Military Engineer Services-MES has published Tender For Repairs To Flooring,Plumbing And Sanitary Fittings In High Rise Building At 104 Area Under Age Br I Of Gend Visakhapatnam. Submission Date for this Tender is 20-04-2023. Plumbing and Sanitary Work Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-04-2023 |
| Sl. No. | Item Description |
| 1 | The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i]The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii]The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii]Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv]The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- The work is to be carried out in multistoried buildings of height upto 12 floors ,Tenderers/bidders are advised to vist the site and see the location and height of buildings etc and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage. |
| 2 | M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks including demolition of old brick work complete all as specified and directed. |
| 3 | Taking down cement plaster onbrick work, racking out joints, hacking for key scrubbing down with water etc complete and removing outside MD land complete all as specified and directed . |
| 4 | M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces finished even and smooth with out using extra cement complete all as specified anddirected. |
| 5 | M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. |
| 6 | M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces mixed with and including cement water proofing compound @ 3% by weight of cement finished even and smooth with out using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid seperately |
| 7 | Supply only Water proofing compound of approved make complete all as specified and directed |
| 8 | M&L for preparing old plastered or unplastered surfaces of ceiling by using vaccume basedhand held or long handle sander machine and applying one coat of white wash by using auto roller, complete all as specified and directed |
| 9 | M & Lfor preparing old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint by using auto roller or airless sprayer machine complete all asspecifiedand directed |
| 10 | M & Lfor preparing old painted steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint by using auto roller or airless sprayer machinecomplete all asspecifiedand directed |
| 11 | prepration of newly plastered wall surfacesby using vaccume basedhand held or long handle sander machine and applying two coats ofdistemper oil emulsion (Oil bound washable distemper)over a Primer by using auto roller or airless sprayer machine complete all as specified and directed. |
| 12 | M & L for Preparing old plasteredsurfaces of walls by using vaccume basedhand held or long handle sander machineand applying one coat of distemper oil emulsion by using auto roller or airless sprayer machine complete all as specifiedand directed |
| 13 | Prepration ofnewly plastered surfaces of walls by using vaccume basedhand held or long handle sander machine and cleaning the surfaces by using Jet washerand applyingtwo coats of cement based paint by using auto roller or airless sprayer machine over a coat of primer complete all as specified and directed |
| 14 | prepration of newly plastered wall surfacesby using vaccume basedhand held or long handle sander machine and applying two coats ofdistemper oil emulsion (Oil bound washable distemper)over a Coat of chalk whitening by using auto roller or airless sprayer machine complete all as specified and directed. |
| 15 | prepration of newly plastered ceilingsurfacesby using vaccume basedhand held or long handle sander machine and applying two coats of white wash by using auto roller, complete all as specified and directed |
| 16 | Complete removal of existing treatment on walls and prepration of surfaceby using vaccume basedhand held or long handle sander machine and cleaning the surfaces by using Jet washerand applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of exterior weather proof (100% acryllic paint) by using auto roller or airless sprayer machine over a coat of primer complete all as specified and directed |
| 17 | Repair to leakage of bib taps,pillarcock,stop cock, PVC connection, waste pipes, anglevalve, concealed valve, GI union jointsof GI pipe andRe-fixingof bottle trapetc bychanging the washers, spindles or any other minor accessories complete all as specified and directed |
| 18 | S&F in repairs 15 mm Bib tap Fancy type of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) or forbrass ferrulewith check nut complete all as specified and directed |
| 19 | S&F in repairs 15 mm Bib tap long body of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) or forbrass ferrulewith check nut complete all as specified and directed |
| 20 | S & F in repairs 15 mm bore fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. |
| 21 | S & F in repairs 15mm dia Pillar tap, fancy type chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 22 | S&Fin repairs Brass chromium plated shower rose 125mm sizewith or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed |
| 23 | S & F in repairs 15mm dia fancy type, chromium plated angle/Stop valve, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed. |
| 24 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 25 | S & F in repairs fancy type Chromium plated two way bib taps, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule with flanges complete all as specified and directed. |
| 26 | S&F in repairs PTMT flush handlewith adjustable lever and hook for low level flushing cisterncomplete all as specified and directed. |
| 27 | S & F in repairs 50mm dia Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 28 | S & F in repairs 20mm dia Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 29 | S & F in repairs 25mm dia Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 30 | Rectifying the blockage of water / air gaps in GI tubing 15/20mm bore for receiving clear water from the taps including taking down and refixing of taps / valaves / pipes as required at site, cleaning the same and refixing in position complete all as directed. [Note: The item has to be operated as per no water supply complaints and rectification of one complaint shall be measured as one job] |
| 31 | S & F in repairs PVC flexible pipe 32mm / 40mm bore with socket of 600mm long for wash basins / sinks complete all as directed |
| 32 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as directed. |
| 33 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed. |
| 34 | S & F in repairs 32mm bore PTMT waste coupling half or full threaded) (Min weight-45 grams) complete all as specified and directed. |
| 35 | S & F in repairs 40 mm bore PTMT waste coupling half or full threaded) (Min weight-60 grams) complete all as specified and directed. |
| 36 | S & F in repairs PTMT grating 100mm dia complete all as directed |
| 37 | S & F in repairs PTMT grating 125mm dia with waste hole complete all as directed |
| 38 | S & F 110mm bore PVC (SWR) soil, waste and vent pipes, Single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. |
| 39 | S & F in repairs PVCbends110mm dia complete all as specified and directed |
| 40 | S & F in repairs PVC 110mm dia junction single(single T) equal or unequalcomplete all as specified and directed |
| 41 | S & F75 mm bore PVC (SWR) soil, waste and vent pipes, Single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. |
| 42 | S & F in repairs PVCbends75mm dia complete all as specified and directed. |
| 43 | S & F in repairs PVC 75 mm dia junction single(single T) equal or unequalcomplete all as specified and directed |
| 44 | M & L for rectifying the leakages in soil, waste and rain water pipes of 110 / 75 mm dia by cutting around existing pipe in brick work upto depth of pipe joint and replacing the defective "T" joint including making good the damged brick wall in PCC 1:2:4 or CM 1:3 as per site requirement duly mixed with and including water proofing compound and finishing the surfaces to match with adjoining wall surfaces to the entire satisfaction of the Engineer-in-Charge. |
| 45 | S&F in repairs plastic WC seat cover of any colour pedestal pattern , closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging devices complete all as specified |
| 46 | S&F in repairs 15mm dia fancy type, chromium plated with long shank and cup (concealed type)Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed. |
| 47 | S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipecomplete all as specified and directed. |
| 48 | S&F in repairs small GI fittings15 mmsuch assocket ,tee elbow, nipple 75mm long ,union andreducer 20x15mm /reducer 20x25mm,tee of unequal size/ Elbow etc (as requiredat site)complete all as specified and directed |
| 49 | S&F in repairs small GI fittings20 mmsuch assocket ,tee elbow, nipple 75mm long ,union andreducer 20x15mm /reducer 20x25mm,tee of unequal size/ Elbow etc (as requiredat site) all as specified and directed |
| 50 | S&F in repairs 15 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipecomplete all as specified and directed. |
| 51 | S&F in repairs Sink with drainage board made of stainless steel 1 mm thick (SS-304) kitchen or laboratorywith plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or includingfixingcantilever brackets and connecting union to pipe overall size 915 mm x 460 mmbowl size 410 mmx 330 mm x 160 mm complete all specified and directed |
| 52 | S & F in repairs bevelled edge looking mirror of selected quality glass, of size 600 x 450 x 5.5mm thick mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium beading alroundcomplete all as specified and directed. |
| 53 | M&L for Cleaning RCC water tanks of 10000 to 15000 litres capacity byDraining out water upto bottom surface and removing the complete silt sediment , sludge from the tank and and cleaning with bleaching powder after scrabing the walls and bottom of the tank completely using wire brush and applying one coat of white wash using smart painting method on entire tank externally as well as internally and writing details like cleaning date/ due date/ tank capacity with synthetic enamel paint complete all as directed by the Engineer in charge. Note: (i) Quoted rate shall deemed to be included for writing details of "Tank cleaned on ______ (date)" with height of each letter not less than 10 cm (ii)An register shall be maintained by the Engineer-in-charge to obtain the signatures of users in token of completion of cleaning ofeach water tankand the sameshall be kept in record , and shall be produced alongside RAR/FB at the time of payment. |
| 54 | S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting grooves and making good in CM (1:3) or PCC (1:2:4) for concealed tubingincluding taking down old GI tubing 15mm dia complete all as specified and directed |
| 55 | S&F 20mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting grooves and making good in CM (1:3) or PCC (1:2:4) for concealed tubingincluding taking down old GI tubing 20mm dia complete all as specified and directed |
| 56 | S & F in repairs MS brackets of 350 mm long made of angle iron of size 35x35x5mm bent to shape as required including necessary fixing arrangements as in supports for wash basins / sinks and making good to the disturnbed surfaces including applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and directed |
| 57 | Removal of existing sunken floor treatment including taking out of cement plaster and preparation of surfaces with wire brushes, cleaning with water and applying epoxy treatment with Two coats of NITOBOND chemical or equivalent from list of makesto bottom and sides as per manufacturers instructionsand providing 10mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by weight of cement to cover entire portion of epoxy coating including testing the sunken floor for 48 hours duly filled with water complete all as per manufacturers instructions and as directed by the Engineer-in-Charge. [Note: The work shall be executed by authorised Applicator of the chemical Manufacturer and contractor will have to submit all necessary documents for the same] |
| 58 | M & L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete as in sunken floors including demolition of old concrete complete all as specified. [Notes: Quoted rate is inclusive for (i) Demolition of WC, traps, sanitary connectionsand removing all debris outside defence land. (ii) Sealing the gaps / joints between WC and flooring, joints of nahani trap & connecting pipes with sealent as recommended by the manufacturer |
| 59 | S & F in repairs Vitreous china Squatting Pan, white, "Orissa" pattern, of size 580 x 440mm, with integral foot rests including cast iron "P" or "S" trap and provision of cement concrete bedding and making good the disturbed surfaces to match with existing flooring complete all as directed. |
| 60 | S & F in repairs Wash down water closet (Pedestal pattern), Vitreous China white, plastic water closet seat of same colour closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 61 | S & F in repairs Vitreous china wash basin, white flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand including 32mm bore PTMT waste coupling, PVC waste pipe and connection with check nuts complete all as specified and directed. |
| 62 | S&F in repairs low level flushing cistern 10 ltrs capacity, valveless, syphonic action type with inlet, ball valve, float and handle, body moulded from virgin quality high impact poly propoliyoneincluding brackets and 32 mm diaPVC flush pipe for low level flush cisterncomplete all as specified and directed. |
| 63 | M & L for coloured joint free Non skid Ceramic tiles ofarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm of 7 to 8 mm thick in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. |
| 64 | M & L for coloured joint free Non skid Ceramic tiles ofarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm of 7 to 8 mm thick in vertical surfaces such as skirtings / dadoset and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick backing coat in CM 1:3including dismantling existing tiles complete all as specified and directed. |
| 65 | M & L for coloured joint free Non skid Ceramic tiles ofarea of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm of 7 to 8 mm thick in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. |
| 66 | M&L for coloured glazedceramic tiles of size 350 x 450 x 7 to 9 mm thick on vertical surfaces such as skirtings, dados and risers for steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backingof 10mm thick in cement mortar 1:4 including dismantling of old tiles complete all as specified and directed |
| 67 | M&L for coloured designed chequered cement concrete tiles of size not less than 20cmX20cmand 22 to 25 mm thick with mixture of white & grey cement in equal proportionsand no pigment as in floorsetc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding screed bed of 15mm thick in cement mortar 1:6including dismantling of old tiles complete all as specified and directed. |
| 68 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated / "Z" profile steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling existing sheeting complete all as specified and directed. |
| 69 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling existing sheeting complete all as specified and directed. |
| 70 | M & L for providing and injecting chemical emulsion for post construction anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at 2.25 litres per linear running metre including drilling and plugging holes with cement mortar (1:2) to match with the existing surface complete all as specified and directed by Engineer-in-Charge. |
| 71 | M & L for providing and injecting chemical emulsion for post construction anti-termite treatment at points of contact of wood work by chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at the rate of 0.5 litre per each hole by drilling 6mm dia holes at a downward angle of 45 Degree at 150mm centre to centre complete all as specified and directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
