Delhi Jal Board-DJB has published Tender For Renovation And Improvement Of Amba Bagh Bps By Various Mechanical Works At Amba Bagh Bps Ac-19. Submission Date for this Tender is 29-03-2023. Mechanical engineering Service Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantling of electric connection from panel and motor, pump and motor from coupling, motor and pump removed from base frame. Removingsuction and delivery lines, sluice valves, NRV, old damaged MS base frame from foundation etc by electric cutter, gas cutter, tools and tackles, manual labour and shifting the same to JE store. |
2 | Breaking of existing RCC foundation by manual means including manual tools or electric demolition hammer as per site requirement including digging upto 50 cm for laying the new foundation and disposing off malba as per instructions from engineer – in – charge within 1 km of radius from site. |
3 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump and panel including form work and finishing etc as required of size 11mX1.8mX0.7m for pump, and panelas per site requirement. DSR E&M 14.10 . |
4 | Providing and fixing of MS base frame as per site sample and directions of engineer in charge for 40 HP motor and pump set. |
5 | Supply of GI Pipe 40 mm,make Jindal / tata / DJB approved make. |
6 | Supply of M.s. pipe 150 mm, 6 mm thick. Make: Jindal / Tata / DJB approved make. |
7 | Supply of M.S. Flange 150 mm dia heavy duty holes as per site requirement. Make: ISI/ Jindal/ DJB approved make. |
8 | Supply of MS 90 degree bend made from 8 mm thick MS pipe |
9 | Supply of 150 mm dia cast iron double flanged manually operated sluice valve generally conform to IS:14846 having body, door, dome, gland in graded cast iron to IS:210, Gr.Fg.260, four faces of SS ASTM A743 Gr.CF8 and spindle nut of leaded tin bronze to IS:318, outside screwed rising stainless steel AISI:431 spindle. Valves of size 350mmø and above will be with BTB and gear box arrangement for ease in operation. Valves to be tested by closed end method only. Flanges to be drilled as per IS:1538 Part-IV & VI. Valves are suitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1 rating). Make: Kirloskar/ IVC/ Dorot/ Skope. |
10 | Supply of 150 mm dia NRV CI double flanged swing type non return valve as per IS:5312 PN 1.0 CI body door / bronge to rubber ring / SS 410 twin pin for PN 1.0 rating. Make: Kirloskar/ IVC/ Dorot/ Skope. |
11 | Supply of MS Nut bolt & Washer of off size as per size requirement. |
12 | Supply of Neoprene Rubber sheet as per size requirement. |
13 | Fabrication /fixing of coupling guard made by 40mmX6mm M.S Flat and M.S sheet. Work includes fixing of new coupling guard in all respect and painting with anticorrosive primer and painting with black synthetic enamel paint |
14 | Installation of 30 HP pump and motor(provided by department) on to the newly laid foundation and base frame including proper alignment of pump and motor with the help of manual labour and tools and tackles as per site requirement and directions of engineer in charge. |
15 | Providing fixing of suitable size tyre coupling for the 30 HP motor and pump including making bore holes as per site requirement, and alignment of motor and pump as per site requirement. Make of Coupling: Unique/Fenner/ DJB approved make. |
16 | Installation and fixing of all the above material with required material handling equipments with all safety precautions for installation. The job i/c erection the complete pipeline, valve, NRV with hardware goods on each joint, connecting the delivery line of the pump with the existing header line and suction line of 30 HP pumphouse to the UGR after providing the shutdown as per site requirement. The job includes making good any civil damage done while installation of suction and delivery line, making electric connections to motors and starters while taking proper safety precautions etc as per site engineer in charge. |
17 | Painting the complete pipeline, motor, pump sets, nrv, sluice valves etc with two coats of anti- corrosive paint as per directions of engineer in charge. |
18 | Testing & commissioning of above system first at NO LOAD & then at ON LOAD and for its proper operating as per the satisfaction of engineer in charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail