|
| 1 | Supply of following materials- |
| 2 | STP 11 Mtr as per specification |
| 3 | ST POLE 9 Mtr as per specification |
| 4 | PCC 8.5 Mtr as per specification |
| 5 | ACSR Dog Conductor as per specification |
| 6 | ACSR Weasel Conductor as per specification |
| 7 | V X-arm 11 KV as per specification |
| 8 | T/F 400 KVA as per specification |
| 9 | T/F 250 KVA as per specification |
| 10 | T/F 100 KVA as per specification |
| 11 | T/F 63 KVA as per specification |
| 12 | 11 KV XLPE Cable 3X300 Sqmm as per specification |
| 13 | 11 KV Pin Insulator With Pin as per specification |
| 14 | 11 KV Disc Insulator With Fitting as per specification |
| 15 | Earthing Complete as per specification |
| 16 | 11 KV VCB for O/G CTR 200/100/5A as per specification |
| 17 | 11 KV XLPE Cable 3x185 sqmm (Double Circuit) as per specification |
| 18 | 11 KV XLPE Cable 3x120 sqmm (Double Circuit) as per specification |
| 19 | Jointing kit 3x120 sqmm. O/D as per specification |
| 20 | Jointing kit 3x185 sqmm. O/D as per specification |
| 21 | Jointing kit 3x300 sqmm. O/D as per specification |
| 22 | Jointing kit 3x120 sqmm. I/D as per specification |
| 23 | Jointing kit 3x185 sqmm. I/D as per specification |
| 24 | Jointing kit 3x300 sqmm. I/D as per specification |
| 25 | AB Cable 3X120 + 1X95 + 1X16 Sqmm as per specification |
| 26 | AB Cable 3X95 + 1X70 + 1X16 Sqmm as per specification |
| 27 | PG Clamp as per specification |
| 28 | 11 KV TPMO as per specification |
| 29 | LT PVC CABLE 3.5x150/70 as per specification |
| 30 | LT cable 1X400 Sqmm as per specification |
| 31 | LT cable 1X240 Sqmm as per specification |
| 32 | LT Distribution Box as per specification |
| 33 | 11 KV Fuse Set as per specification |
| 34 | MS Cross Bracing 65x65x6 mm, 2700 mm long angle with clamp as per specification |
| 35 | Stay Set Complete as per specification |
| 36 | V-Cross Arm Clamp 11 KV as per specification |
| 37 | F Bracket as per specification |
| 38 | F Bracket Clamp as per specification |
| 39 | Top Channel as per specification |
| 40 | Droper Channel as per specification |
| 41 | T-Off Channel as per specification |
| 42 | Top / Dropper / T-Off Channel Clamp as per specification |
| 43 | Transformer Base as per specification |
| 44 | Nut & Bolt as per specification |
| 45 | Danger Board as per specification |
| 46 | Barbed Wire as per specification |
| 47 | Guarding Angle as per specification |
| 48 | Guarding Angle Clamp as per specification |
| 49 | Eye Bolt as per specification |
| 50 | LT Clamp as per specification |
| 51 | Eye Hook as per specification |
| 52 | Suspension Clamp as per specification |
| 53 | Dead End Clamp as per specification |
| 54 | Piercing Clamp as per specification |
| 55 | 1X16 Sqmm Al. Cable for Distribution Box as per specification |
| 56 | Distribution Box Clamp as per specification |
| 57 | G.I. Wire 6 SWG as per specification |
| 58 | G.I. Wire 8 SWG as per specification |
| 59 | GI Pipe 6 Dia along DP as per specification |
| 60 | Stone pad (300X300X75) |
| 61 | Chemical Earthing for VCB as per specification |
| 62 | Pale Fencing as per specification |
| 63 | LT SHACKLE INSULATOR as per specification |
| 64 | Erection work for System Strengthening and Construction of New 11 KV and LT lines for New Nagar Panchayat Chowk, Partawal, NP Ghughuli (extension) and NPP Maharajganj (extension) Under EDD-I Maharajganj |
| 65 | The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all clamps and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required.1) 8.5 Mtr Single PCC Pole. |
| 66 | The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all clamps and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required.1) 9.00 Mtr ST Pole. |
| 67 | The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all clamps and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. 1)11Mtr Long STP, SP-55 Round Pole |
| 68 | Grouting of supports in CC 1:4:8 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per drawing. Work includes back filling and proper ramming.1) 8.5 Mtr PCC Pole |
| 69 | Grouting of supports in CC 1:4:8 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per drawing. Work includes back filling and proper ramming.2) 9.0 Mtr ST Pole |
| 70 | Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc. |
| 71 | Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 33KV and Stay Clamps. |
| 72 | Installation of 11 KV X-arm on Poles with Cross Arm Holding Clamp as per specification. |
| 73 | Installation of Top Channel /T-off channel with clamp with nut and bolts. |
| 74 | Installation of Dropper angle/ Guarding angle with clamp Nut And Bolts. |
| 75 | Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductorin accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel. |
| 76 | Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasel conductorin accordance with profile and sag chart including binding, Jumphering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel. |
| 77 | Guarding between two poles like single poles, double poles, four poles, etc. to guard L.T., 11KV Line telephone line and river crossing, road crossing etc. with G.I. wire No.6SWG and G.I. wire No.8SWG, includingcutting with fabrication and fixing of guarding cross arm withclamps, nut & bolts etc, as per drawing. |
| 78 | Chopping of branches of trees of eucalyptus, Neem, Banyan and other kind of trees along the route of the line and disposal of the same at suitable place. |
| 79 | Installation of GI Pipe of 150 mm Dia 2mm thick, 3 mtr long with Clamps Nut and Bolts. |
| 80 | Wrapping of barbed wire on 8.5 Mtr. PCC/ 11 Mtr. ST SP-55 Poles as anti-climbing device for a length of 0.9Mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. from the ground, complete with providing and fixing of lower end & upper end clamps made of M.S. Flat 40x5mm complete with nuts & bolts. |
| 81 | Digging of Cable Trench of size 1050mmx750mm, for laying of 11KV, 3x120/185/300 Sq.mm. Cable, along the Road. |
| 82 | Safe laying of 11KV, 3x120/185/300 Sq.mm. XLPE Cable in Cable Trench to respective Double Pole. |
| 83 | Providing and Laying of Ist Class Bricks, along the length on both side of 11KV XLPE Cable in Cable Trench (minimum 27No. Bricks/Mtr per Cable) and Stone Slab of size 450x600x50mm on top of the each Cable, including providing & filling River Sand inside the Bricks. |
| 84 | Back filling of excavated earth in the cable trench upto the ground level and ramming properly. |
| 85 | Road restoration charges for Pucca Road |
| 86 | Earthing of 8.5 Mtr PCC Pole with M.S. earth Rod of (20x2500)mm long including excavation of pit and driving M.S.Rod 3.0M apart from suppor and 0.5M below the ground level and connecting belowl the earth electrodes with the help of G.I.wire No. 6 SWG and earthing lugs. |
| 87 | Earthing of 11 Mtr ST Poles with M.S. earth Rod of (20x2500)mm long including excavation of pit and driving M.S .Rod 3.0M apart from suppor and 0.5M below the ground level and connecting below the earth electrodes with the help of G.I. wire No. 6 SWG and earthing lugs. |
| 88 | Laying of LT Cable 3.5x150 sqmm |
| 89 | Laying, spreading, lifting and final sagging of LT AB Cable3x95/120 sqmm in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement. |
| 90 | Construction of 250 KVA/400KVA Transformer Plinth of size 2.0x2.0x1.5m as per specification. |
| 91 | Providing & fixing of SMC Danger board/Number Plateat each location as per specification of the drawing. Size 200mmx250mm & 3mm thickness with G.I Clamp & nut & bolt. |
| 92 | Laying of LT PVC Cable of size 1x240 sqmm |
| 93 | Installation of LT distribution box on PCC Pole with Clamp, Nut and Bolt. |
| 94 | Making of Cable end termination by 11 KV 3x120/185/300 sqmm XLPE O/D Cable Jointing Kit. |
| 95 | Making of Cable end termination by 11 KV 3x120/185/300 sqmm XLPE I/D Cable Jointing Kit. |
| 96 | Installation of M.S. Angle of size 75x75x6x2028 mm for T/F base with clamp, Nut and Bolts |
| 97 | Installation of distribution Transformer on Double Pole structure with H.T and LT side connection and Transformer Body & Neutral Earthing by 50x6 mm size M.S Flata) 63 KVA |
| 98 | b) 100 KVA |
| 99 | c) 250 KVA |
| 100 | d) 400 KVA |
| 101 | Installation of 250 KVA/400 KVA distribution Transformer on Plinth with H.T and LT side connection and Transformer Body & Neutral Earthing by 50x6 mm size M.S Flat. |
| 102 | Installation of Pale Fencing around 250 KVA/400 KVA distribution Transformer. |
| 103 | Installation, Testing, commissioning and earthing of 11 KV outgoing VCB Panel of CTR-200/100/5A, 350 MVA |
| 104 | Installation of 11 KV TPMO ,Fuse Set with Clamp and Nut& Bolt. |
| 105 | Laying of LT PVC Cable of Size 1x16 sqmm |
| 106 | Installation of Cross Brassing with Clamp,Nut and Bolt |
| 107 | Erection of Chemical Earthing with MS Flat of size 50x6 mm with Nut and Bolt. For earthing of 11 KV VCB Panel. |
