Public Works Department-PWD has published Tender For Repair/Renovation To Various Residential Buildings Under Division No Iii Shimla. (Sh- Repair Of Flooring, Ceiling, Repair Of Door Windows And Other Miscellenous Repair Work In Block 20 Set No.19 At U.S Club Shimla.). Submission Date for this Tender is 31-03-2023. Civil Work Tenders in Shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Demolishing cement concrete manually/ by mechanical means including disposal of materialcomplete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge:- Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). |
2 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :In cement mortar |
3 | Dismantling tiled floors laid in mortar upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials within all leads(wooden/concrete joists to be measured and paid for separately) For all thickness of tiles 25mm and upto 40mmincluding carriage of materials in all leads and lifts. |
4 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet. including carriage of materials within all leads and lifts |
5 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
7 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
8 | Stone soling properly hand-packed filling interstices with Kharanja stone including spreading watering of binding materials moorum or earth etc. complete as per HP.PWD specification 150mm spread thickness (finished work including materials and labour) including carriage of materials within all leads and lifts. |
9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)including carriage of materials within all leads and lifts.:- All kinds of soil. |
10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth levei 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
12 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick |
13 | Brick work using common burnt clay building bricks in foundation and plinth Cement in Mortar 1:6 (1 Cement : 6 Sand).Second Class Bricks including carriage of materials within all leads and lifts. |
14 | Half brick masonry in common burnt clay building bricks in super-tructure above plinth level upto floor two level.Cement Mortar 1:4 (1 cement:4 sand) Second Class Bricks including carriage of materials within all leads and lifts. |
15 | Marble work 18mm thick gang saw cut (polished and machine cut) of approved quality make colour and thicknessfor wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately) complete as per direction of Engineer-in- charge including carriage of materials within all leads and lifts. |
16 | Providing wood work in frames of false celling partitions etc. sawn and put-up in position complete including carriage of materials within all leads and lifts in 2nd class deodar wood. |
17 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.complete. including carriage of materials within all leads and lifts.:- Rae wood/chill wood |
18 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge Second class D/Dar wood. 35 mm thick shutters. including carriage of materials within all leads and lifts. |
19 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :including carriage of materials within all leads and lifts.35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second d/dar wood. |
20 | Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately including completeincluding carriage of material in all leads and lifts |
21 | Providing and fixing 19mm thick water proof Commercial Boardshutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts |
22 | Providing and fixing 19mm thick water proofcommercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts |
23 | Providing and fixing 1.0 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts. |
24 | Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts. |
25 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials within all leads and lifts.250x16mm |
26 | Providing and fixingaluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials within all leads and lifts. (i)250 X 10 mm size. |
27 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125mm. |
28 | 100mm |
29 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials within all leads and lifts:- Double strip (horizontal type). |
30 | Providing and fixing0.63 mm thick PGI sheet ceiling/lining of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts. |
31 | Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
33 | Providing and fixing M.S. BP Sheet2mm thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in charge (Base members of steel work shall be measured and paid separtely) including carriage of materials within all leads and lifts. |
34 | Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel worksincluding carriage of materials within all leads and lifts. |
35 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied of approved brand and manufacture ncluding carriage of materials within all leads and lifts. |
36 | Providing and laying vitrified floor tiles of600mm X 600mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.30 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete . |
37 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead, for all leads including all lifts involved complete including carriage of materials within all leads and lifts. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail