Urban Improvement Trust-UIT has published The Work Of Installing Led Decorative Lights And Rope Lights In Place Of The Pole Lights From Shree Guest House To Saran Chauraha. Submission Date for this Tender is 29-03-2023. LED Light Tenders in bhilwara Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply of decorative and heritage type top mounted street light with system wattage of 120W with system efficacy of minimum 100-110 Lumen/watt, having a minimum lumen output of minimum 12000 to 13200 lumen. Decorative luminaries to be made of Spun Aluminum powder coated housing with PDC heat sink and should have IP65 optical compartment. LEDs make of CREE/NICHIA/OSRAM/lumiled. A Polycarbonate Diffuser shall be fitted in the Luminaries. The length of light from top to bottom must be minimum 610mm and the diameter light must be minimum 550 mm. The Luminaries should have surge protection of 4KV - 5 KV internal and 10KV external with driver voltage range of 140-280 V AC. Integrated suitable LED Driver to be fitted inside the Luminaries, having efficiency > 85% and in compliance to IEC standards. The LED driver shall be integrated; however it should be easily replaceable, as & when required post warranty period. The warranty period of LED driver shall be 2 years from the date of installation. System life of 40000 to 50,000 burning hours with 70% of initial lumens maintained, CRI>70 and CCT 5500K ±355K. The Luminaries body should be machined and polished properly to give it a smooth surface. The luminaries shall be suitable for the fitment on the required single/double arm bracket. The luminaries shall be duly pre-treated and painted in U.V. ray resistant polyurethane paint in approved colour shade. A two way connector is provided for the mains connections. The luminaries are suitable 240 volt, single phase, AC. The warranty period of LED light shall be 2 years from the date of installation. Decorative luminaries shall beas per enclosed drawings. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.Thecolour of the light must be as per choice of site engineer.All as per pre approved by Engineer in charge. Make : Philips, Kesselec Shredder, Bajaj, Halonix,Wipro, Havells. Note:-The existing lightwill be given to the contractor. The contractor must quote the rate of new light such that the rate of the existing light must be reduced in the quoted rate. (Example- Rate of Light quoted = Rate of new Light - Rate Old Light ) |
| 2 | Supply and fixing of round National Flag colour LED Rope light ,Flexible strip type LED outdoor weaterproof Waterproofwith IP65 rating, for superior life and withstanding harsh weather. Flexible, Slim & Compact of size 20mm*12mm and length 18m(6+6+6)per strip per job. Applicable for bendable or angled patterns, or in continuous rows on existing pole , and consisting of suitable power adapter and driver complete with connection to operate system as and when etc as required.All as per pre approved by Engineer incharge. There must be 2 year warranty of rope light. Make - Philips, bajaj and HPL |
| 3 | Providing & Fixing of IP - 65 protected impact resistant polycarbonate / Polysterene enclosures. Make-Hensel, Spelsberg ,Sintex, HPL with knock out for cable entry/out including fixing with nut, bolt, fatner etc as required complete in all respect ofsize 320 x 640 x 179 mmThe enclosure must comprise of digital timer, contactor, bus bar , mcb, bypass switch and twin core 16 sq.mm. copper wire (Make- polycab/finolex/KEI) for connection. The digital time switch having following day / week programme and minimum 100 hours reserve and AC1 rating of 16-20 amperes including making connection, programming conforming to IEC 60730-1 and 60730- 2-7 etc. as required. One day & week reserve (digital type ) Make- L&T/ABB/Legrand/Siemens. The contactor must be a thermal over load relay with built in single phase protection and having at least 1NO & 1NC contacts, manual /auto reset facility including making connection testing etc. as required .70 Amp Make- Siemens, ABB, L&T, HPL. The contactor must be accompanied with a bypass switch.The busbar must be of size 25mm*3mm and 100 mm length. the MCB must be 1 pole 6 nos. and not less than 80 amp. All as per approved by engineer incharge. |
| 4 | Providing & Fixing of IP - 65 protected impact resistant polycarbonate / Polysterene enclosures. Make-Hensel, Spelsberg ,Sintex, HPL with knock out for cable entry/out including fixing with nut, bolt, fatner etc as required complete in all respect ofsize 180 x 180 x 91 mm with 2 Nos. single pole 6 amp. MCB (Make-Havells, Polycab, KEI, HPL)with wiring 4 to 5 mtr. twin core 2.5 sq. mm. aluminium cable. The box must be affixed on top of the pole with 2 nos.GINut- Bolt and GI clamp and must comprise of a indicator lamp suggesting on/off condition of supply. All the connections( light to MCB and MCB to main line) must be complete with all respect for proper functioning of light. All as per pre approved by Engineer incharge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
