}

Tender For Construction Of 1 Lakh Litre Sump Pump Room Water Supply Arrangements To Aroma Nagar Village In Munneerpallam Panchayat Of Palayamkottai Panchayat Union, Tirunelveli-Tamil Nadu

Rural Development And Panchayats Department has published Tender For Construction Of 1 Lakh Litre Sump Pump Room Water Supply Arrangements To Aroma Nagar Village In Munneerpallam Panchayat Of Palayamkottai Panchayat Union. Submission Date for this Tender is 30-03-2023. Pump Supply Tenders in Tirunelveli Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

36962209
Tender For Construction Of 1 Lakh Litre Sump Pump Room Water Supply Arrangements To Aroma Nagar Village In Munneerpallam Panchayat Of Palayamkottai Panchayat Union
Open Tender
Indian
Tamil Nadu
Tirunelveli
30-03-2023

Tender Details

Construction Of 1 Lakh Litre Sump Pump Room Water Supply Arrangements To Aroma Nagar Village In Munneerpallam Panchayat Of Palayamkottai Panchayat Union

Key Value

Document Fees
Refer document
EMD
INR 12950.0 /-
Tender Value
Refer document

BOQ Items

Name of Work :Construction of 1 Lakh Litre Sump, Pump Room, Water Supply Arrangements to Aroma nagar Village in Munneerpallam Panchayat ofPalayamkottai Panchayat Union
Sl. No. Item Description
11)Construction of 1 Lakh Litre Sump, Pump Room, Water Supply Arrangements to Aroma nagar Village in Munneerpallam Panchayat ofPalayamkottai Panchayat Union
2Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.
3I Depth (0 to 2 m Below GL)
4II Depth (2 to 3 m Below GL)
5Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.
6Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.
7Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherev
8Beyond 1.50 m & upto 4.50 m below GL
9Upto 1.50 m Below GL
10Upto 4.50 m above GL
11Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle
12For0.00 to 3.30 M (Plane Surface)
13For0.00 to 3.30 M (Curved Surface)
14For0.00 to 3.30 M (FOR ROUND COLUMN)
15For 3.30 M- 4.3 M(Plane Surface)
16For 3.30 M TO 4.30M (Curved Surface)
17Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc,Complete complying with stanard specification.
18Supply,Delivery and fixing of CI Manhole frame with cover of following size including cost of all materials, fixing of MS clamps,Bolt and nuts etc.,complete and as directed by TWAD Board Officers.
19Painting two coats with plastic emulsion paint of approved colour and quality including the cost of paint and labour charges etc., complete complying with the standard specification and as directed by the Departmental Officers
20Refilling the foundation with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification and as directed by TWAD Board Officers.
21Sub Estimate: Construction of Pumproom near 1Lakh Litre Sump
22Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.
23Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.
24Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.
25Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.
26Random Rubble Masonry in cement Mortar 1 : 5 for foundation and basement using New Stones including necessary provision for Bond stones with simultaneous flush pointing with the same mortar above ground level complying with standard specifications.
27Brick work in CM 1:5mix using country bricks ground moulded of size 23 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.
28For Foundation and Basement & Steps
29For Super Structure
30Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherev For superstructure in ground floor
31Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle
32Plastering with CM 1:5,12mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.
33Plastering with CM 1:3,10mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.
34Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1 : 2 : 4 mix using 10-12mm ISSHBG metal and the top rubed smooth etc., complete complying with standard specification as directed. i. 20mm thick for Reside
35Fabrication and supply of Mild Steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutterframe made of 25x25x5 mm M.S anglefor horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. MS door 0.90 X 2.00 m sigle leaf
36Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc,Complete complying with stanard specification.
37Painting two coats with plastic emulsion paint of approved colour and quality including the cost of paint and labour charges etc., complete complying with the standard specification and as directed by the Departmental Officers
38Finishing the top of the roof with one course of Machine PressedTiles of size 20 cm x 2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement use
39Sub Estimate: Providing Electrification and Supply, Delivery, Erection of Submersible Pumpsets in the Sump
40Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP , Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. (200lpm x 50m head)
41Supply and delivery of direct online starter confirming to IS13947 and IEC60947-1 suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).
42Supply and Delivery of 1.1 kV grade, 3 Core PVC insulated PVC sheathed, armoured Aluminium Conductor Cable of Size 6 sq.mm with ISI marking conforming to IS 1554 of reputed make to be laid connecting Isolator and Starter
43Supply, Delivery and Fixing in position of 65 mm dia GI Pipe B Class
44Supply, Delivery and Fixing in position of 32 mm dia GI Pipe B Class (For Cable Encasing)
45Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
46Wiringwith2x1.5sq.mm.(22/0.3)PVCinsulatedSCunsheathedcopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessoriesandwithTWswitchboxan5AFTswitchwithpainting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil)(SD 18)
47Wiringwith2x1.5sq.mm(22/0.3)PVCinsulatedSCunsheathedcopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessorieswith150x100x113mmTWsitchboxfor5A3pinnoninterlockingWallsocketwith5Aflushtypeswitchwithpaintingofsuitablecolourwithcontinuousearth wire connection of 14 SWG TC wire for open PVC plug point (SD 36)
48Supplyandfixingofsingleboxtype4"40WfluorescentfittingcompletewithcopperchokeandcondensorwithTW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting (SD 88)
49SupplyandfixingofWTbulkheadfittingwithguard(Philips/Bajaj/Crompton/K-Lite)suitablefor11WCFLlamp with CFL (SD 83)
50Supply and fixing of fancy glass shade and 11W CFL for BH point (SD 80)
51Supply and fixing of 32A Dpswitch of 500V with metal clad with fuse and neutral(sidehandle) on suitable TW board with earth connection only (SD 144)
52Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3Nos. 32A fuse unit (500V) 32A neutral link and earth link (1"x1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thickan either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EBmeter to fuse unit (SD 127)
53Supply and run of 4 of 4sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class "B") bent at both ends with necessary angle iron up right and end supports for mains (SD 72)
54Supply and run of 4 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on7 / 20 GI bearer wire for service connection mains (SD 67)
55GST Amount for providing Service to Government Contract Works for the above RENEWALWorks. { GST Amount is the Total GST Amount for overall quoted amountabove this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail