|
| 1 | Supply & Commissioning of the following work including carriage commissioning with all required material as per RESPO Norms Note :- All Required material to be supllied by contractor as per GTP Approved. |
| 2 | ST Pole 11 Mtr. Long SP-55 (Bottom Portion Galvanized), Erection & Grouting with PCC (1:2:4) work including fixing of all accessries for pole pole S/s as per RESPO manual or as per direction of Engineer Incharge. Labour, T &P and all rqureied material carrier etc own by contractor at his own cost for proper completion of work. |
| 3 | ST Pole 13 Mtr. Long SP-55 (Bottom Portion Galvanized), Erection & Grouting with PCC (1:2:4) work including fixing of all accessries for pole pole S/s as per RESPO manual or as per direction of Engineer Incharge. Labour, T &P and all rqureied material carrier etc own by contractor at his own cost for proper completion of work. |
| 4 | PCC Pole 8.5 Mtr. Long Erection & Grouting with PCC (1:2:4) work including fixing of all accessries for pole pole S/s as per RESPO manual or as per direction of Engineer Incharge. Labour, T &P and all rqureied material carrier etc own by contractor at his own cost for proper completion of work. |
| 5 | 11 KV XLPE Cable (3x185 sqmm) |
| 6 | 11 KV XLPE Cable (3x300 sqmm) |
| 7 | 33 KV XLPE Cable (3x300 sqmm) |
| 8 | 11 KV Straight Throught I/O/D (3x300 sqmm) |
| 9 | 33 KV Cable Jointing Kit I/O/D (3x300 sqmm) |
| 10 | 11 KV Cable Jointig Kit (3x185 sqmm) |
| 11 | M.S. Top Channel |
| 12 | M.S. Top Channel 33 KV |
| 13 | M.S. Dropper Channel |
| 14 | M.S. Base Angle. |
| 15 | 11 KV VCB OG/200/100/5A/350 MVA |
| 16 | 11 KV Disc insulator with fitting |
| 17 | 11 KV V Type Cross Arm |
| 18 | 33 KV V Type Cross Arm |
| 19 | Stay set Complete |
| 20 | Dead End Clamp |
| 21 | L.T. Distribution Box |
| 22 | Distribution Box Clamp |
| 23 | M.S. T Off Channel |
| 24 | F-Bracket |
| 25 | 33 KV Cross Arm Holding Clamp |
| 26 | 33 KV Bracket |
| 27 | 11 KV Cross Arm Holding Clamp |
| 28 | 11 KV Pin insulator with pin |
| 29 | Danger Board |
| 30 | Earthing Complete |
| 31 | Earth Wire Clamp |
| 32 | Barbed Wire |
| 33 | G.I. Wire 6 SWG |
| 34 | G.I. Wire 8 SWG |
| 35 | Suspension Clamp |
| 36 | Guarding Angle |
| 37 | Guarding Angle 65x65 |
| 38 | Guarding Angle Clamp |
| 39 | ACSR Dog Conductor |
| 40 | ACSR Weasel Conductor |
| 41 | ACSR Racon Conductor |
| 42 | L.T. Clamp |
| 43 | TPMO |
| 44 | 11 KV DO Fuse Set |
| 45 | Bolt & Nut with washer |
| 46 | 400 sqmm S/C LT PVC cable from T/F to MCCB to LT TVM |
| 47 | 11 KV Pole Mounted CT PT Unit |
| 48 | Holding Clamp for Double Pole |
| 49 | ABC (3x50+1x35+1x16 ) sqmm |
| 50 | 33 KV Isolator set |
| 51 | 33 KV Lighting Arrestor |
| 52 | 90 IBLS Rail Piesces (44.64 KG/M) |
| 53 | 33 KV VCB with Single T/F control panel and CT 200/100/1A with Structure |
| 54 | Structure for Above |
| 55 | Bus Coupler |
| 56 | 33 KV Core Cable 300 sqmm XLPE Cable |
| 57 | Control Cable 4x2.5 sqmm |
| 58 | Control Cable 2x2.5 sqmm |
| 59 | 33 KV Single Phase PT 33/110 Volt |
| 60 | 33 KV Fuse Set |
| 61 | PG Clamp |
| 62 | 33 KV Pin Insulator with Nut |
| 63 | 33 KV Disc Insulator |
| 64 | 33 KV Disc Fitting |
| 65 | 33 KV MS T off Channel |
| 66 | E Bracket 33 KV |
| 67 | 33/11 KV Line Isolator |
| 68 | 33 KV Bus Isolator |
| 69 | Terminal Gantary |
| 70 | M.S. Angle Bracing |
| 71 | Extra Dropper Channel |
| 72 | Extra T Channel 25x50x16 |
| 73 | Riser for 11 KV 3x185 sqmm XLPE cable |
| 74 | Bus Bar Complet |
| 75 | H.D.P.E. Pipe 6\" Dia |
| 76 | G.I. Pipe 6\" Dia |
| 77 | 63 KVA T/F |
| 78 | 100 KVA T/F |
| 79 | 250 KVA T/F |
| 80 | 400 KVA T/F |
| 81 | Laying of 11 KV 3x185 sqmm XLPE cable single circuit due to Road crossing by drill machine/H.D.D. Machine threw H.D.P.E. Pipe 6\" Diaincluding the cost of arrangment of labour, T&P & Drill mchine/H.D.D. machine at a depth of 1.0 mtr. Below the ground level. |
| 82 | Hoisting and Stringing of with 6\" Dia G.I. Pipe for 11 KV 3x185 sqmm XLPE overhead Cable includes unroling cutting / megaring & sealing both ends as per Norms. |
| 83 | 11 KV 3x185 sqmm XLPE Cable by digging and laying complete work at a depth of 1.0 mtr. Below the ground level. |
| 84 | 11 KV 3x185 sqmm XLPE Double circuit cable digging and filling by sand and bricks then laying earth and its levelling and rammuring etc.complete work at a depth of 1.0 mtr. Below the underground level. |
| 85 | Laying of 11 KV 3x185 sqmm XLPE cableby Drill machine(Double Circuit i.e. 1500x2= 3000 Mtr.)including the cost of arrangment of labour, T&P & Drill mchine/H.D.D. machine at a depth of 1.0 mtr. Below the underground level. |
| 86 | Road restoration charges due to digging/cutting of pucca road including the cost of arrangment of labour, T&P & as per site requirment including the permission from concering department by the contractor if required. |
| 87 | Laying of 11 KV Riser for 3x185 sqmmXLPE Cable . |
| 88 | Laying of 11 KV 3x300 sqmm XLPLE cable single circuit due to Road crossing by drill machine/H.D.D. Machine threw Doube Circuit H.D.P.E. Pipe 6\" Dia including the cost of arrangment of labour, T&P & Drill mchine/H.D.D. machine at a depth of 1.0 mtr. Below the underground level. |
| 89 | 11 KV 3x300 sqmm XLPE Cable by digging and laying complete work with bricks and sand at depth of 1.0 mtr below underground level. |
| 90 | Laying of 33 KV 3x300 sqmm XLPLE cable single circuit due to Road crossing by drill machine/H.D.D. Machine threw Doube Circuit H.D.P.E. Pipe 6\" Dia including the cost of arrangment of labour, T&P & Drill mchine/H.D.D. machine at a depth of 1.2 mtr. Below the undeground level. |
| 91 | 33 KV 3x300 sqmm XLPE cable digging and filling by sand and bricks then laying earth and its levelling and rammuring etc.complete work as at a depth of 1.2 mtr. Below the ground level. |
| 92 | Fixing of G.I. Pipe 6\" Dia on Double Pole with Clamps and other accesseories for Hoisting of 33KV 3x300 sqmm XLPE Cables and all associated works to complete the job satisfactory as per RESPO norms. |
| 93 | Dismentaling of 5 MVA Old & Used T/F from Plinth to Switchyard. Work including opening of its all accessories, HV & LV side jumpers, Netural and Body Earthing. Shifting & Store of 5 MVA Dismentaled T/F and its accessories from Plinth to required safe place in switchyeard approx. distance up to 20 Mtr. |
| 94 | Dismentaling of 8 MVA Old & Used T/F from Plinth to Switchyard. Work including opening of its all accessories, HV & LV side jumpers, Netural and Body Earthing. Shifting & Store of 8 MVA Dismentaled T/F and its accessories from Plinth to required safe place in switchyeard approx. distance up to 20 Mtr. |
| 95 | Removal of Old and used 25 KVA T/F and Received back to Store Agra. |
| 96 | Removal of Old and used 63 KVA T/F and Received back to Store Agra. |
| 97 | Removal of Old and used 100 KVA T/F and Received back to Store Agra. |
| 98 | Removal of Old and used 160 KVA T/F and Received back to Store Agra. |
| 99 | Removal of Old and used 250 KVA T/F and Received back to Store Agra. |
| 100 | 10 MVA Power T/F will be provided by Department. |