating Lever & Adjustable WallFlange with Seal |
| 23 | Providing & Fixing Angular Stop Cock with Wall Flange |
| 24 | Providing & Fixing Premium quality stainless steel towel rail 600mm longas per approved by Engineer in Charge. |
| 25 | Providing & Fixing Premium quality Towel Ring Round with Round Flange as per approved by Engineer in Charge. |
| 26 | Providing & Fixing Premium quality Toilet Roll Holder with Stainless Steel Flapas per approved by Engineer in Charge. |
| 27 | Providing & Fixing Premium quality toilet paper Roll Holder as per approved by Engineer in Charge. |
| 28 | Providing & Fixing Premium quality Double Coat Hookas per approved by Engineer in Charge. |
| 29 | Providing & Fixing Premium quality Glass Shelf 600mm Long as per approved by Engineer in Charge. |
| 30 | Providing & Fixing Premium quality Towel Rack with Lower Hanger(Stainless Steel) with hookas per approved by Engineer in Charge. |
| 31 | Providing & Fixing Premium quality Towel Rack 600mm Long with Lower Hangers, Stainless Steelas per approved by Engineer in Charge. |
| 32 | Providing & Fixing Premium quality Robe Hookas per approved by Engineer in Charge. |
| 33 | Providing & Fixing Premium quality Double Arm Wall Mounted Reversible Plain / Magnifying (X3) Pivotal Mirror as per approved by Engineer in Charge. |
| 34 | Providing & Fixing Premium quality Swivel Mirroras per approved by Engineer in Charge. |
| 35 | Providing & Fixing Premium quality Corner Glass Shelf (with Bracket) as per approved by Engineer in Charge. |
| 36 | Modify internal fittings & outer pvc pipeline of all toilets and addition of new points as architectural dwgs including removal of old pipeline & fixing new with material & labour cost as per approved by Engineer in Charge. |
| 37 | FLOORING |
| 38 | P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size600 mm X 1200mmMAKE: Varmora, AGL, Kajariaas per approved by Architect & Engineer in Charge. |
| 39 | P & F 1st quality Heavy Duty Vitrified Double Charged tiles on skirting in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size600 mm X 1200mmMAKE: Varmora, AGL, Kajariaas per approved by Architect & Engineer in Charge. |
| 40 | Repair works of plaster after electrical & sanitary works |
| 41 | providing 4mm groove in plaster above skirting |
| 42 | WOODWORK |
| 43 | Providing and fixing wood panelling on door frames with 12mm ply and 4mm veneer finished with melamine polish as per approved by Architect & Engineer in Charge. |
| 44 | Providing and fixing external grade board solid core single leaf flush door shutters : 30 mm thick with approved fittings & Decorative teak veneer both side and external lipping with 2ndclass teak wood battens 6 mm minimum depth on all edges of shutters finished with Melamine polish complete in all respectas per approved by Architect & Engineer in Charge. |
| 45 | Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters & ss wire mesh shutter for windows and clerestory window with approved fittings . Panelling for panelled and glazed shutter 25 mm to 40 mm thick Wood panel grade 1 Nigeria wood Grade 1finished with melamine polish complete in all respect as per approved by Architect & Engineer in Charge. |
| 46 | Providing & fixing wall panelling 12mm base marine ply with decorative panel as per design as per approved by Architect & Engineer in Charge. |
| 47 | 25mm thick POP molding on sofa back wall @ living room as per approved by Architect & Engineer in Charge. |
| 48 | WALL FINISHES |
| 49 | Providing and applying plaster of gypsum punning over plastered surface to prepare the surface even and smooth complete as per design as per approved by Architect & Engineer in Charge. |
| 50 | Providing and applying superior quality emulsion for wall painting with Velvet touch/Royal paint etc of approved brand and manufacture to give an even shade with putty and preparation of surface applying with the help of paint roller the work 3 coat complete in all respect as per direction of Engineer-in-charge. |
| 51 | Providing and applying wall painting textures of approved brand and manufacture as per direction of Engineer-in-charge. |
| 52 | Providing and applying superior quality emulsion for ceiling painting with Velvet touch/Royal paint etc of approved brand and manufacture to give an even shade with putty and preparation of surface applying with the help of paint roller the work complete in all respect as per direction of Engineer-in-charge. |
| 53 | FALSE CEILING |
| 54 | Providing and fixing 12.5 mm thick tapered edge gypsum board at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. make saint gobain |
| 55 | Providing and fixing ACP false ceiling including providing and fixing of frame work |
| 56 | Providing cove with vertical PATTA in gypsum board including providing and fixing of frame work |
| 57 | Providing and cutting of gypsum false ceiling for fixing of light fixtures as per direction of Engineer-in-charge. |
| 58 | FURNITURE |
| 59 | SOFA # 1 Material & Subtype Leather - Semi Aniline LeatherFrame Material Solid WoodUpholstery Material LeatherSeat Material LeatherLeg Material Stainless SteelFinish MatteColour & Colour Family Brown - Mushroom BrownDimension (W)1960mm X (D)880mm X (H)760mmSeating Capacity 3 SeaterSeating Height 450mm as per approved by Architect & Engineer in Charge. Make: DURIAN/GODREJ |
| 60 | SOFA # 2Upholstery Material LeatherSeat Material LeatherLeg Material Synthetic FibreFinish MatteColour & Colour Family Brown - Tan BrownDimension (W)2110mm X (D)960mm X (H)880mmSeating Capacity 3 SeaterSeating Height 410mm as per approved by Architect & Engineer in Charge.Make: DURIAN/GODREJ |
| 61 | LOUNGE CHAIR WITH ROUND TABLEMaterial & Subtype Marble - Stone,Metal,LeatheretteUpholstery Material LeatheretteSeat Material LeatheretteLeg Material MetalFinish MatteColour & Colour Family White,White - Cream White,Gold,Grey - Ash GreyDimension Of Table (W)600mm X (D)600mm x (H)740mmDimension Of Chair (W)440mm X (D)520mm X (H)820mmSeating Capacity 2 SeaterSeating Height 470mmMaterial & Subtype Marble - Stone,as per approved by Architect & Engineer in Charge.MAKE: DURIAN/GODREJ |
| 62 | CONSOLE TABLEDimensions: H 36” x W 48” x D 12”Primary Material: Green panel Engineered plywood, Veneer, Sirca / Asian polish with APOLLO/Jindal/TATA Metal Steel Frame.Color: Walnut,Finish: Matt Finish,Style: Modern as per approved by Architect & Engineer in Charge. |
| 63 | COFFEE TABLE # 1Made of premium quality and resilient metal.Strong marble top for holding objects of any temperature.Dimension (In Inches): Height 16 (Big table) Height 14 (Small table) Marble size (In Inches): 42 (Big table) 36 (Small table).Metal frame size (In Inches): 40 (Big table) 34 (Small table) as per approved by Architect & Engineer in Charge. |
| 64 | COFFEE TABLE # 2 Material & Subtype Stone - Marble,Engineered Wood - MDFTable Top Material MarbleLeg Material MetalFinish GlossyColour & Colour Family White - Beige WhiteDimension (W)1305mm X (D)700mm X (H) 455mmTable Top Thickness 10mm as per approved by Architect & Engineer in Charge.Make: DURIAN/GODREJ |
| 65 | SIDE TABLE # 1Material & Subtype Solid Wood - Beech Wood,Engineered Wood - MDF,Veneer - Steam Beech VeneerTable Top Material VeneerFrame Material Solid WoodLeg Material Solid WoodFinish MatteColour & Colour Family Brown - Dark OakDimension (W)650mm X (D)455mm X (H)755mm as per approved by Architect & Engineer in Charge. Make: DURIAN/GODREJ |
| 66 | SIDE TABLE # 2Material & Subtype Solid Wood - Beech Wood,Engineered Wood - MDF,Veneer - Steam Beech VeneerTable Top Material VeneerLeg Material Solid WoodFinish Semi-glossColour & Colour Family Brown - WalnutDimension (W)670mm X (D)600mm X (H)760mm as per approved by Architect & Engineer in Charge.Make: DURIAN/GODREJ |
| 67 | TV CONSOLE # 1Finish Color: Beige & CreamDimensions W x H x D (cm): 220 x 45 x 42Style: Contemporary & ModernPrimary Material: Rubber Woodas per approved by Architect & Engineer in Charge.Make: DURIAN/GODREJ |
| 68 | TV CONSOLE # 2 Material & Subtype Stone - Marble,Engineered Wood - MDF,Metal,Solid Wood - Pine WoodTable Top Material MarbleFrame Material Engineered WoodLeg Material MetalFinish GlossyColour & Colour Family Grey - Ash Grey,WhiteDimension (W)1995mm X (D)400mm X (H)450mmas per approved by Architect & Engineer in Charge.Make: DURIAN/GODREJ |
| 69 | TV CONSOLE # 3Material & Subtype Stone - MarbleTable Top Material MarbleLeg Material Solid WoodFinish GlossyColour & Colour Family GreyDimension (W)(2000-2700)mm X (D)350mm X (H)480mmas per approved by Architect & Engineer in Charge. |
| 70 | BENCH @ Living room Overall Dimensions: 63\"W x 19.7\"D x 17.7\"H (1600mmW x 500mmD x 450mmH) Seat Height: 17.7\"/450mmColor Options: WhiteUpholstery Materials: VelvetSeat Fill Material: FoamFrame Material: Solid Wood as per approved by Architect & Engineer in Charge. |
| 71 | UPHOLSTERED BED with headboard # 1: Material & Subtype Engineered Wood - MDF,Fabric - Velvet 1Frame Material Engineered WoodUpholstery Material VelvetLeg Material MetalFinish MatteColour & Colour Family Brown - Dark BrownDimension (W)2135mm X (D)1970mm X (H)1315mmSeating Height 355mmas per approved by Architect & Engineer in Charge. |
| 72 | BED-SIDE TABLE # 1Material & Subtype Engineered Wood - MDF,Fabric - VelvetTable Top Material Engineered WoodUpholstery Material VelvetFinish MatteColour & Colour Family Brown - Dark BrownDimension (W)510mm x(D)400mm x(H)540mmas per approved by Architect & Engineer in Charge. |
| 73 | UPHOLSTERED BED with headboard # 2: Material & Subtype Engineered Wood - MDF,Solid Wood - Beech Wood,Fabric - VelvetFrame Material Engineered WoodUpholstery Material VelvetLeg Material Solid WoodFinish MatteColour & Colour Family Grey - Ash GreyDimension (W)2030mm X (D)2150mm X (H)1410mmSeating Height 395mmSize Kingas per approved by Architect & Engineer in Charge. |
| 74 | BED-SIDE TABLE # 2Material & Subtype Engineered Wood - MDF,Fabric - VelvetTable Top Material Engineered Wood - HDFUpholstery Material VelvetFinish MatteColour & Colour Family Brown - Dark Brown,Grey - Ash GreyDimension (W)515mm X (D)400mm X (H)535mmas per approved by Architect & Engineer in Charge. |
| 75 | MATTRESS # 1 Dimension 78x72x8\"Firmness Medium Soft MattressTypeFoam & Spring with Euro Top Fabric Type Knitted fabric with foam quilting MAKE Duroflex/ sleepwellas per approved by Architect & Engineer in Charge. |
| 76 | MATTRESS # 2 Dimension 78x72x8\"Firmness Medium Soft MattressTypeFoam & Spring with Euro Top Fabric Type Knitted fabric with foam quilting MAKE Duroflex/ sleepwell as per approved by Architect & Engineer in Charge. |
| 77 | MATTRESS PROTECTORDimension 78x72x8\"Features Antiviral, Antibacterial, 100% Waterproof, Safe For SkinWashable Machine WashableMaterial 80% cotton & 20% polyester MAKE Duroflex/ sleepwellas per approved by Architect & Engineer in Charge. |
| 78 | COMFORTOR Dimension 100x90 (2.54 x 2.28)Soft, cosy & reversible comforter with 100% microfibre filling MAKE Duroflex/ sleepwellas per approved by Architect & Engineer in Charge. |
| 79 | PILLOW SET Dimension 27x17x5 Filling Type MicrofibreFabric Type Antimicrobial viscose blend MAKE Duroflex/ sleepwell as per approved by Architect & Engineer in Charge. |
| 80 | BED LINEN Dimension 108x108 Fabric Blend 100% CottonThread Count 200 TC MAKE Duroflex/ sleepwellas per approved by Architect & Engineer in Charge. |
| 81 | DAY BEDMaterial:Fabric, Leather, WoodFabric – Anthracite, Beige, Chocolate, Elephant, Steel, Pearl-02, Taupe-09, Toffee-04Leather – Woody, MuskSize: Width: 180 cm | Depth: 86 cm | Height: 88 cm CONTEMPORARY DESIGN - With braided buttons, waffle stitching, and soft upholstery,Button Waffle Stitching: Button stitching on the seat Bolster Pillow: This lounger includes a matching rolled pillow,Solid Wooden Legs: This lounger is supported by tapered Solid wooden legs as per approved by Architect & Engineer in Charge. |
| 82 | DESKStudy Table (Teak Finish, Creamy Crust) Dimensions119.0 cm x 131.0 cm x 60.0cmConfiguration : ModularFinish Type : Matte No. of Drawers : 2 Material : Solid Wood Material Subtype : Woodas per approved by Architect & Engineer in Charge. |
| 83 | DESK CHAIR upholstered Length: 155 cm (61 \")Max. length: 215 cm (84 5/8 \")Width: 87 cm (34 1/4 \")Height: 74 cm (29 1/8 \")wooden legs as per approved by Architect & Engineer in Charge. |
| 84 | OTTOMAN Round Ottoman with Wood Legs Blue Velvet Upholstery Pouf SIZE 50 X 50 X 40 CM as per approved by Architect & Engineer in Charge. |
| 85 | CARPET @ living roomSize 9 feetx 14 feet Material: Premium High quality WoolConstruction: Hand tufted, Durable cotton canvas backing as per approved by Architect & Engineer in Charge. |
| 86 | CARPET @ bed roomSize 8 feetx 10 feetMaterial: Premium High quality WoolConstruction: Hand tufted, Durable cotton canvas backing as per approved by Architect & Engineer in Charge. |
| 87 | Full Height mirror with wooden frame with dimension 750 x 1800 +- 50 mm as per design as per approved by Architect & Engineer in Charge. |
| 88 | Bathroom vanity mirrorLED Backlit Mirror with BorderItem Shape RectangularFrame Material Alloy SteelMounting Type Wall MountFinish Type PaintedDimensions: 19.68\"W x 27.56\"H x 2\"DEnergy Efficient White LED Lights - 6000K (LED light source is approved for IP44 and tested and approved for bathroom use)CE Certified 110V On/Off Sensor SwitchWhite Painted Steel Base.as per approved by Architect & Engineer in Charge. |
| 89 | BENCH @ BEDQueens Solid Wood 2 Seater BenchProduct Dimensions61.0 cm x 140.0 cm x 46.0 cm Legs Material :Acacia Wood Material :Solid WoodMaterial Subtype :Acacia Woodas per approved by Architect & Engineer in Charge. |
| 90 | 4 SEATER DINING TABLE with CHAIRS MATERIAL & SUB TYPE Sheesham woodseating height : 28\"Structure: Sheesham wood Dimension: w-4\" x d-2\" x h-28\"Cushioning: polyster Top thickness: 18mm as per approved by Architect & Engineer in Charge. |
| 91 | SERVER UNIT High Gloss Sideboard (White Finish) Product Dimensions80.0 cm x 150.0 cm x 45.0 cmcl.Style :ModernNo. of Doors :2 No. of Drawers :3No. of Shelves :4Legs Material :MdfSecondary Material Subtype :Particle Board Material :Engineered WoodMaterial Subtype :Mdf as per approved by Architect & Engineer in Charge. |
| 92 | Curtain set @ living room 11\"-0\" (W)X 11\"-0\" (H)including 2 nos sheer curtains and 2 nos. blackout curtain with ceiling mounted track of length 11 feet as per approved by Architect & Engineer in Charge. |
| 93 | Curtain set @ Bedroom 11\"-0\" (W)X 11\"-0\" (H)including 2 nos sheer curtains and 2 nos. blackout curtain with ceiling mounted track of length 11 feet as per approved by Architect & Engineer in Charge. |
| 94 | Curtain set @ living room 11\"-0\" (W)X 11\"-0\" (H)including 2 nos sheer curtains and 2 nos. blackout curtain with ceiling mounted track of length 11 feet as per approved by Architect & Engineer in Charge. |
| 95 | Curtain set @ Bedroom 11\"-0\" (W)X 11\"-0\" (H)including 2 nos sheer curtains and 2 nos. blackout curtain with ceiling mounted track of length 11 feet as per approved by Architect & Engineer in Charge. |
| 96 | WARDOBE # 1 Providing & fixing of wardrobe with dimenssion 1050 x 550 x 2100+- 50 mm with superior quality 18 mm ply used and duly pasted 1mm laminate on all sides white visible or not visible with 2 mm PVC edge bend on all visible side and 1 mm edge bend on non visible area Make :- Green/Century/Marino as per approved by Architect & Engineer in Charge. |
| 97 | WARDOBE # 2 Providing & fixing of wardrobe with dimenssion 2400 x 550 x 2100+- 50 mm with superior quality 18 mm ply used and duly pasted 1mm laminate on all sides white visible or not visible with 2 mm PVC edge bend on all visible side and .8 mm edge bend on non visible area Make :- Green/Century/Marino as per approved by Architect & Engineer in Charge. |
| 98 | LUGGAGE CONSOLE # 1Providing & fixing of luggage console consisting of stone top with dimenssion 1800 x 550 +- 50 mm with superior quality 18 mm ply used and duly pasted 1mm laminate on all sides white visible or not visible with 2 mm PVC edge bend on all visible side and .8 mm edge bend on non visible area as per approved by Architect & Engineer in Charge. |
| 99 | LUGGAGE CONSOLE # 2Providing & fixing of luggage console consisting of stone top with dimenssion 1050 x 550 +- 50 mm with superior quality 18 mm ply used and duly pasted 1mm laminate on all sides white visible or not visible with 2 mm PVC edge bend on all visible side and .8 mm edge bend on non visible areaas per approved by Architect & Engineer in Charge. |
| 100 | Providing 50litre referigerator of metal body and energy consumption of 100 watt with automatic defrost as per approved by Architect & Engineer in Charge. |
| 101 | Providing digital safe with electronic keyboard as per approved by Architect & Engineer in Charge. |
| 102 | Providing 1500 watt electric kettle stainless steel body of 1.5 l capacity as per approved by Architect & Engineer in Charge. |
| 103 | Providing LED tv 48\" as per approved by Architect & Engineer in Charge. MAKE: SAMSUNG/LG/PANASONIC |
| 104 | Accessories:Decorative planter, Showpieces, Picture frame, wall art, etc.as per approved by Architect & Engineer in Charge. |
| 105 | wall paintings:Decorative planter, Showpieces, Picture frame, wall art, etc.as per approved by Architect & Engineer in Charge. |
| 106 | DECORATIVE FIXTURES |
| 107 | Providing and fixingCeiling light ,LED Nerve plus round recessed type ,LED 6W*1 3000K ,ceiling mounted complete with all reqd. accessoriesas reqd. Make-JAQUARcode-LNEP01R006XW |
| 108 | Providing and fixingCeiling light ,LED Neroround recessed type ,LED 12W*13000K ,ceiling mounted complete with all reqd. accessoriesas reqd. Make-JAQUARcode-LNEP01R012XW |
| 109 | Providing and fixingCeiling light ,LED Neroround surface type ,LED 12W*14000K ,ceiling mounted complete with all reqd. accessoriesas reqd. Make-JAQUARcode-LNRO02R012SN |
| 110 | Providing and fixingDESK LAMP-1 LT ivory fabric shade with aluminium finishing Table lamp.Fixture height 1375(H)*240(D) MAKE- JAQUAR Model no.-STL-WHT-TL-688T |
| 111 | Providing and fixingFLOOR LAMP-1 LT Opal glass shade with marble base & chrome finishing floor lamp.Fixture height :1900mm,Lamp:E-27 LED 14W*1. 1250(L)*300(D)*1900(H)MAKE- JAQUAR Model no.-KPT-CHR-ML49061A |
| 112 | Providing and fixingwall lamp (for bed room beside bed)-1 LT copper glass with cognac finishing wall lamplamp. fixture height-550 ,Lamp:E-14 LED 4W* 1130(L)*210(W)*550(H) MAKE-JAQUAR,Model no-COG-WL1216W |
| 113 | Providing and fixingMirror light -2 light conical opal glass with nickel finish wall lamp ,LED 4W*2 . MAKE-JAQUAR |
| 114 | Providing and fixingwall lamp -2 light frosted glass with Gold finish wall lamp ,LED 4W*2 . (as per Attached sheet item no 8)MAKE-JAQUAR |
| 115 | Providing and fixingwall lamp -1 light matt opal glasswith nickel finish wall lamp ,LED 4W*1 .MAKE-JAQUAR |
| 116 | Providing and fixingStrip light-1Pack of 5 mtr ,5W/meter indoor strip of power25W.MAKE-JAQUAR |
| 117 | Providing and fixingMagnetic track slim 2M surface mounted track complete as reqd. .MAKE-JAQUAR , LTRKSNTRXS |
| 118 | Providing and fixing orelli slim magnetic track light with die cast Aluminium housing ,48V DC Operated 7 watts-3000Kcomplete as reqd. .MAKE-JAQUAR , LORLS24R07XW |
| 119 | FAN # 1 -Providing and fixing Devil\"s Advocate (53\"span,black finish metal body, teak wood finish wooden blades),Motor wattage 60 W ,motor input voltage220-240 V AC /50-60Hz (DC motor Fan with Adaptor),300RPM,Favn CFM 6300 with all necessary Accessoriescomplete as reqd. .MAKE-The white teak Company BY ASIAN PAINTS |
| 120 | FAN # 2 -Providing and fixing Upgrade(1400mm sweep,antique bronze finish metal body, wallnutfinish mdf blades),Dimmable LED light with remote control ceiling fan,Motor wattage 55 W ,motor input voltage220-240 V AC /50-60Hz (DC motor Fan with Adaptor),Holder and plug type built in dimmable LED ,No. of bulb holder 1 built in LED provided .Special features dimmable LED with remote control. Bulb wattage 40W .LED temperature 3000K-6500K .LED colour- Warm white/Day light/Cool white, with all necessary Accessoriescomplete as reqd. .MAKE-The white teak Company BY ASIAN PAINTS |
| 121 | CHANDLIER # 1 - providing and fixing of 6LT frosted glass with matt gold finishing pandent with Lamp:G9 LED 4W*6 ,Fixture height:300-600mm, 1100mm(D)*1400mm(H) MAKE-JAQUAR Model no-STL-GLD-SL1153S6 |
| 122 | CHANDLIER # 2 - providing and fixing of 24LT Trumpt stylewith gold finishing pandent with Lamp:E14 LED 4W*24 ,Fixture height:730mm, 1500mm(D)*1400mm-2000mm(H) MAKE-JAQUAR Model no-STL-GLD-SL1133S6 |
| 123 | S.I.T.C, ofpower key card switch for cottages |
| 124 | Providing & Fixing of 900mm copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanConforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. MaKe-Orient/Crompton/Usha |
| 125 | ELECTRICAL WORKS |
| 126 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it\"sISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 127 | Short point (up to 3 mtr.) |
| 128 | Medium point (up to 6 mtr.) |
| 129 | Long point(up to 10 mtr..) |
| 130 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it\"s ISI marked (IS:3419-1988)accessories, Hot Dipped GalvanizedModular box of 1.2 mm thick with earth terminal, 10 A modularswitch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 131 | On board |
| 132 | Medium point (up to 6 mtr.) |
| 133 | Long point(up to 10 mtr..) |
| 134 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 135 | 20 mm |
| 136 | 25 mm |
| 137 | 32 mm |
| 138 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 139 | 1 x 1.5 sq.mm |
| 140 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 141 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 142 | 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. |
| 143 | 4 x 6.0 sqmm |
| 144 | 4 x10.0 sq. mm. |
| 145 | 1x 4.0 sqmm |
| 146 | Providing & Fixing ofof BLDC Technologyventilating fans , single phase with PVC impeller, ABS body, Double Ball bearing, automatic back lower shutterincluding making connection, testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 147 | 250 mm sweep |
| 148 | Providing & Fixing ofextra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steelpipe including cutting, threading, drilling, fixing quarter pin etc as reqd.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 149 | Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 150 | 5 step fan regulator 2 Module 360 dgree rotating |
| 151 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminiumhousing with in built driver, System lumen efficacy = 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.=0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 152 | 1170mm(+/-10%) LED batten with min. lumen output 2200 lm |
| 153 | Supply & Fixing of Dry Powder Agent (as per IS 4308:2019), ABC typeFire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 28 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificatefrom OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 154 | 6 kg |
| 155 | P & F 1.2mm thickM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 156 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 157 | Glazed door (Threephase) IK-09 and IP-43with Metal end box |
| 158 | 4 way |
| 159 | 6 Way |
| 160 | Providing & Fixing of Recessed/surface mounting heavy duty Enclosure made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted complete with din rail making internal DB terminations with copper lugs, detachable gland plate, including making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 161 | Suitable for Two / Three / Four module for MCB |
| 162 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 163 | Single pole MCB (With B/C curve tripping Characteristics) |
| 164 | 6-32 A |
| 165 | Double pole MCB(With B/C curve tripping Characteristics) |
| 166 | 6 A to 32 A rating |
| 167 | Four pole MCB (With B/C curve tripping Characteristics) |
| 168 | 50-63 A rating |
| 169 | Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 170 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) includingtesting etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 171 | 35.0 Sq. mmx3.5 core |
| 172 | Supplyandinstallationofhigh tensile low carbon steel rod molecularly bonded with 99.9 % Copperthickness (250 microns) andconfirming toUL 467, IS/IEC 62561-2of following size and length and as per point mentioned (a), (b), [c), (d), (e) below :- |
| 173 | (a) Bore a hole of dia. 100 mm of required length, Place the rod in the centre of Hole |
| 174 | (b)filled with anti corrosiveconductivecompounds with the permanent sealings at both the ends, CPRI/ ERDAtested with RMS capacity of minimum 30 KA for withstanding 1 second .To ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 Kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. The compound shall be tested form NABL acredeated labfor lowresistivity ( less than 0.12 Ohm - meter ) & high conductivity in nature with carbon as a major contentas per referance of IS 3043-1987,IEEE 80-2013 (clause 14.5d) , IEEE 837 & IER 1956 with latest amendemnts |
| 175 | © Connect the rod with copper Strip/Conductor/Wire with suitable clamp made from tinned copper and SS 304 Bolt |
| 176 | (d) Place Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height250 to 300 mm. |
| 177 | (d)Testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book. |
| 178 | (e) Test certificatesfor confirming above standards from OEM is mandatory. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 179 | 17.2 mm thick and 3 Mtr. Long |
| 180 | Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles,making connection with GI/Cu purity purity >95%thimble etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 181 | 8 SWG tinned copper Wire |
| 182 | Supply , Installation, Testing and Comissioning ofInverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and50 hz , single phaseACsupply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 183 | 1.5 TR ISEER not less then 3.8 |
| 184 | 1.8 TR ISEER not less then 3.8 |
| 185 | Supply, Fixing and testing of following capacity ISO certified company made wall mounted stabilizer having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp /20 Amp Industrialplug top making connection etc complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 186 | 4 kVA |
| 187 | 5 kVA |
| 188 | Making hole in stone masonary/ RCC wall/ RCC slab with core cutter for accomodating refrigerant pipe/ drain pipe/ MS pipe/ cables etc of following dia |
| 189 | 100 mm dia per running inch length |
| 190 | Supply & fixing MS powder coated stand suitable for 1.0/1.5/ 2.0 Tr outdoor type of Split AC.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 191 | Providing & Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping withfittings (IS:7834 & 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing,support with MS hanger on ceiling or recessed in wallwith chasing & plastering with 6 mmthickclosedcellelastomeric nitrile rubberinsulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 192 | 25 mm |
| 193 | Supply, installation, testing and comissioning ofinterconnectingcopperrefrigerant pipingof DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink MarkBrand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified \"Class O\" in Fire Propagationas per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 194 | 15.9 mm O.D., wall thinkness = 0.8mm (insulation – 13 mm thick) |
| 195 | 12.7 mm O.D., wall thinkness = 0.8mm (insulation – 13 mm thick) |
| 196 | 9.5 mm O.D., wall thinkness = 0.8mm (insulation – 13 mm thick) |
| 197 | 6.4 mm O.D., wall thinkness = 0.8mm (insulation – 13 mm thick) |
| 198 | Providing & Fixing of din rail mounting contactor and accessories confirming to IEC 61095 with following description and configuration in existing distribution board / sheet including making connections, testing etc. as required.OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 199 | Modular contactor 63A - 4NO |
| 200 | Providing & Fixing of Recessed/surface mounting heavy duty Vertical TPN Distribution board with Metal end box withprovision of incomer suitable for MCB / RCCB and SP / TP MCB as outgoing ,made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (for double door DB only ) complete with insulated 100 A rating copper bus bar, neutral bars with shrouds, earth bar , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 201 | Double door IK-09 & IP-43 with Metal end box |
| 202 | 4 Way(8+12) |
| 203 | SITC of3 /4pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator,line load interchangeability,designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree,pollution degree 3, having positive isolation capability, push(test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage690 V.provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.OEM shall have submitNABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 204 | 4 pole MCCB With Thermal Magnetic release |
| 205 | up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C setting, |
| 206 | Providing & Fixing of Vertical(BEE 5 star rated) / Horizontal( BEE 3 star rated) storage water heater with outer casing made of Engineering Plastic sheet (Upto 25 Ltr) / Metal rust proof Body (35 & 50 Ltr), Glass - line / Titanium Enamel coated Pressure Pump Compatible 8 bar pressure Inner tank, Glass Line Coated , mineral filled heating element, stem type, snap actionadjustable thermostat , Dual indicating lampsInjected PUF insulation, Multi Function Valve etc. as required held in position with 2/4 no. 10/12 mm anchor Fastener, duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top with Portable Residual Current Device ( PRCD ) , including making inlet, outlet Flexible alloyconnection, testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 207 | 15 Ltr |
AI Tender Summary
Tender Timeline
Mar 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender