Himachal Pradesh State Electricity Board-HPSEB has published Tender For Supply Of Equipment Material , Design, Erection, Testing Commissioning For Sop To Lwss Batran, Padher And Sakoh By Prov. 11/.4 Kv 250 Kva S/Stn. At Baruila Nallah A/W 11 Kv Ht Section Kher Under Esd Rehan Edfatehpur. Submission Date for this Tender is 27-03-2023. Overhead Line Tenders in dalhousie Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supply part of 11/.4 KV 250 KVA DISTRIBUTION SUB STATION |
2 | 11/.4 KV 250KVA DTR (REC Sep. ord 11/1976 |
3 | Prov. ST PolePole 9 Mtr. Long W/L 200 Kgs |
4 | Muff for steel tubular pole with concrete filling |
5 | X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line |
6 | MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LA"s ) |
7 | X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
8 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for transformer bed |
9 | X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer] |
10 | MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No. |
11 | MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos |
12 | MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing |
13 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos for Transformer LT Distribution Box and G.O switch fixing assembly |
14 | MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos for Transformer LT Distribution Box and G.O switch fixing assembly |
15 | G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm for Transformer LT Distribution Box and G.O switch fixing assembly |
16 | G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type |
17 | D.O Fuse unit |
18 | Surge Arrester, 9 kV Station Class |
19 | Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.) |
20 | Stay set complete |
21 | Staywire (7/3.15mm)( 10 Kg per stay set) |
22 | Pipe earthing with GI,Charcoal & Salt |
23 | Prov. LT distribution panel with MCCB (400 A, 36 KA, 4P,1 No.) & SFU (100 A 4 No. rewireble) for 250KVA Trf. as per specification |
24 | Half clamp (M.S. Flat 50x6) |
25 | Full clamps (M.S. Flat 50x6) |
26 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
27 | Aluminium Thimbles |
28 | Copper Thimble |
29 | Danger Plate |
30 | Barbed wire (REC Sp F 3/1981) |
31 | LT Cable 3-1/2 core-185mm sq. |
32 | Alluminium Paint |
33 | Prov.ACSR, 6/1/3.35 mm |
34 | Prov. Transformer Bed plinth for 250KVA S/Stn structure complete with CC 1:6:12 R.R. massonery & plastering etc. a/w Chain link fencing, Angle iron Gate etc. for DTR Fencing. |
35 | Erection part of 11/.4 KV 250 KVA DISTRIBUTION SUB STATION |
36 | 11/.4 KV 250KVA DTR (REC Sep. ord 11/1976 |
37 | Prov. ST PolePole 9 Mtr. Long W/L 200 Kgs |
38 | Muff for steel tubular pole with concrete filling |
39 | X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line |
40 | MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LA"s ) |
41 | X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
42 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for transformer bed |
43 | X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer] |
44 | MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No. |
45 | MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos |
46 | MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing |
47 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos for Transformer LT Distribution Box and G.O switch fixing assembly |
48 | MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos for Transformer LT Distribution Box and G.O switch fixing assembly |
49 | G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm for Transformer LT Distribution Box and G.O switch fixing assembly |
50 | G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type |
51 | D.O Fuse unit |
52 | Surge Arrester, 9 kV Station Class |
53 | Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.) |
54 | Stay set complete |
55 | Staywire (7/3.15mm)( 10 Kg per stay set) |
56 | Pipe earthing with GI,Charcoal & Salt |
57 | Prov. LT distribution panel with MCCB (400 A, 36 KA, 4P,1 No.) & SFU (100 A 4 No. rewireble) for 250KVA Trf. as per specification |
58 | Half clamp (M.S. Flat 50x6) |
59 | Full clamps (M.S. Flat 50x6) |
60 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
61 | Aluminium Thimbles |
62 | Copper Thimble |
63 | Danger Plate |
64 | Barbed wire (REC Sp F 3/1981) |
65 | LT Cable 3-1/2 core-185mm sq. |
66 | Alluminium Paint |
67 | Prov.ACSR, 6/1/3.35 mm |
68 | Prov. Transformer Bed plinth for 250KVA S/Stn structure complete with CC 1:6:12 R.R. massonery & plastering etc. a/w Chain link fencing, Angle iron Gate etc. for DTR Fencing. |
69 | Supply Part of HT LINE WITH ACSR 6/1/3.35 mm sq. ON STEEL POLES (0.780KM) |
70 | ACSR 6/1/3.35 (55mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
71 | Prov. Steel tubular poles. 9mtrs |
72 | Muff for steel tubular pole (2000mm long) with concrete filling |
73 | Cross Arm: [Channel Iron (100x50x6 mm), Length 1270 mm (i/c tolerence of 100mm either side) x2 structure( Run Through structure (Formation Tringle) |
74 | Angle Iron (50x50x5 mm), Length (2x750) mm x 1 structures (Run Through structure (Formation Tringle) |
75 | Pole Top Bracket [MSCI:100x50x6mm-100mm] |
76 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure (Run Through structure (Formation Tringle) |
77 | Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.]for Dead End Structures |
78 | X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.] for Dead End Structures |
79 | X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]for Dead End Structures |
80 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)for Dead End Structures |
81 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure for Dead End Structures |
82 | Stay set complete in all respect ( Single Pole-1No. , /D. Pole Structures-4Nos.) |
83 | Stay Wire (7/3.15 mm) (8.0 kg Per Stay Set) |
84 | HT earthing set complete (REC Constr. Standared J-1) |
85 | Single Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
86 | Eye Hook for earth wire |
87 | Earth Wire Clamp |
88 | MS Chanel Iron 75x40x6mm, length: 2400mm for road crossing/G.O Switch |
89 | Half clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) |
90 | Full clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) |
91 | Danger Plate (250X200X1.6 mm) |
92 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
93 | Barbed wire (REC Sp F 3/1981) |
94 | G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type |
95 | Alluminium Paint |
96 | Erection Part of HT LINE WITH ACSR 6/1/3.35 mm sq. ON STEEL POLES (0.780 KM) |
97 | ACSR 6/1/3.35 (55mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} |
98 | Prov. Steel tubular poles. 9mtrs |
99 | Muff for steel tubular pole (2000mm long) with concrete filling |
100 | Cross Arm: [Channel Iron (100x50x6 mm), Length 1270 mm (i/c tolerence of 100mm either side) x2 structure( Run Through structure (Formation Tringle) |
101 | Angle Iron (50x50x5 mm), Length (2x750) mm x 1 structures (Run Through structure (Formation Tringle) |
102 | Pole Top Bracket [MSCI:100x50x6mm-100mm] |
103 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure (Run Through structure (Formation Tringle) |
104 | Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.]for Dead End Structures |
105 | X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.] for Dead End Structures |
106 | X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]for Dead End Structures |
107 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)for Dead End Structures |
108 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure for Dead End Structures |
109 | Stay set complete in all respect ( Single Pole-1No. , /D. Pole Structures-4Nos.) |
110 | Stay Wire (7/3.15 mm) (8.0 kg Per Stay Set) |
111 | HT earthing set complete (REC Constr. Standared J-1) |
112 | Single Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m |
113 | Eye Hook for earth wire |
114 | Earth Wire Clamp |
115 | MS Chanel Iron 75x40x6mm, length: 2400mm for road crossing/G.O Switch |
116 | Half clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) |
117 | Full clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) |
118 | Danger Plate (250X200X1.6 mm) |
119 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
120 | Barbed wire (REC Sp F 3/1981) |
121 | G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type |
122 | Alluminium Paint |
123 | Supply Part of CT/PT Unit |
124 | Prov. 11KV CT-PT unit i.e. PT (1 unit, 11KV/110V):CT (3No.10-400/500A) accuracy class 0.5S. |
125 | Prov, Energy meter (3 phase, 4 wire) HT CT type for Above |
126 | Pvc Multistrand 4 mm Sq. copper wire with 1 inch GI pipe fir concealing |
127 | X-Arm: [Channel Iron (100x50x6 mm), Length : 460 mm X 2 Nos] for supporting main channel for CT-PT unit |
128 | CT-PT Unit Belting and Knee Bracing |
129 | MS Angle Iron (50x50x5 mm), Length : 2800mmx 4 Nos. |
130 | MS Angle Iron (35x35x5 mm), Length : 2800mmx 2 Nos. |
131 | Half clamp (MS Flat 50x6 mm) |
132 | Full clamp (MS Flat 50x6 mm) |
133 | Nut & Bolts off size |
134 | Aluminium Thimble |
135 | copper Thimble |
136 | Erection Part of CT/PT Unit |
137 | Prov. 11KV CT-PT unit i.e. PT (1 unit, 11KV/110V):CT (3No.10-400/500A) accuracy class 0.5S. |
138 | Prov, Energy meter (3 phase, 4 wire) HT CT type for Above |
139 | Pvc Multistrand 4 mm Sq. copper wire with 1 inch GI pipe fir concealing |
140 | X-Arm: [Channel Iron (100x50x6 mm), Length : 460 mm X 2 Nos] for supporting main channel for CT-PT unit |
141 | CT-PT Unit Belting and Knee Bracing |
142 | MS Angle Iron (50x50x5 mm), Length : 2800mmx 4 Nos. |
143 | MS Angle Iron (35x35x5 mm), Length : 2800mmx 2 Nos. |
144 | Half clamp (MS Flat 50x6 mm) |
145 | Full clamp (MS Flat 50x6 mm) |
146 | Nut & Bolts off size |
147 | Aluminium Thimble |
148 | copper Thimble |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail