Tender For Supply Of Spare Material For Msdac As Per Annexure -I Attached And Installation Of Msdac (03 Dp) As Per Annexure - I Attached, lucknow-Uttar Pradesh

Supply Of Double Rail Contact Assembly ( Web Detector ) Consisting Of 01 No. Of Tx Coil And 01 No . Rx Coil With Track Side Ejb ( Field Unit ) Complete With Cards And Couplers Suitable For Msdac As Per Rdso Specification No. Rdso / Spn / 176 / 2013 ( Rdso Inspection ) [ Warranty Period: 30 Months After The Date Of Delivery ] Sse / Re / Sig / Lko ( Anil Kumar Uttar Pradesh 3.00 Set , Deflector Plates And Hardware For Cel Makes Hassdac Track Device ( 02 No. Tx & 02 No. Of Rx ) As Per Rdso Specification No. Rdso / Spn / 177 / 2012 ( Ver. 3 ) Or Latest ( , Surge Arrestor For Multi Section Digital Axle Counter ( Msdac ) As Per Rdso Specification No. Rdso Specn. No. Rdso / Spn / 176 / 2013 Or Latest ( Consignee Inspection Only ) [ Warranty Period: 30 Months After The Date Of Delivery ] , Power & Data Coupling Unit ( Pdcu ) For Multi Section Digital Axle Counter ( Msdac ) As Per Rdso Specification No. Rdso Specn. No. Rdso / Spn / 176 / 2013 Or Latest ( , 10 Pin Connector For Evaluator Of Multi Section Digital Axle Counter ( Msdac ) As Per Rdso Specification No. Rdso Specn. No. Rdso / Spn / 176 / 2013 Or Latest ( , Filter Card For Multi Section Digital Axle Counter ( Msdac ) As Per Rdso Specification No. Rdso Specn. No. Rdso / Spn / 176 / 2013 Or Latest ( , Surge Voltage Protection Device For Power Line Of Central Evaluator Of Multi Section Digital Axle Counter ( Msdac ) As Per Rdso Specification No. Rdso Specn. No. Rdso / Spn / 176 / 2013 Or Latest ( , Back Plate Assembly For Connection Of Em08 & Relay Driver Cards Of Central Evaluator Unit Of Multi Section Digital Axle Counter Systems As Per Rdso Specn. No. Rdso / Spn / 176 / 2013 Ver. 3 Or Latest ( , Installation Of Msdac Which Include Central Evaluator Of Axel Counter Wiring From Ct Rack To Central Evaluator Installation And Wiring Of Reset Box, Lv Box And Associated Power Supply Wiring. This Include The Supply Of Shielded Cable Required Conductor Size And Power Supply Cable. The Power Supply Wiring Cable Should Not Be Less Than 10 Sq. Mm Pvc Wire From Power Room To Central Evaluator Earthing As Per Oem Guidelines And Specification With Their Own Material . This Also Include Painting And Writing Work On Evaluator An Other Concerning Location As Per Site Requirement. [ Warranty Period: 30 Months After The Date Of Delivery ] Sse / Re / Sig / Lko ( Anil Kumar Uttar Pradesh 1.00 Set , Installation Of Track Device / Double Rail Contact Unit Of Entry Or Exit With Conductor All Material Including Drilling Of Required Size Holes On Rail For Fixing These Taking The Cable Lead Through Anti- Rodent, Anti- Oxidant & Non - Flame Propagating Type Double Walled Coorrugated ( Dwc ) Pipe As Per Isi4930 Part I Or Ii Or Latest From Track Device To Location Box And Terminating It On Terminals Including Digging Of Trench Under Track And Upto Location / Track Side Unit And All Other Accessories As Per Site Requirement For Laying Of Transmitter And Reciever Cable With Suitable Wire Embeded Rubber Pipe With Clamp For Protecting These Cable At Dp End. This Also Include Earthing Of The Track Device Through Maintainance Free Earth, If Required By The System Design. [ Warranty Period: 30 Months After The Date Of Delivery ] Sse / Re / Sig / Lko ( Anil Kumar Uttar Pradesh 1.00 Set

Refer document

Refer document

Refer document