|
| 1 | Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P complete in all respect.(PS No. 649) |
| 2 | Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P complete in all respect.(PS No. 650) |
| 3 | Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect.(PS No. 647) |
| 4 | Supply and fixing of LED Street light Fitting havingdie cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect. (PS No. 1422) Cat-AAA |
| 5 | Supply and fixing of LED Street light Fitting havingdie cast aluminium body and diffuser with driver set suitable for 110 watt to 130 Watt. Confirming to IP66 Protection complete in all respect. (PS No. 1424) Cat-AAA |
| 6 | Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.(Kalinga, Grandlay, Skytone, Havell\"s make)1) 25 Sq.mm. x 2 Core |
| 7 | S/F of cable Lug(socket) to the cable lead. Complete in all respects as per PS No. 5041) 25 Sq.mm. |
| 8 | S/Laying of90 mm dia (OD 90 mm & ID 76 mm nominal) size of (DWC) HDPE Pipes ISI marked along wigh all accessories like socket, bend, couplers etc. conforming to IS 14930, Part-II complete with filling and cutting, jointing etc. direct in ground ( 75 cm below ground level) including excavation and refilling the trench pat excluding sand cushioning and protective covering etc. Complete in all respects. Rex/Duraline/Time/CPE make. as per DSR 2018 item no. 14.16.2 page no. 52 |
| 9 | Supply and buring of safe earthing electrode T-19 (Hot dip galvanized), length up to 2000mm outer type 50mm, inner pipe, 22mm terminal dia 12mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip galvanization up to 100 micron filled with crystalline conductive mixture(CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good micture of retaining capicity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I. strip will be extra as per PS No. 725A |
| 10 | Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.DSR-2018 Item No.14.06 |
| 11 | Cement Concrete with 2 cm gauge stone grit, coarse sand & cement in proportion of 4:2:1 including supply of all material, Labour , tools & plants etc. Required for proper completion of work. SOR No. 279(a) |
| 12 | Hiring of welding set charges running time @ 6 hrs (AOR) |
| 13 | Hiring of gas cutter set charges with oxygen and LPGrunning time @ 6 hrs (AOR) |
| 14 | S/L of 25x3 mm. G.I. Strip from earth electrode directly in the ground as required complete in all respects (P.S. No. 716) |
| 15 | Dismantling of pole/street light standard/strup ambedded in cement concrete fondation etc. as required DSR-2018, 12.42 |
| 16 | Providing and making steel pole collar with cement concrete (1 cement:3coarse sand: 6 stone aggregate 20 mm) of specified size and shape including form wo0rk, plastgering if required, curing etc as required. (volume of pole/pipe not to be deducted) DSR-2018 14.8 |
| 17 | Numbering of poles & post with combination of yellow and black colour paint etc. complete in all respects as per direction of E/I. (AOR) |
