Tender For New Construction Of Day Care Primary Health Center Building At Komanda Under Odagaon Block, Nayagarh For The Year- 2022-23
Tender Value
80.89 Lakhs
Estimated cost
Bid Submission
07 Apr 2023
0 days left
EMD
80895
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
odagaon → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
New Construction Of Day Care Primary Health Center Building At Komanda Under Odagaon Block, Nayagarh For The Year- 2022-23
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Mar-2023 | Class of Contractors | Technical Bid | 07-Apr-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | (A) CIVIL |
| 2 | Earthwork in excavation of foundation in all kinds of soil includingdressing and levelling the bed up to the required depth & removing the excavated earth & depositing the same away from the work site within initial lead of 50 mtr & initial lift of 1.5 mtr, including cost of labour including cess andT&P articles required for the work including shoring, shuttering, propping & dewatering if required, etc. complete in all respect as per the specification & direction of the Engineer-in-Charge.(Ground Floor) |
| 3 | Boundary wall |
| 4 | CC Road |
| 5 | RCC Gate and Cow Catcher |
| 6 | Filling Foundation & Plinth manually with excavated earth including all labours, watering etc., required for the work including cost, conveyance, royalty and taxes for finished item of works including cess andand direction of the Engineer-in-charges.(Ground Floor) |
| 7 | Boundary wall |
| 8 | CC Road |
| 9 | RCC Gate and Cow Catcher |
| 10 | Cement Concrete (1:4:8) using 40mmsize hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. (RCC Gate & Cow Catcher) |
| 11 | Cement Concrete (1:3:6) using 40mmsize hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 12 | Boundary wall |
| 13 | CC Road |
| 14 | Cement Concrete (1:2:4) using 12mmsize hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. (C C Road) |
| 15 | Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials,bitumen and cement proprtion(3:1) including cleaning before pouring 12mm to 25mm and 15cm depth.(C.C Road) |
| 16 | Construction of Embankment with approved materials obtained from borrow pits with all lead and lifts,tranporting to site by mechanical means within a lead of 5 Km speading,grading to required slope compacting of table 300-2 & Clause 305 of MoSRT & H Specification for Road & Bridge works(4th Revision)( C C Road) |
| 17 | CC work M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 20 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centring and shuttering and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper |
| 18 | Ground Floor |
| 19 | A)COLUMN BASE FOOTING |
| 20 | B)COLUMN SUPER STRUCTURE |
| 21 | C) PLINTH BAND |
| 22 | D) LINTEL BAND |
| 23 | E)FLOOR BEAM |
| 24 | F) CHAJJA |
| 25 | G) STAIRCASE 2 |
| 26 | H) ROOF SLAB |
| 27 | First Floor |
| 28 | B)COLUMN SUPER STRUCTURE |
| 29 | E)Roof BEAM |
| 30 | H) ROOF SLAB |
| 31 | A)COLUMN BASE FOOTING (Boundary Wall) |
| 32 | B)COLUMN SUPER STRUCTURE (Boundary Wall) |
| 33 | C) PLINTH BAND (Boundary Wall) |
| 34 | Top Copping (Boundary Wall) |
| 35 | RCC Gate |
| 36 | Cutting, straightening coiled or bent up M.S. rods, HYSD steel or Tor Steel ofgrade Fe-415 confirming to I.S.-1786 - 1985welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods, HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod, HYSD steel or Tor steel consumed in the work and no separate payment will be made towards weight of binding wires ,lapping and wastage of HYSD Steel or Tor Steel ,which is to be borne by the contractor at his own cost). |
| 37 | Ground Floor |
| 38 | First Floor |
| 39 | Boundary wall |
| 40 | RCC Gate and Cow Catcher |
| 41 | Laterite stone masonary in cement mortor (1:6) with approved grade cement and screened & washed sand for mortar after immersing the stone for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, Laterite stone masonry in cement mortar (1:6)in foundation and plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc |
| 42 | A) Foundation |
| 43 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6)including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 44 | Ground Floor(Super Structure) |
| 45 | 1st Floor(Super Structure) |
| 46 | Boundary wall (Foundation) |
| 47 | Boundary wall (Super Structure) |
| 48 | RCC Gate and Cow Catcher |
| 49 | Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. |
| 50 | Ground Floor |
| 51 | 1st Floor |
| 52 | Boundary Wall |
| 53 | RCC Gate and Cow Catcher |
| 54 | Fixing Granite tiles in dados and skirtingand risers of steps on 12 mm thick bed of cement mortar 1:3, 1 cement : 3 sand jointed with neat cement slurry mixed with pigmant to match the shades ofthe tiles including rubbing and polishing complete including cost of tiles and all materials etc. complete. (RCC Gate and Cow Catcher) |
| 55 | Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. |
| 56 | Ground Floor |
| 57 | 1st Floor |
| 58 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royaltyof all materials, cost of all labour,etc complete as per the direction ofE.I.C.Ref(A/R-2006,P-103,Item no-27 |
| 59 | Ground Floor |
| 60 | 1st Floor |
| 61 | Supplying, fitting and fixing Vitrified (600mm x 600mm)tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction ofE.I.C. |
| 62 | Ground Floor |
| 63 | Supplying, fitting and fixing Granaite tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction ofE.I.C. |
| 64 | Ground Floor |
| 65 | Fixing Vitrifird tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
| 66 | Ground Floor |
| 67 | Priming 1 coat with wallprimer water bond cement primer including all labour, materials etc. complete. |
| 68 | Ground Floor |
| 69 | 1st Floor |
| 70 | 16mm |
| 71 | Boundary Wall |
| 72 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. |
| 73 | Ground Floor |
| 74 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 75 | Ground Floor |
| 76 | 1st Floor |
| 77 | Wall painting two coat with any approved weather coat paintincluding cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
| 78 | Ground Floor |
| 79 | 1st Floor |
| 80 | Boundary Wall |
| 81 | RCC Gate and Cow Catcher |
| 82 | Providing, fitting & fixing of M.S. J sectionISMB 100 including of all cost, conveyance etc all complete (RCC Gate and Cow Catcher) |
| 83 | Providing, fitting & fixing of G.I. Pipes of 100mm dia including of all cost, conveyance etc all complete.(RCC Gate and Cow Catcher) |
| 84 | Providing, fitting & fixing of M.S. Flat including of all cost, conveyance etc all complete.(RCC Gate and Cow Catcher) |
| 85 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheetetc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. |
| 86 | Ground Floor D |
| 87 | Ground Floor W |
| 88 | 1st Floor D |
| 89 | RCC Gate and Cow Catcher |
| 90 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. |
| 91 | Ground Floor |
| 92 | Providing and Fixing 30mm thick flush Door shutters conforming to IS:2002 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross band and face veneers on both face of shutters inclusive of 4 Nos of Stainless steel Butt Hings (100mm x 60mm x 2.5mm) 40mm stainless steel screws. Cylindrical Lock(Godrej-9843), Tower Bolt SS 10x300mm(Bathroom) (Godrej 3264),PVC Door Buffer with SS Screw, teak wood lipping around the edges & paste with 1.5mm thick laminate on both side of the flush door, etc.including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc,complete as per the direction of engineer-in-charge. |
| 93 | Ground Floor |
| 94 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) (FENESTAI Three Track - Three Panel sliding window- 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 25 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners. silicon rubber sealant. easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards .As per specification approved by the Department & as per derection of the E.I.C . SE No 16100 dt 05/05/2020 . |
| 95 | Ground Floor |
| 96 | Painting two coats with approved enamel paints of approved colour, shade over a coat ofprimer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C. |
| 97 | Ground Floor |
| 98 | 1st Floor |
| 99 | 25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete. |
| 100 | Ground Floor |
| 101 | 1st Floor |
| 102 | (A) ELECTRICAL |
| 103 | Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in recessed non-metalic PVC flexible conduit with piano type switch, phenolic laminated sheet, suitable size M.S Box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.Group A |
| 104 | Group B |
| 105 | Group C |
| 106 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR insulated copper conductor, single core cable in non-metalic heavy duty flexible conduit as required.2X1.5 sqmm+1X1.5 sqmm earth wire |
| 107 | 2X2.5 sqmm + 1X1.5 sqmm earth wire |
| 108 | 2 x 4 sq.mm + 1 x 1.5 sq.mm earth wire |
| 109 | 2 x 6 sq.mm+ 1 x 2.5 sq.mm earth wire |
| 110 | Supply and fixing of 6Amp plugwith 6Amp switch on existing board. (Modulartype) |
| 111 | Recessed wiringfor 5 / 6 amp socket outletwith6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on same switch board as per direction of Engineer-in-charge. |
| 112 | Supply & fixing of 16 Amp. Clip-in-type Modular Plug Board with 16 Amp. Switch |
| 113 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR)12wayDouble door DB BOX. |
| 114 | Supply and fixing of 5 amp to 32 amp rating 240 V \"C\" series miniature circuit breaker suitable for inductive loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.6 to 32 SP MCB |
| 115 | 63A DP MCB |
| 116 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required. |
| 117 | Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required. |
| 118 | Supply of LEDtube as per following specification(i) Decorative Slim Linear LED Batten(ii)Polycarbonate Body, Round Profile (iii)Lumens Efficiency: 100 Lumens/Watt(iv)Wattage:18 W(v)Rated input voltage:140 V AC - 270 V AC(vi)Driver Efficiency :90%(vii)Lumens efficiency:100 lm / W(viii)Starting Voltage:90 V(ix)THD:<= 20(x)Length :1.15 m (1150 mm)(xi)Colour Rendering Index (CRI): >80(xii)Colour Temperature: 6500 K(xiii)Life:25000 hours(xiv)Light Effect:Cool Daylight(xv)UV\IR radiation:No Harmful Radiations(xvi)In built surge protection: 2.5 kV(xvii)Isolation:3.75 kV(xviii)Mercury content: Zero Mercury Content(xix) Warranty :1 Year |
| 119 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required. |
| 120 | S/F of 9watt LED Bulb. Make:- Havells/ Crompton/ Greate white/ Philips/ Bajaj/ HPL. |
| 121 | Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan of Havells velocity/ CROMPTRON JURA Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge |
| 122 | Supply of Ceiling Fan as per following specification(i) Fan Style: Basic / Regular(ii)Colour:Brown, Ivory, Opal White(iii)Air Delivery (in m3/Hr): 205(iv)Power Input:75 W(v)Speed:370 RPM(vi)Sweep Size:1200(vii) Warranty :2 Year(viii) 100% Cu. winding(ix) Double Bearing\" |
| 123 | Supply and Fixing of extra down rod 20mm dia for 20cm x 5 |
| 124 | Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etcas required. |
| 125 | Supply of 1.5 Ton 3 star rated inverter model spilit type AC Machine ( make-Carrier/Daikin/Equivalent) |
| 126 | Supply of of 4 kva (90 v-280v) voltage stabiliser with all accessories and connections.(Make- V Guard/ Microtek) |
| 127 | Installation Charges (standard) for AC |
| 128 | Providing and fixing of powder coated MS stand suitable for above split type air conditioner for keeping the outdoor unit with the help of dash fasteners etc. complete as required |
| 129 | Providing and fixing of copper refrigerant pipes of 1/4 \"\" sizes of copper tubes complete with nitrile rubber/foam insulation/wrapping the copper pipes and brazing the same at both the ends from condenser to cooling unit etc. complete as reqd. |
| 130 | Providing and fixing of copper refrigerant pipes of 5/8\"\" of copper tubes complete with nitrile rubber/foam insulation/wrapping the copper pipes and brazing the same at both the ends from condenser to cooling unit etc. complete as reqd. |
| 131 | Supplying & laying/ fixing of 3X4 sqmm PVC insulated & PVC round sheathed multi core copper conductor flexible cable along with refrigerant pipe including connections etc.as required. |
| 132 | Providing & fixing of hard drawn threaded wired PVC drain pipe above of 25 mm dia for drain out condensation water etc. as required |
| 133 | Fabricating, providing and fixing of MS angle iron frame cage with made out of 40 x40 x3 mm size MS angle iron for main frame and the whole of frame work shall be covered with 3\" x 1\" size 8 SWG MS wiremesh duly welded with angle iron frame with the help of B4size of 25 x 3 mm MS strip etc. complete with painting, priming etc. for covering the existing STAC outdoor units / flood lights etc fixed on wall / floor with the help of desh washer etc. as reqd. 3.6Sqm per unit |
| 134 | Supply & Fixing of LED street light (Make-Bajaj/Philips /Crompton/ Havells/Wipro/Halonix/Panasonic/PAC)30watt |
| 135 | S/F of 2000 VA inverter with 2 nos 150 Ah Tubular Battery of 4 year warrenty and Trolly (make microtech/ luminous / v-guard/Exide) |
| 136 | (A) P.H |
| 137 | INTERNAL W/S-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I./PVC pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.20mm dia PVC pipesInternal |
| 138 | 25mm dia PVC pipesExternal |
| 139 | Supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking GI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.R.C.C Roof/Chaja |
| 140 | Cutting Groove in wall or floor |
| 141 | Cutting hole(250 mm wall) |
| 142 | Cutting hole(375 mm wall) |
| 143 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings(Jaquar) of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.15mm dia CP Bib CockSB |
| 144 | 15mm dia CP Bib Cock LB |
| 145 | 15mm dia CP Pillar Cock |
| 146 | 15mm dia CP Angle Stop Cock |
| 147 | 15mm dia CP Concealed Stop Cock |
| 148 | 25mm dia Brass Full Way Valve |
| 149 | 25mm dia PVC ball valve |
| 150 | 15mm dia C.P. flange |
| 151 | 15mm dia C.P. extension pipe(nipple) |
| 152 | Supplying all materials, labour T&P and fitting and fixing of C.P Shower(Parryware,Hindware) with 15mm or 20mm inlet with C.P Shower arm including polishingetc all complete as per specification and direction of the E.I.C 15 mm x 150mm dia C.P Shower with arm |
| 153 | INTERNAL S/I-Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing etc all complete as per P.H specification and direction of the E.I.C. 110mm diameter U-PVC SWR pipes |
| 154 | 110mm U-PVC SWR P-trap |
| 155 | 110mm U-PVC SWR Single junction door |
| 156 | 110mm U-PVC SWR door Tee |
| 157 | 110mm U-PVC SWR D/Jn with Door |
| 158 | 110mm U-PVC SWR PlainTee |
| 159 | 110mm U-PVC SWR door bend |
| 160 | 110mm U-PVC SWR Offset |
| 161 | 110mm U-PVC SWR plain bend/Shoe bend |
| 162 | 110mm U-PVC SWR vent cowl |
| 163 | 75 mm diameter U-PVC SWR pipes |
| 164 | 75mm U-PVC SWR single junction |
| 165 | 75 mm U-PVC SWR plain bend |
| 166 | 125 mm dia C.P Grating |
| 167 | Cutting hole for PVC pipein Roof |
| 168 | Cutting hole for PVC pipein Chaja |
| 169 | Supplying all materials, labour, T&P and fixing Anglo Indian water closet withP Trap plainetc all complete as per specification and direction of the E.I.C. (Hindware,Parryware) |
| 170 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Cerra/ Parry ware/ Hindware) |
| 171 | Supplying all materials, labour T&P and fixing wash basins(Hindware,Parryware) with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.WHB |
| 172 | Fixing of Pedestrial for W.H.B |
| 173 | Supplying all materials, labour T&P and fixing wash Lab sink with C.I. or M.S.brackets painted white with 40mm CP waste,40mm PVC waste pipe including cutting holes in walls and making good the damages etc. all complete as per P.H.specification and direction of the E.I.C. |
| 174 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.CB.E. Mirror(600mmx 450 mm) |
| 175 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C20mmx450mm long CP towel rail |
| 176 | CP Towel Ring |
| 177 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C |
| 178 | Supplying all materials labour T&P and fixing standard size shelf with C.P. brass brackets and guard rails complete fixed to wooden plugs with C.P. screws as per direction E.I.C. |
| 179 | Supplying all materials, labour, T&P and fixing of 40mm dia CP Waste as per specification and direction of the E.I.C |
| 180 | Supplying all materials, labour, T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. .Toillet-(1 x 3.00m x 4.20m+1.80mx 2.40m )x0.15m =4.66 cumx2 |
| 181 | Supplying all materials, labour, T&P and providing C.C. (1:4:8) using 4 cm h.g. metal includingwatering,curing,conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.Toillet-(1 x 3.00m x 4.20m+1.80mx 2.40m )x0.15m x2 |
| 182 | Factory made FRP/ALUMINIUM(alternately called GRP) door frame of size 75mmx100mm fabricated using. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. M.S flat hold fast shall be provided with the frame. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the E.I.C5(0.75+2.25+2.25) |
| 183 | Factory made single leaf rigid FRP/ALUMINIUM(alternately called GRP) sandwich composite door shutter of 32mm thick. The thickness of the skins shall not be less than 1.50mm. Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites .The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.5 x (2.25 m x 0.75 ) |
| 184 | Supplying all materials, labour, T&P and providing cement washing 2 coats including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C 58.59sqm x2 |
| 185 | EXTERNAL WATER SUPPLY-125x100mm dia Tube Well through ODEX Method Supplying all labour and drilling perfectly vertical bore holes in boulder formation areas for a specified depth below ground level including supply of necessary casing shoe, odex tools and plants jointing materials, extra sockets where rquired withdrawing of pipes, lowering the M.S (ERW) pipes and fitting and fixing in perfectly verticalposition lowering in over burden boulder formation till encounter of hard rock and to drill 125mm DTH upto the desired depth as may be necessary, clearing the site and washing bore etc., all complete providing sanitary sealing upto 5 meters depth below gound level as per the direction of Engineer-in-charge., - Labour for drilling of 125mm dia bore-00 mtr to 60.00 mtr |
| 186 | Cost of ERW Pipe 61.00m |
| 187 | Labour for drillinga perfectly vertical bore hole of 100 mm dia for a specified depth below boulder zone through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs as requiredto suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consuambles etc. x |
| 188 | Cleaning and developing the tube wells with their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of EIC |
| 189 | Supplying all materisl, labour, T & P and withdrawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition. |
| 190 | Supplying all labour, T&P and materials for fitting and fixing of India Mark-II Deep well Hand Pump with cast Iron cylinder, 12mm/16mm dia B.S. Connecting rod, 32mm dia G.I.Pipe of required lengths with supply of extra socket of approved make all complete including carriage, coveyanceas per direction of Engineer-in-charge. |
| 191 | Supplyingall labour, T&P and materials for Construction of Masonary Platform for Tube wellas per I.S. Specification . all complete including 760mmx760mmx400mm deep cement concrete embeded around the bore well pipe as per direction of Engineer-in-Charge. |
| 192 | Supplying all materials, labour, T&P and construction of 100mm wide waste water drain for India Mark-II Hand Pump platform as per UNICEF design and specification with C.C (1:2;4) using 12mm size hard granite crusher broken chips etc. all complete as per direction of Engineer-in-Charge. |
| 193 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brickwalling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles.etc all complete as per approved specification and direction of the E.I.C.1.20 m diax 2.0 m deep soakway pit |
| 194 | INSTALLATION PUMP SET-Supplying and fitting & fixing ofI.S.I make 1.00 H.P single phase Submersible Pump set to give discharge of3000 ltr/hour at a head of 40 mtr etc all complete as direction of EIC.(1 standby) |
| 195 | Supplying and fitting & fixing ofD.O.L starter for 1.0 H.P single phase Submersible Pump etc all complete as per direction of Engineer-in-charge. |
| 196 | Supplying and fitting & fixing ofStabilizer 5 KVA for 1.0 H.P single phase Submersible Pump etc all complete as per direction of Engineer-in-charge. |
| 197 | Supplying and fitting & fixing of suitable cable and connecting the pump and starter etc all complete as per direction of Engineer-in-charge. |
| 198 | Supplying and fitting & fixing of Plastic rope, M.S well cover, M.S clamp,etc all complete as per direction of Engineer-in-charge. |
| 199 | Supplying and fitting & fixing of HDPE pipes and pipe fittings with C.P Nippling and lowering to bore well, making connection to pumpset & testing etc all complete as per specification and the direction of the E.I.C.32 mm dia HDPE Pipe |
| 200 | 32mm dia steel short piece |
| 201 | Iron Box |
| 202 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr aboveG.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.2000 lits capacity on the roof of GF |
| 203 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.2000 lits capacity on the roof of GF |
| 204 | EXTERNAL S/D-30 user ,Earthwork in all kinds of soil in excavation of foundation trencheswithin 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.Initial lift upto 1.5 mtr ,4.36 m x 3.17 m x 1.50 |
| 205 | From 1.5 mtr to 3.0 mtr depth, 4.36 m x 3.17 m x 0.70 m |
| 206 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.4.36 m x 3.17 m x 0.15 m |
| 207 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.4.36 m x 3.17 m x 0.15 m |
| 208 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.4.36 m x 3.17 m x 0.10 m=1.382 cum+3.12 m x 1.93 m x 0.038 m = 0.228 Cum |
| 209 | Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2with dimensional tolerence of +/- 8% in C.Mincluding watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.In Foundation and Plinth in C:M (1:4), 2 x ( 4.06 + 1.93 ) m x 0.47 m x 1.10 m = 6.193 cum+ 2 x ( 3.82 + 1.93 ) m x 0.35 m x 0.80 m = 3.220 cum |
| 210 | In Foundation and Plinth in C:M (1:6)1 x 0.40 m x 0.40 m x 0.60 m |
| 211 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.12 mm thick C.P in C:M (1:3),2 x ( 3.12 + 1.93 ) m x 1.90 m =19.19 sqm+3.12 x 1.93 m =6.021 sqm+4 x 0.40 x 0.60 m =0.96 sqm |
| 212 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.2 x ( 3.12 + 1.93 ) m x 1.90 m =19.19 sqm+3.12 x 1.93 m =6.021 sqm x 2Nos |
| 213 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. 2 x (3.82 + 2.63 ) m x 0.125 m=1.612 sqm+3.12 x 1.93 m =6.021 sqm |
| 214 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. |
| 215 | Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 3.82 m x 2.63 m x 0.125 mx 2Nos |
| 216 | Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded inC.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 217 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C.bafflewall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.2.2 m x 0.45 m |
| 218 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded inP.C.C(1:1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. x 2Nos |
| 219 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works includingwatering curring and conveyance of all materialsto work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. 2 x ( 4.06 + 2.87 ) m x 1.10 m= 15.246 Sqm+2 x ( 3.82 + 2.63 ) m x 0.80 m = 10.32 Sqm+2 x ( 4.06 + 2.63 ) m x 0.125 m = 1.672 Sqm |
| 220 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth includingwatering, ramming etc all complete as per direction of the E.I.C. |
| 221 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. |
| 222 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes withcement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover,etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm |
| 223 | Addl.depth |
| 224 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brickwalling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles.etc all complete as per approved specification and direction of the E.I.C.1.20 m diax 2.0 m deep soakway pit |
| 225 | Supplying all materials, labour, T&P and laying in trenches U-PVC SWR/4Kg/cm2 soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and providing bed concrete in P:C:C (1:4:8) using 40 mm size metal and haunch top the pipe with refilling of trenches etc all complete as per P.H specification and direction of the E.I.C. |
| 226 | Supplying all materials, labour, T&P and laying in trenches U-PVC SWR/4kg/cm2 soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approvedsolvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches andall round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal,etc. all complete as per approved drawing, specification and direction of the E.I.C. |
| 227 | Supplying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mmincluding earthwork in excavationof trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C. |
AI Tender Summary
Tender Timeline
Mar 29, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 07, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 07, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender