Supply, Erection And Commissioning Of V.T. Pumps, Motors, Starter Panel And Delivery Pipes Etc. At Various Flood Prone Sites In W / S Mech. Sub Division, Jind , Supply, Erection And Commissioning Of Axial / Mixed Flow, Water Lubricated, Vertical Turbine Pump, Having Discharge Capacity Of 10 Cus With Lift 15 Ft. With Y-Body Along With Bend With 12’ Column Length Operating At Speed Of 1440 Rpm Including Bends With Support 8Mm Thickness With Bituminous Based Paint Including Both Sides Flanges Welded, H.T. Nut And Bolt Completeand Complete In All Respects As Per Technical Specification Approved By I & Wrd Haryana. , Supply Of 50 Hp, 415 Volt ( _+ 10% ) 50Hz ( +_3% ) , 1440 Rpm , 4 Pole Iei Tefc Continuous Duty Vertical Flanged Mounted Solid Shaft Squirrel Cage Induction Motor As Per Technical Specification Approved By I & Wr Department , Haryana , Supply, Erection And Commissioning Of ?Ccb Of Capacity Of 200 Amp. With 50 Hp Fully Automatic Star Delta Starter With Ats Including All Accessories Having 01 No. Incomer Of Mccb 200 Amp. And Mccb / Mcb Of Sufficient Capacity Of Light Load , Star, Delta And Main Contactors Of Sufficient Capacity, Indicators, Relay, Voltmeter, Power Factor Meter, Push Button, Relay, Button , Thimble Meters Lugs Etc. In All Respect With A Mms Channel ( 1 Feetup From Floor ) With Latest Amendment Suitable For 10 Cus Vt Pump All Allied Accessories With Compatible Cable Upto Motor For V.T. Pump Of 10 Cus Capacity As Per Specification Approved By Department , Supply, Erection And Commissioning Of M.S. Delivery Pipe 341.4 Mm Inner Dia. ( In Approximate 6 Mtr. Length Each Pipe ) And Each Pipe End Welded With Flanges Made Of Thickness 6Mm”Ms Plate As Per Approved Specification And Made Including Ht Nut & Bolt , Rubber Sheet And Other Fitment Accessories Requiredalong With Required. , Supply, Erection And Commissioning Of Axial / Mixed Flow, Water Lubricated, Vertical Turbine Pump , Having Discharge Capacity Of 05 Cs With Lift 15 Ft. With Y-Body Along With Bend, Operating At Speed Of 1440 Rpm Including Bends With Support 8Mm Thickness With Bituminous Based Paint Including Both Sides Flanges Welded, H.T. Nut And Bolt Completeand Complete In All Respects As Per Technical Specification Approved By I & Wrd Haryana. , Supply Of 30Hp Motor , 415 Volt ( +-10% ) , 50Hz ( +-3% ) , 1440Rpm, 4Pole Ie2, Tefc, Continious Duty Vertical Flange Mounted Solid Shaft Squirrel Cage Induction Motor As Per Technical Specification Approved By I & Wrd Haryana. , Providing And Commissioningof 30Hp Fully Automatic Star Delta Starter With 150 Ampere Mccb , Contractors, Microcontroller Based Protection Relay , Ct’S With All Allied Accessories With Complete Cable Upto Motor For The Vt Pump Of 05 Cs Capacity As Per Technical Specification Approved By I & Wrd Haryana. , Supply Erection And Commissioning Of Ms Delivery Pipe 258.9Mm Inner ( In Approx 6 Mtr Per Pipe ) And Each Pipe Of 6 Mm Thickness Both Ends Weldedwith Flangemade Ms Plateand Ht Nut & Bolt , Rubber Sheet 1 / 8” & Other Fitment Accessory Required. , 6214-Znr Steel Cage Fag / Skf / Koyo
