Construction Of Paloorkkavu- Karivara Road In Peruvanthanam Gramapanchayat Earth Work, Rcc, Pcc, Wmm, Tack Coat, Seal Coat Etc
Tender Value
18.86 Lakhs
Estimated cost
Bid Submission
01 Apr 2023
0 days left
EMD
47161
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
peruvanthanam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Paloorkkavu- Karivara Road In Peruvanthanam Gramapanchayat Earth Work, Rcc, Pcc, Wmm, Tack Coat, Seal Coat Etc
BOQ
| Sl. No. | Item Description |
| 1 | 1 Retaining wall and Road Retarring |
| 2 | 8.3.2.AEarthwork in Hill Road(ii)Excavation in Hilly Areas in Soil by mechanical meansA)Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopesanddisposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical SpecificationClause 1603.1 |
| 3 | od312286/2022_2023DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good qualityblasted rubble including packing to compactness to lines and levels cost and conveyance of all materialslabour charges etc. complete as per direction of Departmental officers at site |
| 4 | 75.8.1.1.AProviding Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 courseaggregate) laid to required slope as required including compaction, finishingand tamping etc .complete.Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as perspecification(i) Nominal mix (1:2:4) |
| 5 | 4.9Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specificationincluding premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixedmaterial by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-baseand compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density includinglighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and TechnicalSpecification Clause 406.By Mechanical Means with 1 km lead |
| 6 | 75.5.5.B.2pbModified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen RatesConstruction of penetration macadam over prepared base by providing a layer of compacted crushedcoarse aggregate using chips spreader with alternate applications of bituminous binder and keyaggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree ofcompaction as per Technical Specification Clause 506.,including supplying and stacking of materials. |
| 7 | 75.5.1.1pbPrime Coat - Low porosity - With Packed Bitumen RatesProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular baseincluding cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanicalmeans as per Technical Specification Clause 502 |
| 8 | 75.5.2.2pbTack Coat - With Packed Bitumen RatesProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulicbroom as per Technical Specification Clause 503. |
| 9 | 75.5.2.1pbTack Coat - With Packed Bitumen RatesProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 10 | 75.5.9.1.2pb20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.Case - I By Manual Means(II)Bitumen (S-65),including supplying and stacking of materials. |
| 11 | 75.5.12.A.1.2pbSeal Coat - Manual Means - Type A - Bitumen S-65 - Packed Bitumen RatesProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510A.By Manual MeansCase I : Type A(II)Bitumen (S-65),including supplying and stacking of materials. |
| 12 | 75.8.1Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate)laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing andtamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etccomplete as perspecification(i) Nominal mix (1:2:4)a)Materials |
| 13 | od312290/2022_2023Providing and fixing of good quality granite name board with lettering including of all cost, conveyance ,labour charges etc complete including fitting the board in concreting filling PVC pipe post with 63mm dia. |
AI Tender Summary
Tender Timeline
Mar 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender