}

Work For Construction Of 11 Kv/Lt Line In Business Plan For Area Expansion Of Nagar Panchayat Sadabad In The Area Of Edd Iv Sadabad., hathras-Uttar Pradesh

Dakshinanchal Vidyut Vitran Nigam Limited has published Work For Construction Of 11 Kv/Lt Line In Business Plan For Area Expansion Of Nagar Panchayat Sadabad In The Area Of Edd Iv Sadabad.. Submission Date for this Tender is 02-04-2023. Civil Work Tenders in hathras Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

36949390
Corrigendum : Work For Construction Of 11 Kv/Lt Line In Business Plan For Area Expansion Of Nagar Panchayat Sadabad In The Area Of Edd Iv Sadabad.
Tender
Indian
Uttar Pradesh
Hathras
02-04-2023

Tender Details

Work For Construction Of 11 Kv / Lt Line In Business Plan For Area Expansion Of Nagar Panchayat Sadabad In The Area Of Edd Iv Sadabad.-2 Pcc 8.5 Mtrlong 3 Stp Pole 11M Long 4 Stone Pad 5 Acsr Dog Conductor 6 11 Kv Xlpe Cable 3X185 Sqmm 7 3X120+1X95+1X16 Sq Mm Ab Cable 8 Lt Pvc Cable Al 3.5*150 / 70Sqmm 9 Lt Pvc Cable Al 3.5*400 Sqmm 10 T / F 100Kva 11 / .4 Kv New 11 T / F 250Kva 11 / .4 Kv New 12 11 Kv V.C.B Outgoing 13 11 Kv V.C.B Incoming 14 Gi Pipe 6 Dia 15 11 Kv Cable Jointing Kit I / D And O / D 16 Earthing Set Complete 17 Stay Set Complete 18 11 Kv V Type Cross Arm Complete 19 11 Kv Pin Insulator With Pin 20 11 Kv Disc Insulator Complete 21 Lt Incoming Panel With Metering Equipment 22 F Bracket 23 Tee Off Channal 24 Number Plate 25 Barbed Wire 26 Danger Board With Clamp 27 Dead End Clamp 28 3 Phase Lt Distribution Box With Holding Clamp 29 Lt Insulation Pearacing Clamp With Pearcing Conn. 30 Top Channal 31 Dropper Channal 32 11 Kv Fuse Set 33 11 Kv Tpmo Complete 34 Clamp For Top & Dropper Channal With N&B 35 Cross Bracing M.S Angle 36 Clamps With Bolt & Nut 37 P.G Clamp 38 Lt Piller Box 39 Al Lug 120 Sqmm 40 Al Lug 400 Sqmm 41 Suspension Clamp With I Huck Complete 42 I Hook With I Bolt 43 Nut, Bolt & Washer 44 Scope Of Work 45 Errection And Grouting Of Following Poles Including Cutting Of Kharanja / Mettalic Road / Concrete Portion While Digging Pit & Complete H.T. / L.T. Fittings As Per Respo Manual And As Per Direction Of Engineer Incharge Including The Cost Of Labour, T&P And Carrier Etc. Required For Proper Completion Of Work. 46 8.5 Mtr. Long Pcc Poles. 47 11 / 13 Mtr. S.T. Poles 48 Double Pole Complet Fitting 49 Laying, Sagging And Stringing And Nozzling / Binding Etc. Ofnew &Old Acsr Weasal Conductor / Giin 11 Kv / Lt Lines As Per Respo Manual And As Per Direction Of Supervising Engineer. 50 Acsr Dog / Racoon Conductor 51 3*120+1*95 Sqmm. Ab Cable 52 Xlpe Cable Of Size 3*185Mmsq 53 Lt Pvc Cable Al 3.5*150 / 70 Sqmm 54 Lt Pvc Cable Al 3.5*400 Sqmm 55 Safe Installation Offollowing New Cousted T / Fin Proper Alignment Direction & Making All Ht / Lt Connection. 56 250 Kvat / F 57 100 Kva T / F 58 Fixing Of Gi Pipe 6 Dia 59 Fixing Of Followingclamps For Completion Of Work 60 Danger Board 61 Number Plate 62 Tpmo 63 3 Phase Lt Distribution Box 64 11 Kv Fuse Set 65 Fixing Of 11 Kv Cable Jointing Kit I / D And O / D 66 Errection And Grouting Of Stays As Per Respo Norms And As Per Direction Of Supervising Engineer. Grouting Material I.E. Cement, Sand, Brick Ballast / Stone Ballast Etc. Shall Be Arranged By The Contractor At His Own Cost. 67 Fixing Of Earthing Rod As Per Respo Norms And As Per Direction Of Supervising Engineer. 68 Construction Of Plinth Of Size 5 * 5 * 4 Above Ground Level One Ft Below The Ground Level Of 9 After Exavation Of 4 Earth Brick Ballast Shall Be Provided And Rammering Willbe Done Properly After Ballast Shall Be Provided And Rammering Will Be Done Properly After That A Retaining Wall 9Width By Fist Class Brick In Ratio 1:4 Of Cement & Sand Shall Be Made . The Earth Shall Be Filled Up To One Ft.Below The Top Of The Plinth After This Brick Ballast Shall Be Provided Upto 6From The Earth Level And Proper Rammering Shall Be Done One No. Jall Of 12 Mm Ms Tor Shall Be Fixed In The Hollow Of Plinth And One Ft. Thick Rcc In Ratio Of Cement Sand & Stone Ballast Shall Be Laid On The Top Of The Plinth. The 12 Mm Thick Plastering Shall Be Done All Round The Plinth In 1:4 Ratio Of Cement And Sand. 69 Pipe Earthing Of 250 / 400 Kva Medium Power Transformers 70 Net Fencing Shall Be 1150*1200 Mm Made Of 35*35 Mm Ms Angle Covered By Expended Netal 14 Swg Up To Full Height 1200 Mm Duly Steftened By Ms Flat By An 8 Swg Dia Bolt & Nut 71 Guarding Of 11 Kv Line By Laying, Stringing, Sagging And Binding Of 2 Nos. Parallel Gi Wire 6 Swg / 8 Swg After Providing, Fabrication And Fixing Of Guarding Angle And Fabrication And Fixing Of X-Guards ( Tillis ) Of Gi Wire At Distance Of 3 Mtr. 72 Fixing And Grouting Of Lt Incomming Pannel With Metering Equipments 73 Safe Dismantling Offollowing Old & Usedt / F And Materialwith Opening Of All Connection With Safe Carriage Up To Je Store / Esc Hathras ( Distance Range 0 To 50 Km ) 74 100 / 63 / 25 Kvat / F From Double Pole 75 Acsr Wesal Conductor Scrape 76 Installation Of Extra T On The Erected Poles Wherever Required Alongwith All Fitting As Per Direction Of Supervising Engineer Including The Cost Of Labour, T&P Etc, Required For Proper Completion Of Work. The T Pole Shall Be Grouted With Cement, Sand And Brick Ballast / Stone Ballast In Ratio 1:4:8 Including The Cost Of Material. 77 Safe Dismenteling Of Old 5 Mva T / F From Foundation And Carriage It From Switch Yard To Out Side Boundary 78 Fixing And Grouting With Earthing Of 11 Kv Vcb Panel 79 Construction Of Plinth Suitable For10 Mva T / Fabove Ground Level One Ft Below The Ground Level Of 9 After Exavation Of 4 Earth Brick Ballast Shall Be Provided And Remaining Willbe Done Properly After Ballast Shall Be Provideda Retaining Wall 9Width By Fist Class Brick In Ratio 1:4 Of Cement & Sand Shall Be Made . The Earth Shall Be Filled Up To One Ft.Below The Top Of The Plinth After This Brick Ballast Shall Be Provided Upto 6From The Earth Level And Proper Rammering Shall Be Done One No. Jall Of 12 Mm Ms Tor Shall Be Fixed In The Hollow Of Plinth And One Ft. Thick Rcc In Ratio Of Cement Sand & Stone Ballast Shall Be Laid On The Top Of The Plinth. The 12 Mm Thick Plastering Shall Be Done All Round The Plinth In 1:4 Ratio Of Cement And Sand. 80 Making All H / T / Jumpers Of Installed New / Repaired 10 Mva T / F After Completion Of Work 81 Earthing Of 10 Mva Power T / F ( Body & Neutral ) 82 Cutting, Chopping, Triming Of Tree Branches To Clear The Line Route To Give2 Mtr. Horizontal And Vertical Clearance To The Line Coming In The Route Ofdifferent Feeders As Per Direction Of Supervising Engineer

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 24-03-2023 Tender Document Technical Bid 29-03-2023
2 29-03-2023 Date Date 31-03-2023
3 31-03-2023 Extend Date Date 02-04-2023

Key Value

Document Fees
INR 3540 /-
EMD
INR 50000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail