Tender For Supply Of Equipment / Material , Design, Erection, Testing Commissioning For Sop To D.R.D.A. For Fish Feed Unit At Maredi By Prov. 11/.4 Kv 25 Kva S/Stn. A/W 11 Kv Ht Line Section Maredi Under Esd Chamba-Ii Ed Chamba

Sharing tender

Tender For Supply Of Equipment / Material , Design, Erection, Testing Commissioning For Sop To D.R.D.A. For Fish Feed Unit At Maredi By Prov. 11 / .4 Kv 25 Kva S / Stn. A / W 11 Kv Ht Line Section Maredi Under Esd Chamba-Ii Ed Chamba--- 1 Supply part of 11/.4 KV 25 KVA DISTRIBUTION SUB STATION 2 11/.4 KV 25KVA DTR (REC Sep. ord 11/1976 3 Prov. ST PolePole 10 Mtr. Long W/L 200 Kgs 4 Muff for steel tubular pole with concrete filling 5 X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line 6 MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LAs ) 7 X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch 8 X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for transformer bed 9 X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer] 10 MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No. 11 MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos 12 MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing 13 MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos for Transformer LT Distribution Box and G.O switch fixing assembly 14 MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos for Transformer LT Distribution Box and G.O switch fixing assembly 15 G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm for Transformer LT Distribution Box and G.O switch fixing assembly 16 G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type 17 D.O Fuse unit 18 Surge Arrester, 9 kV Station Class 19 Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.) 20 Stay set complete 21 Staywire (7/3.15mm)( 10 Kg per stay set) 22 Pipe earthing with GI,Charcoal & Salt 23 Prov. LT distribution panel with MCCB (10 A, 10 KA, 4P,1 No.) & SFU (32 A 4 No. rewireble) for 63 KVA Trf. as per specification 24 Half clamp (M.S. Flat 50x6) 25 Full clamps (M.S. Flat 50x6) 26 M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) 27 Aluminium Thimbles 28 Copper Thimble 29 Danger Plate 30 Barbed wire (REC Sp F 3/1981) 31 LT Cable 3-1/2 core-185mm sq. 32 Alluminium Paint 33 Prov.ACSR, 6/1/3.35 mm 34 Prov.63KVA S/Stn structure protection a/w Chain link fencing, Angle iron Gate etc. for DTR Fencing. 35 Erection part of 11/.4 KV 25 KVA DISTRIBUTION SUB STATION 36 11/.4 KV 25KVA DTR (REC Sep. ord 11/1976 37 Prov. ST PolePole 10 Mtr. Long W/L 200 Kgs 38 Muff for steel tubular pole with concrete filling 39 X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line 40 MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LAs ) 41 X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch 42 X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for transformer bed 43 X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer] 44 MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No. 45 MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos 46 MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing 47 MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos for Transformer LT Distribution Box and G.O switch fixing assembly 48 MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos for Transformer LT Distribution Box and G.O switch fixing assembly 49 G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm for Transformer LT Distribution Box and G.O switch fixing assembly 50 G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type 51 D.O Fuse unit 52 Surge Arrester, 9 kV Station Class 53 Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.) 54 Stay set complete 55 Staywire (7/3.15mm)( 10 Kg per stay set) 56 Pipe earthing with GI,Charcoal & Salt 57 Prov. LT distribution panel with MCCB (10 A, 10 KA, 4P,1 No.) & SFU (32 A 4 No. rewireble) for 63 KVA Trf. as per specification 58 Half clamp (M.S. Flat 50x6) 59 Full clamps (M.S. Flat 50x6) 60 M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) 61 Aluminium Thimbles 62 Copper Thimble 63 Danger Plate 64 Barbed wire (REC Sp F 3/1981) 65 LT Cable 3-1/2 core-185mm sq. 66 Alluminium Paint 67 Prov.ACSR, 6/1/3.35 mm 68 Prov.63KVA S/Stn structure protection a/w Chain link fencing, Angle iron Gate etc. for DTR Fencing. 69 Supply Part of HT LINE WITH ACSR 6/1/3.35 mm sq. ON STEEL POLES 0.150 KM) 70 ACSR 6/1/3.35 (55mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} 71 Prov. Steel tubular poles. 9mtrs 72 Prov. Steel tubular poles. 8mtrs 73 Muff for steel tubular pole (2000mm long) with concrete filling 74 Cross Arm: [Channel Iron (100x50x6 mm), Length 1270 mm (i/c tolerence of 100mm either side) x2 structure( Run Through structure (Formation Tringle) 75 Angle Iron (50x50x5 mm), Length (2x750) mm x 1 structures (Run Through structure (Formation Tringle) 76 Pole Top Bracket [MSCI:100x50x6mm-100mm] 77 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure (Run Through structure (Formation Tringle) 78 Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.]for Dead End Structures 79 X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.] for Dead End Structures 80 X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]for Dead End Structures 81 Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)for Dead End Structures 82 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure for Dead End Structures 83 Stay set complete in all respect ( Single Pole-1No. , /D. Pole Structures-4Nos.) 84 Stay Wire (7/3.15 mm) (9.0 kg Per Stay Set) 85 HT earthing set complete (REC Constr. Standared J-1) 86 Single Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m 87 Eye Hook for earth wire 88 Earth Wire Clamp 89 MS Chanel Iron 75x40x6mm, length: 2400mm for road crossing/G.O Switch 90 Half clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) 91 Full clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) 92 Danger Plate (250X200X1.6 mm) 93 M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) 94 Barbed wire (REC Sp F 3/1981) 95 G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type 96 Alluminium Paint 97 Erection Part of HT LINE WITH ACSR 6/1/3.35 mm sq. ON STEEL POLES (0.150 KM) 98 ACSR 6/1/3.35 (55mm²) {Includes 3 conductor lengths for 3F and Additional 1% (Sag, Jumpering and wastage} 99 Prov. Steel tubular poles. 9mtrs 100 Prov. Steel tubular poles. 8mtrs 101 Muff for steel tubular pole (2000mm long) with concrete filling 102 Cross Arm: [Channel Iron (100x50x6 mm), Length 1270 mm (i/c tolerence of 100mm either side) x2 structure( Run Through structure (Formation Tringle) 103 Angle Iron (50x50x5 mm), Length (2x750) mm x 1 structures (Run Through structure (Formation Tringle) 104 Pole Top Bracket [MSCI:100x50x6mm-100mm] 105 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure (Run Through structure (Formation Tringle) 106 Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.]for Dead End Structures 107 X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.] for Dead End Structures 108 X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]for Dead End Structures 109 Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)for Dead End Structures 110 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure for Dead End Structures 111 Stay set complete in all respect ( Single Pole-1No. , /D. Pole Structures-4Nos.) 112 Stay Wire (7/3.15 mm) (9.0 kg Per Stay Set) 113 HT earthing set complete (REC Constr. Standared J-1) 114 Single Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg. one road crossing @ 20 m and Additional 1% (Sag and wastage)} @ 0.102 kg/m 115 Eye Hook for earth wire 116 Earth Wire Clamp 117 MS Chanel Iron 75x40x6mm, length: 2400mm for road crossing/G.O Switch 118 Half clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) 119 Full clamp (on D/P dead end str:4Nos; on Run Through Str. 2Nos.) 120 Danger Plate (250X200X1.6 mm) 121 M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) 122 Barbed wire (REC Sp F 3/1981) 123 G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type 124 Alluminium Paint