Construction Of Rural Water Supply Scheme With 2.0 Hp Dc Solar Motor Pump Complete Set & 3 M Dia X 5 M Depth Spring Sanitary Well For Tolas / Village/Areas Insunderpahari Block Which Is Not Included In Mvs And Has No Electricity Or Less Electricity To Sup, Godda-Jharkhand

TDR : 36938671

Tender Notice
Corrigendum Details
BOQ

Expired

Godda , Jharkhand

Tender Brief : Corrigendum : Construction Of Rural Water Supply Scheme With 2.0 Hp Dc Solar Motor Pump Complete Set & 3 M Dia X 5 M Depth Spring Sanitary Well For Tolas / Village/Areas Insunderpahari Block Which Is Not Included In Mvs And Has No Electricity Or Less Electricity To Sup

Document Fees
₹ 10000 /-

EMD
₹ 158000.0 /-

Tender Value
₹ 78.95 Lakhs /-

Submission Date
28-03-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	27-03-2023	Corrigendum 1	Other	28-03-2023
2	23-03-2023	Corrigendum	Other	28-03-2023

Name of Work: Construction of rural water supply Scheme with 2.0 HP DC Solar motor pump complete set & 3 M Dia X 5 M Depth Spring Sanitary Well for Tolas / Village/Areas inSunderpahari Block which is not included in MVS and has no electricity or less electricity to supply water 2000 LPH at least 15/30 year for 24x7 supply under JJM Fund under DWSD Godda for the year 2022-23.Group No :- SPR/SVS/G-1 MODEL TYPE - MODEL 1A NO OF FHTC - 50NO OF SCHEMES- 06

Sl. No.	Item Description
1	Construction of 3 M Dia X 5 M Depth Spring Sanitary Well
2	All labors & equipment for digging well in hard soil vide classification of soil item –B including disposal of excavated material up to 50 M lead including dressing the side etc. all complete as per specification and direction of E/I. ( Rate with initial lift up to 3 M below GL is Rs. 76.55 P/M 3and extra for each additional lift of IM or part there of over the initiallift of 3 m is Rs. 7.77 P/M3)(a) 0 M to 1.00 M depth Below GL
3	Supplying all labor & equipment for digging well in soft rock vide classification of soil item –C with chisel and hammer including disposing of excavated materials and stacking of spoils to asafe distance of 50 M all complete as per specification and direction of E/I (Rate with initial lift up to 3 M below GL is 340.25 P/M3 and extra for each additional lift of 1M or part there of over the initial lift of 3M is Rs. 37.95 P/M3)a) 1.00 M to 3.00M depth Below GL
4	(b) 3.00 M to 4.00M depth Below GL
5	(c ) 4.00 M to 5.00M depth Below GL
6	Supplying all materials and labours for providing rough dressed stone masonary in cement mortar (1.6) in parapet wall and platform of the well including shuttering, scaffolding if needed etc. all complete job as per specification and direction of E/I.(A) Stening wall of well (a) 0.00 to 3.00 mtr below GL= 3.00 mtr
7	(b) 3.00 to 4.00 mtr below GL= 1.00 mtr
8	c) 4.00 to 4.80 mtr below GL= 1.00 mtr
9	B) In Perapet wall of well above GL
10	(b) Platform Surface
11	Supplying materials labours for fixing 20mm dia M.S bar steps in staining wall of 0.5M interval and staggered in cement concrete (1.2.4) including scaffolding and curing etc. all complete job as per specification and direction of E/I.
12	Supplying all materials and labours for providing cement mortar (1.3) cement flush pointing in staining wall including curing, centering and scaffolding etc. all complete job as per specification and direction of E/I.(A) Flush pointing in staining wall(a) 0.00 to 3.00 mtr below GL= 3.00 mtr
13	(b) Plateform outer side
14	Supplying materials and labours for providing 12 mm thick cement plaster in cement mortar (1.3) CM with neat cement punning over the exposed surface of platform, parapet & drain with neat cement punning including curing etc, all complete job as per specification and direction of E/I
15	Providing R.C.C M-200 in beam of well with nominal mix(1.1.5.3) & RCC M-150 in cover slabwith nominal mix(1.2.4) with approved quality of stone chips graded and clean coarse sand of F.M.2.5 to 3.0 including screening, shuttering, mixing, cement concrete and placing in position vibrating, striking, curing, tax & royalty excluding the cost of M.S. reinforcement all complete job as per specification and direction of E/I.(a)In Beam(RCC M-200)
16	(b)In Cover slab(RCC M-150)
17	Providing T.M.T steel reinforcement of 8 mm dia rods as per approved design and drawingincluding carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
18	Supplying fitting and fixing 600mm x 450mm size C/I Man hole cover with frame (Wt .Not less than 25 Kg) etc. allcomplete job as per specification and direction of E/I.
19	Supplying all labours , tools & plants for dewatering of well by diesel machine including cost of fuel & hire charge of diesel pump during the period of excavation & masonry work all complete job as per direction of E/I. 3 HP for 15 Hrs. (HSD not included)
20	Supplying all tools equipment and labour for desilting the well all complete as per specification and direction of E/I . Desilting of well shall be done at the initial stage.
21	Providing 250 mm wide brick drain in cement mortar (1:6) with av 150 mm clear depth and 250 mm apron including cost of E/W in excavation, with 80 mm cement concrete (1:2:4) over one brick designation 100 A flat soling in proper grade and slope at the base,the drain duly plastered in C.M (1:3 ) with punning over exposed surface all complete asper building specification direction of E/I.
22	Filling in foundation trenches and plinth in layers not exceeding 150mm thick, well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specifications and direction of E/I.(Mode of measurement-compacted volume).Earth filling around well up to 1 mtr depth below GL
23	Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts including cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I ( mode of measurmet compacted volume)
24	Carriage of materials to work site by mechanical transport including loading, unloading and stacking at site etc. all complete job as per specification and direction of E/I.
25	a. Cement - 20 Km Lead
26	b. Sand-15 Km Lead
27	c. Stone Chips-20 km Lead
28	d. Steel - 20 km Lead
29	e. Boulder - 20 Km Lead
30	Carriage of construction materials by head load or bahangi from aproch road to hill type working site including loading unloading and carrying in all left and av. 250 lead including stacking at work site as per direction of E.I al complete job
31	Fuel for diesel M/C for dewatering Lubricant & HSD
32	Provision of 2 H.P. D.C. SolarMotor Pump Complete Set
33	Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories.
34	SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PVmodules should be minimum 200 watt peak.
35	i) The SPV modules should be as per IEC-61215 and IEC 61730 part 1.0)
36	ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required.
37	iii) The PV modules shouldbe mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h.
38	iv) The module mounting structure should be hot dip galvanized according to IS 4759.
39	v) To enhance the performance of SPV water pumping system & arrangement for seasonal tilt angle Adjustment should be provided
40	vi) Necessary arrangement should be provided in controller automatic start-run-stop through out the day with water level detection system. (As per MNRE Specification)
41	vii) Necessary protection such as lightening arrestor etc. should be provided to protect the controller & SPV
42	viii) The suction/delivery pipe shall be UPVC / H.D.P.E. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/Sq cm- PE 100 grade for pump up to 3HP & 10 Kg/Sq cm- PE 100 grade for 5 HP.
43	ix) All cable used shall be as per IS 694. Suitable size of cable shall be used in sufficient length for inter connection between the SPV array to SPV controller and SPV controller to solar power pump. Provision of cable shall be as per IS 14536.
44	x) The motor pump set should have a 5 years warranty.
45	xi) Control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (As per MNRE Specification)
46	xii) The SPV controller must have IP-65 protection or must be housed in cabinet having at least IP-65 protection.
47	xiii) The system should be as per MNRE guide line & Ecofriendly with suitable arrangement to operate new pump manually.
48	xiv) With third party inspection before dispatch.
49	xv) Provision for web basedremote monitoring of the pumps to be installed must be made through the inbuilt controllers . It should be possible to ascertain the daily water output, the power generated by PV Array ,the Up and downtime of the pump during the year, number of days the pump was unused or under breakdown repairs.
50	The following details should be marked indelibly on the motor pump set
51	a) Name of the Manufacturer or Distinctive Logo.
52	b) Model Number.
53	c) Serial Number.
54	Solar submersible motor pump (SPV DC Type)
55	i) 2 HP (DC Pump) with 1800 wp minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 100 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)
56	Provision of solar night lamp.
57	Extra Solar cable required from Spring well to TankSupply & laying of PVC 3 core PVC insulated , PVC sheathed copper conductor flat submersibble cable3 core 6 sq mm - 700 M avgfor 1 no scheme
58	Construction RCC Foundation for Steel structurestaging& Solar panel .
59	Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I (vide classification of soil item -B)
60	Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume)
61	Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I
62	Providing PCC M-150 in nominal mix of (1:2:4) in foundationwith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I
63	Providing RCC M-200 in nominal mix of (1:1.5:3) in columnswith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I.(i) Foundation for Steel Structure Staging
64	Footing
65	Vertical Pedestal
66	Tie Beam
67	(ii) Foundation for Solar Panel
68	Footing
69	Vertical Pedestal
70	Providing Tor steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. 10 mm dia
71	12 mm dia
72	Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.(Assuming 10%)
73	Construction ofgalvanized tubular Steel structure staging for (4.5m)HDPE water storage Tank& Solar Panel.
74	For Structure :---
75	Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete.
76	Grand Total:- Total wt for HDPE Storage strucure & Total wt for Solar Panel893.01+ 108.75= 1001.76kg for 1 No Structure
77	Information board for IEC
78	Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete
79	Total=27.20kg for 1 No Structure
80	Materials and labour for vinyl painting of matter given by department in different color (As per Market Rate)
81	Total=1.26m2 for 1 Structure
82	Installation of 2000 liters Capacity Water Storage Tank
83	Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 2000.00 litres Capacity Water storage Tank
84	Transportation Charge
85	Lifting of 2000 Litrs Capacity Tank up to 4.5m height with lifting tools with rope and labour
86	Making hole in Tank
87	Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc.
88	Distribution Network & House Connectionfor 10 Nos. including Platform & Stand postSunderpahari Panchayat:-Kairasol Village:- Karra Khas
89	Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
90	Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete
91	Providing PCCM-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion
92	RisingManufacture, supply and Delivery offollowing Nominal dia UPVC column pipes including PVC socket (Coupler), 65mmdia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
93	50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
94	DistributionProviding and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488,ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
95	63 mm HDPE Pipe-
96	50 mm HDPE Pipe-
97	32 mm HDPE Pipe-
98	20 mm MDPE Pipe-
99	Providing and fixing Gun Metal Gate valvewith C I wheel of approved quality(screwed end)50 mm dia
100	65 mm dia
101	Providing and supplying High Density Polyethylene(HDPE )fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488, ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
102	Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge
103	Rising50 mm HDPE pipe
104	63 mm HDPE pipe
105	Distribution
106	63 mm HDPE Pipe-
107	50 mm HDPE Pipe-
108	32 mm HDPE Pipe-
109	20 mm MDPE Pipe-
110	Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
111	Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
112	Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I
113	Elbow 15 mm dia
114	Reducer Socket 20 x 15 mm dia
115	Nipple 15 mm dia
116	Plain Socket 15 mm dia
117	Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
118	Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socketall complete as per specification and direction of E/I
119	Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I65 mm dia Full way valve
120	50 mm dia weight not less than 1.5 Kg.
121	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
122	Supplying materials , labours and equipment\"s for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surfaceall complete job, as per approved design, specification and direction of E/I.
123	Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
124	Providing fitting & fixing 32 mm to 50 mm service HDPE saddleall complete job, as per approved design, specification and direction of E/I.
125	Distribution Network & House Connectionfor 8 Nos. including Platform & Stand postBlock :- Sunderpahari Panchayat :- Bara Dhamni Village:- Madgi Mako Khas
126	Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
127	Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete
128	Providing PCCM-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion
129	RisingManufacture, supply and Delivery offollowing Nominal dia UPVC column pipes including PVC socket (Coupler), 65mmdia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
130	50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
131	DistributionProviding and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488,ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
132	63 mm HDPE Pipe-
133	50 mm HDPE Pipe-
134	32 mm HDPE Pipe-
135	20 mm MDPE Pipe-
136	Providing and fixing Gun Metal Gate valvewith C I wheel of approved quality(screwed end)50 mm dia
137	65 mm dia
138	Providing and supplying High Density Polyethylene(HDPE )fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488, ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
139	Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge
140	Rising50 mm HDPE pipe
141	63 mm HDPE pipe
142	Distribution
143	63 mm HDPE Pipe-
144	50 mm HDPE Pipe-
145	32 mm HDPE Pipe-
146	20 mm MDPE Pipe-
147	Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
148	Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
149	Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I
150	Elbow 15 mm dia
151	Reducer Socket 20 x 15 mm dia
152	Nipple 15 mm dia
153	Plain Socket 15 mm dia
154	Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
155	Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socketall complete as per specification and direction of E/I
156	Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I65 mm dia Full way valve
157	50 mm dia weight not less than 1.5 Kg.
158	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
159	Supplying materials , labours and equipment\"s for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surfaceall complete job, as per approved design, specification and direction of E/I.
160	Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
161	Providing fitting & fixing 32 mm to 50 mm service HDPE saddleall complete job, as per approved design, specification and direction of E/I.
162	Distribution Network & House Connectionfor 8 Nos. including Platform & Stand postBlock :- Sunderpahari Panchayat :- Ghatiyari Village:- Pawkuriya
163	Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
164	Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete
165	Providing PCCM-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion
166	RisingManufacture, supply and Delivery offollowing Nominal dia UPVC column pipes including PVC socket (Coupler), 65mmdia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
167	50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
168	DistributionProviding and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488,ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
169	63 mm HDPE Pipe-
170	50 mm HDPE Pipe-
171	32 mm HDPE Pipe-
172	20 mm MDPE Pipe-
173	Providing and fixing Gun Metal Gate valvewith C I wheel of approved quality(screwed end)50 mm dia
174	65 mm dia
175	Providing and supplying High Density Polyethylene(HDPE )fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488, ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
176	Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge
177	Rising50 mm HDPE pipe
178	63 mm HDPE pipe
179	Distribution
180	63 mm HDPE Pipe-
181	50 mm HDPE Pipe-
182	32 mm HDPE Pipe-
183	20 mm MDPE Pipe-
184	Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
185	Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
186	Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I
187	Elbow 15 mm dia
188	Reducer Socket 20 x 15 mm dia
189	Nipple 15 mm dia
190	Plain Socket 15 mm dia
191	Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
192	Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socketall complete as per specification and direction of E/I
193	Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I65 mm dia Full way valve
194	50 mm dia weight not less than 1.5 Kg.
195	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
196	Supplying materials , labours and equipment\"s for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surfaceall complete job, as per approved design, specification and direction of E/I.
197	Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
198	Providing fitting & fixing 32 mm to 50 mm service HDPE saddleall complete job, as per approved design, specification and direction of E/I.
199	Distribution Network & House Connectionfor 8 Nos. including Platform & Stand postBlock :- Sunderpahari Panchayat :- Ghatiyari Village:- Tamlibedo
200	Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
201	Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete
202	Providing PCCM-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion
203	RisingManufacture, supply and Delivery offollowing Nominal dia UPVC column pipes including PVC socket (Coupler), 65mmdia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
204	50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
205	DistributionProviding and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488,ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
206	63 mm HDPE Pipe-
207	50 mm HDPE Pipe-
208	32 mm HDPE Pipe-
209	20 mm MDPE Pipe-
210	Providing and fixing Gun Metal Gate valvewith C I wheel of approved quality(screwed end)50 mm dia
211	65 mm dia
212	Providing and supplying High Density Polyethylene(HDPE )fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488, ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
213	Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge
214	Rising50 mm HDPE pipe
215	63 mm HDPE pipe
216	Distribution
217	63 mm HDPE Pipe-
218	50 mm HDPE Pipe-
219	32 mm HDPE Pipe-
220	20 mm MDPE Pipe-
221	Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
222	Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
223	Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I
224	Elbow 15 mm dia
225	Reducer Socket 20 x 15 mm dia
226	Nipple 15 mm dia
227	Plain Socket 15 mm dia
228	Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
229	Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socketall complete as per specification and direction of E/I
230	Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I65 mm dia Full way valve
231	50 mm dia weight not less than 1.5 Kg.
232	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
233	Supplying materials , labours and equipment\"s for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surfaceall complete job, as per approved design, specification and direction of E/I.
234	Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
235	Providing fitting & fixing 32 mm to 50 mm service HDPE saddleall complete job, as per approved design, specification and direction of E/I.
236	Distribution Network & House Connectionfor 8 Nos. including Platform & Stand postBlock :- Sunderpahari Panchayat :- Karmatanr Village:- Kesripara
237	Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
238	Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete
239	Providing PCCM-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion
240	RisingManufacture, supply and Delivery offollowing Nominal dia UPVC column pipes including PVC socket (Coupler), 65mmdia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
241	50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
242	DistributionProviding and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488,ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
243	63 mm HDPE Pipe-
244	50 mm HDPE Pipe-
245	32 mm HDPE Pipe-
246	20 mm MDPE Pipe-
247	Providing and fixing Gun Metal Gate valvewith C I wheel of approved quality(screwed end)50 mm dia
248	65 mm dia
249	Providing and supplying High Density Polyethylene(HDPE )fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488, ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
250	Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge
251	Rising50 mm HDPE pipe
252	63 mm HDPE pipe
253	Distribution
254	63 mm HDPE Pipe-
255	50 mm HDPE Pipe-
256	32 mm HDPE Pipe-
257	20 mm MDPE Pipe-
258	Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
259	Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
260	Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I
261	Elbow 15 mm dia
262	Reducer Socket 20 x 15 mm dia
263	Nipple 15 mm dia
264	Plain Socket 15 mm dia
265	Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
266	Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socketall complete as per specification and direction of E/I
267	Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I65 mm dia Full way valve
268	50 mm dia weight not less than 1.5 Kg.
269	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
270	Supplying materials , labours and equipment\"s for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surfaceall complete job, as per approved design, specification and direction of E/I.
271	Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
272	Providing fitting & fixing 32 mm to 50 mm service HDPE saddleall complete job, as per approved design, specification and direction of E/I.
273	Distribution Network & House Connectionfor 8 Nos. including Platform & Stand postBlock :- Sunderpahari Panchayat :- Bansjori Village:- Chaalgora
274	Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.
275	Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete
276	Providing PCCM-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion
277	RisingManufacture, supply and Delivery offollowing Nominal dia UPVC column pipes including PVC socket (Coupler), 65mmdia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main
278	50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe
279	DistributionProviding and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488,ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
280	63 mm HDPE Pipe-
281	50 mm HDPE Pipe-
282	32 mm HDPE Pipe-
283	20 mm MDPE Pipe-
284	Providing and fixing Gun Metal Gate valvewith C I wheel of approved quality(screwed end)50 mm dia
285	65 mm dia
286	Providing and supplying High Density Polyethylene(HDPE )fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/ 14151/ 12786/ 13488, ISO 4427 , DIN-8074materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10
287	Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge
288	Rising50 mm HDPE pipe
289	63 mm HDPE pipe
290	Distribution
291	63 mm HDPE Pipe-
292	50 mm HDPE Pipe-
293	32 mm HDPE Pipe-
294	20 mm MDPE Pipe-
295	Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.
296	Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.
297	Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I
298	Elbow 15 mm dia
299	Reducer Socket 20 x 15 mm dia
300	Nipple 15 mm dia
301	Plain Socket 15 mm dia
302	Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.
303	Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socketall complete as per specification and direction of E/I
304	Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I65 mm dia Full way valve
305	50 mm dia weight not less than 1.5 Kg.
306	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
307	Supplying materials , labours and equipment\"s for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surfaceall complete job, as per approved design, specification and direction of E/I.
308	Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.
309	Providing fitting & fixing 32 mm to 50 mm service HDPE saddleall complete job, as per approved design, specification and direction of E/I.
310	Annual Operation & Maintenance cost for 5 years.
311	O & M Cost for 1st year
312	O & M Cost for 2nd year
313	O & M Cost for 3rd year
314	O & M Cost for 4th year
315	O & M Cost for 5th year
316	Provision of one no SIM card &its recharging cost for RMC
317	Provision of Galvanised chain -link mess Fencing around Solar Panel where bore well is away from tower.
318	Making 30 cm( 12\"\") dia bore up to 4m below ground with hand auger of approved quality in ordinary soil (vide classification of soil item-A) true to plum and without eccentricity in any stage of operation and disposal of the exacavated eartrh up to 50m lead including all lifts all complete as per approved design and direction of E/I.
319	Providing P.C.C.M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening,mixing cement concrete in mixer and placing in position, vibrating, curing,taxes and royalty all compelete as per building specification direction of E/I.
320	Labour cost offitting and fixing Galvanised chain -link mess up height of 2 Mincluding cost of staples (but excluding the cost of cement concrete angle iron posts,its cutting and making holes,nuts and bolts) all complete as per specification and direction of E/I.
321	Drilling 6 mm dia holes in M.S Angle iron for fixing of stables etc.as per building specification and direction of E/I.
322	Labour for cutting of M.S Angle iron posts to required length,one end splitted as fish tailed in a length of 150 mm compelete as per building specification and direction of E/I.
323	Supplying,fitting and fixing straining bolts with nut size 22cm*10mm dia tighten the barbed wire with corner post compelete as per building specification and direction of E/I.
324	Supplying,fitting and fixing Galvanised chain -link mess having 3 mm thick wire cell type 40 x 40 mm fitted onM.S. angle frame with two diagonals having 25 x 25 x 5 mm size angleincludingcost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in angle post,,applying a priming red lead paint over steel work,taxesexcluding the cost of Galvanised chain -link mess all complete.
325	Cost of Galvanised chain -link mess having 3 mm thick wire cell type 40 x 40 mm wt not less than 3.1 kg / Sq m - Lengh 8 M x 2 m high =16 M2 @ 3.1 kg/ M2=49.6 Kg say 50 Kg-
326	Cost of 50 x 50 x 6 mm M.S. angle - 8 nos x 2.75 =24.75 @ 4.5 kg / m=99.18kg
327	Cost of Carriage - 5 %
328	Add 18% GST.
329	Add 1% Labour Cess

Also Visit

Tenders

Jharkhand Tenders

Construction Tenders

Water Storage and Supply Tenders

Water Supply Project Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Rural Water Supply Scheme With 2.0 Hp Dc Solar Motor Pump Complete Set & 3 M Dia X 5 M Depth Spring Sanitary Well For Tolas / Village/Areas Insunderpahari Block Which Is Not Included In Mvs And Has No Electricity Or Less Electricity To Sup, Godda-Jharkhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Rural Water Supply Scheme With 2.0 Hp Dc Solar Motor Pump Complete Set & 3 M Dia X 5 M Depth Spring Sanitary Well For Tolas / Village/Areas Insunderpahari Block Which Is Not Included In Mvs And Has No Electricity Or Less Electricity To Sup, Godda-Jharkhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us