Tender For Construction Of Additional School Building ( 2 Class Room) At S.F No.736 In Pallapatti Municipality.
Tender Value
21 Lakhs
Estimated cost
Bid Submission
31 Mar 2023
0 days left
EMD
21000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pallapatti → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Additional School Building ( 2 Class Room) At S.F No.736 In Pallapatti Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in all soils and sub soils to full depth as may be directedby the departmental officers exceptin hard rock requiring blasting but inclusive of shoring, strutting and balling out water wherever nessasaryand depositingthe earth within initial leadof 10 metre and initial lift of 2 metreetc., completeas per Standard specifications SS. |
| 2 | Supplying and filling with river sandin layers of not more than 15cm thick well rammed watered and compacted including cost and conveyance of sand and filling charges etc complete as per standard specification |
| 3 | Plain cement concrete 1:4:8 ( One cement four sand and eight broken granite metal ) using 40 mm ISS size HBG metal including cost and conveyance of all materials to working site, laying concrete, compacting,curing, dewatering if necessary and finishing neatly etc. complete complying with standard specification. |
| 4 | Supplying and Erecting Steel Centering for sides andsoffits including supports and strutting upto3.29 m height for planesurfaces such as RCC Slabs,Lintels, Bed blocks,canopyetc., with all cross brasingsusing mild steelsheets of size 90cmx60cm and 10 gauge stiffenedwithwelded MS anglesof size 25mmx25mmx3mm for boardinglaid over silver oak (CW) joists of size 10cmx6.5 cm spaced at about90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/cetc., complete complying with SS and as Directed. |
| 5 | Without strutting |
| 6 | Column |
| 7 | Beam and Slab |
| 8 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 9 | Below G.L. |
| 10 | Above G.L. |
| 11 | Supplying fabricating and placing in position of mild steel or ribbed tar steel for reinforced cement concrete works including cost of steel binding wire all labour charges for cutting fabrication and placing of rods and other incidental charges etc., complete as per standard specification. |
| 12 | Brickworkin cementmortar1:5 (one cement and five sand)using second class chamberbricks of standerd size22cm x 11 cm x 7 cmincluding cost and conveyance of all materials to siteand labour charges etccompleteas perStandard specification. |
| 13 | Below Basement |
| 14 | Above Basement |
| 15 | Plastering with cement mortar 1: 3 mix (One cement and threesand)10 mm thickincluding cost and conveyance of all materials, finishing, curing, and all labour charges etc. complete as per Standard specification. |
| 16 | Plastering with cement mortar 1:5 mix (One cement and fivesand)12 mm thickincluding cost and conveyance of all materials, finishing, curing, and all labour charges etc. complete as per Standard specification. |
| 17 | Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 18 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum |
| 19 | Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. |
| 20 | Towards the charges for Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc |
| 21 | Towards the Charges for FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle /Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified byEngineers |
| 22 | Providing UPVC (Un-Plasticized Polyvinyl Chloride)Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outerframe 60mm x 55mm with an outer wall thickness of2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. Thehandles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 23 | Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T.switch with painting of suitable colour for open PVC light point / fan point (For electronic regulator) (5 Points per coil). (SD-18) |
| 24 | Wiring with 2 x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 15 SWG TC wire for open PVC plug point. (SD-37) |
| 25 | Wiring with 2x4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point. (SD-41) |
| 26 | Supply and fixing of 1200mm (48\") AC ceiling fan complete with stepped electronic 300w regulator with 11 meter down rod on the existing clamp. |
| 27 | Supply and fixing of 20 W LED tube light fitting with ISI Mark with all accessoreis including cost of an LED light with accessories and fitting charges etc., complete. |
| 28 | Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of \"U\" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm] |
| 29 | Supply and fixing of 30 W LED street light fitting with ISI Mark with all accessoreis including cost of an LED light with accessories and fitting charges etc., complete. |
| 30 | Painting two coats over new iron work with ready mixed paint of approved quality and colour including cost of all materials and labour charges etc complete as per SS. |
| 31 | Supply and run of 2 of 1.5 sq.mm (22/0.3) pvc insulated sc unsheathed cu.conductor of 1100V gradeon 7/20 GI bearer wire for service connection mains |
| 32 | Supply and run of 2 of 1.5 sq.mm (22/0.3) pvc insulated sc unsheathed cu.conductor of 1100V grade in 25MMdia GI pipe( class\"B\") suitabley bend at both ends with necessary angle iron up right and end supports for mains. |
| 33 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
AI Tender Summary
Tender Timeline
Mar 23, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender