Tender For Supply Of Equipment / Material, Design, Erection, Testing, Commissioning, Forproposed 1 No. Of 11/0.4 Kv, 630 Kva S/Stn For Ev Charging Station At Bus Stand Dehra Under Esd, Hpsebl,Dehra, kangra-Himachal Pradesh

Tender For Supply Of Equipment / Material, Design, Erection, Testing, Commissioning, Forproposed 1 No. Of 11 / 0.4 Kv, 630 Kva S / Stn For Ev Charging Station At Bus Stand Dehra Under Esd, Hpsebl, Dehra--- 1 11/0.4 KV 630KVA Distribution Sub Station 2 Prov.11/.4KV Distribution Transformer 630KVA 11/0.4KV Distribution Transformer O/D type conforming to ISI & BEE Specifications. Provided by HPSEBL 3 LT Distribution Panel fitted with Bakelite sheet 1000 Amp copper thimble ACB 1000 amp 3P 50kA-1 No. Make L&T/ Schneider/ ABB only, MCCB 400 Amp 50kA 3P of L&T Schneider and ABB make only -3 Nos 4 Design, Manufacture, Supply of approved OEM make Outdoor 11 kV 3 Way RMU, ( 2 Load Breaker Swicthes+1 VCB) SF6 insulated, 1000 Amps, 21KA for 3 Sec. , BIL 75 KV peak, suitable CT with microprocessor based numerical over current relay (IDMT+Inst.) for protection provided with VCB , fully motorised operationalalongwith 11 KV HT Metering equipments, Trench, Cable Termination Kits (06 No. Touch Proof), fencing etc., complete in all respect. Make of RMU - ABB/Schneider/Siemens/L&T/Reputed make alreadyapproved by HPSEBL.Ring main unit consisting of copper busbar in SF6 insulated,alongwith right angle boot Touch Proof termination Kits, All isolators should have communicable FPI with LED digital display to detect E/F & O/C, surge arrestors.Auxillary PT, Battery Charger etc. for motorised operation of RMU to be provided. All the necessary wirings and space for FRTU to be given along with RMU for future compatibility with SCADA system (Supply of FRTU is not in scope).Mandatory Pre-commissioning test to be conducted at site under supervision of OEM are listed below: (a) MV side - Measurement of Insulation Resistance, High Voltage Test, Relay Test through primary current test kit(b) Earth pit - Earth resistance(c) Tightness of cable through Torque wrench onlyContractor shall provide and supply all Tools & Tackles set with each RMU to HPSEBL (Touch Proof termination Kit Torque Wrench, Top Tool Socket Set(8mm to 32mm),Hand Operated Crimping tool set (25-400mm) with die set, Cable stripping tool, D-Spanner Set, Allen Key Set , Screw Driver Socket Set, Cutting Plier, Cable Knife, Hand Drill, Make :Taparia/Top Tool/Stanley/Bosh., LPG Gas Blow Lamp, 5Kg LPG Cylinder etc.)Battery operated HT Megger 11KV, Battery operated LT Megger (0-1000V) , Battery Operated Earthing Tester (Make: Mecco/ Rishabh) Clamp meter (Make: Mecco/ Rishabh)and other tools & Tackles which will be used at site for erection, testing and Commissioning of all equipments.These tools and tackles shall be handed over to Engineer-In Charge and shall not be taken away. 5 Prov. XLPE cable single 3*185mm2 (one spare) Provided by HPSEBL 6 Prov. XLPE armed cable 1000mm2 from transformer to LT Panel Provided by HPSEBL 7 Transformer Bed around DTR & RMU structure complete in all respect 8 Chain link fencing, angle iron gate for the transformer fencing 9 Add TPT Charges 10 Add Erection Charges 11 11 KV HT Line 12 Prov. ACSR 6/1/4.72(100mm2)Provided by HPSEBL 13 Prov. ST Pole 11 MtrLong ISI marked Swaged Steel Tubular Pole as per IS 2713/1980 (Part-A) as ammended time to time a/w cap welded on top and Cast Iron Base Plate of designation 410-SP-47. Provided by HPSEBL 14 Prov. RCC Muff with concerete filling 15 Run Thro Structures( ?Formation): on Single pole structures 16 Prov.X-arm-Channel Iron 100x50x6,Length 1270mm i/c tolerance of 100 mm either side) x 8 Str. 17 Prov.Angle Iron 50x50x6,Length 750mmx2 No. x 8 Str.) 18 Prov. Pole Top Bracket (MSCI:100x50x6 mm- 100 mm) 19 Prov. 11 KV Pin Insulators (Porcelain,12kV,10 KN): 3 No per str.Provided by HPSEBL 20 Dead End Structures: on Double pole structures 21 Prov.Belt Set -MS Angle Iron 50x50x6,Length(1800mmx2 No.) 22 Prov. X- Bracing Set MS Angle Iron 50x50x6,Length(2125mmx2 No.) 23 Prov.X-arm ( Horizontal) -MS Channel Iron 100x50x6,Length 2340mm x 2 Nos. (?Formation) 24 Prov. Disc Insulator Sets on Dead End Str.(comprising 1 No. Disc: (Porcelain,BS,12 KV,90 kN) incl Dead End Clamps etc.) x (3 Nos. cond) x (2 No. sides) Provided by HPSEBL 25 Prov. 11 KV Pin Insulators (Porcelain,12kV,10 KN): 3 No per str. Provided by HPSEBL 26 HT Stay / Guy Arrangement 27 Prov. Stay Set Complete in all respect(1 No./Single Pole, 4 No./double pole Str 28 Prov. Stay Wire(7/3.15 mm) Provided by HPSEBL 29 Earthing 30 Prov. HT Earthing set complete 31 Prov. Single continous Earth wire (G.I,8 SWG) 32 Prov. Eye Hook for earth wire 33 Prov. Earth wire clamp Provided by HPSEBL 34 Prov.MS C.I. (75X40X6),Length 2400mm for Road crossing 35 Prov.Half Clamps 36 Prov. Full Clamps 37 Prov. Danger Plate (250X200X1.6mm) 38 Prov. M.S. Nuts And Bolts Off Sizes 39 Prov. Barbed Wire 40 Prov. Red Oxide 41 Prov. Aluminium Paint 42 AddTransportation Charges 43 AddErection Charges 44 Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	27-Mar-2023	SEOP-53/2022-23	Technical Bid	01-04-2023

INR 1180 /-

INR 23940.0 /-

INR 23.93 Lakhs /-

Name of Work:Tender for Supply of equipment / material, design, erection, testing, commissioning, forproposed 1 No. of 11/0.4 KV, 630 KVA S/Stn for EV Charging Station at Bus Stand Dehra under ESD, HPSEBL,Dehra.

Sl. No.	Item Description
1	11/0.4 KV 630KVA Distribution Sub Station
2	Prov.11/.4KV Distribution Transformer 630KVA 11/0.4KV Distribution Transformer O/D type conforming to ISI & BEE Specifications. Provided by HPSEBL
3	LT Distribution Panel fitted with Bakelite sheet 1000 Amp copper thimble ACB 1000 amp 3P 50kA-1 No. Make L&T/ Schneider/ ABB only, MCCB 400 Amp 50kA 3P of L&T Schneider and ABB make only -3 Nos
4	Design, Manufacture, Supply of approved OEM make Outdoor 11 kV 3 Way RMU, ( 2 Load Breaker Swicthes+1 VCB) SF6 insulated, 1000 Amps, 21KA for 3 Sec. , BIL 75 KV peak, suitable CT with microprocessor based numerical over current relay (IDMT+Inst.) for protection provided with VCB , fully motorised operationalalongwith 11 KV HT Metering equipments, Trench, Cable Termination Kits (06 No. Touch Proof), fencing etc., complete in all respect. Make of RMU - ABB/Schneider/Siemens/L&T/Reputed make alreadyapproved by HPSEBL. Ring main unit consisting of copper busbar in SF6 insulated,alongwith right angle boot Touch Proof termination Kits, All isolators should have communicable FPI with LED digital display to detect E/F & O/C, surge arrestors.Auxillary PT, Battery Charger etc. for motorised operation of RMU to be provided. All the necessary wirings and space for FRTU to be given along with RMU for future compatibility with SCADA system (Supply of FRTU is not in scope). Mandatory Pre-commissioning test to be conducted at site under supervision of OEM are listed below: (a) MV side - Measurement of Insulation Resistance, High Voltage Test, Relay Test through primary current test kit (b) Earth pit - Earth resistance (c) Tightness of cable through Torque wrench only Contractor shall provide and supply all Tools & Tackles set with each RMU to HPSEBL (Touch Proof termination Kit Torque Wrench, Top Tool Socket Set(8mm to 32mm),Hand Operated Crimping tool set (25-400mm) with die set, Cable stripping tool, D-Spanner Set, Allen Key Set , Screw Driver Socket Set, Cutting Plier, Cable Knife, Hand Drill, Make :Taparia/Top Tool/Stanley/Bosh., LPG Gas Blow Lamp, 5Kg LPG Cylinder etc.)Battery operated HT Megger 11KV, Battery operated LT Megger (0-1000V) , Battery Operated Earthing Tester (Make: Mecco/ Rishabh) Clamp meter (Make: Mecco/ Rishabh)and other tools & Tackles which will be used at site for erection, testing and Commissioning of all equipments.These tools and tackles shall be handed over to Engineer-In Charge and shall not be taken away.
5	Prov. XLPE cable single 3*185mm2 (one spare) Provided by HPSEBL
6	Prov. XLPE armed cable 1000mm2 from transformer to LT Panel Provided by HPSEBL
7	Transformer Bed around DTR & RMU structure complete in all respect
8	Chain link fencing, angle iron gate for the transformer fencing
9	Add TPT Charges
10	Add Erection Charges
11	11 KV HT Line
12	Prov. ACSR 6/1/4.72(100mm2)Provided by HPSEBL
13	Prov. ST Pole 11 MtrLong ISI marked Swaged Steel Tubular Pole as per IS 2713/1980 (Part-A) as ammended time to time a/w cap welded on top and Cast Iron Base Plate of designation 410-SP-47. Provided by HPSEBL
14	Prov. RCC Muff with concerete filling
15	Run Thro Structures( ?Formation): on Single pole structures
16	Prov.X-arm-Channel Iron 100x50x6,Length 1270mm i/c tolerance of 100 mm either side) x 8 Str.
17	Prov.Angle Iron 50x50x6,Length 750mmx2 No. x 8 Str.)
18	Prov. Pole Top Bracket (MSCI:100x50x6 mm- 100 mm)
19	Prov. 11 KV Pin Insulators (Porcelain,12kV,10 KN): 3 No per str.Provided by HPSEBL
20	Dead End Structures: on Double pole structures
21	Prov.Belt Set -MS Angle Iron 50x50x6,Length(1800mmx2 No.)
22	Prov. X- Bracing Set MS Angle Iron 50x50x6,Length(2125mmx2 No.)
23	Prov.X-arm ( Horizontal) -MS Channel Iron 100x50x6,Length 2340mm x 2 Nos. (?Formation)
24	Prov. Disc Insulator Sets on Dead End Str.(comprising 1 No. Disc: (Porcelain,BS,12 KV,90 kN) incl Dead End Clamps etc.) x (3 Nos. cond) x (2 No. sides) Provided by HPSEBL
25	Prov. 11 KV Pin Insulators (Porcelain,12kV,10 KN): 3 No per str. Provided by HPSEBL
26	HT Stay / Guy Arrangement
27	Prov. Stay Set Complete in all respect(1 No./Single Pole, 4 No./double pole Str
28	Prov. Stay Wire(7/3.15 mm) Provided by HPSEBL
29	Earthing
30	Prov. HT Earthing set complete
31	Prov. Single continous Earth wire (G.I,8 SWG)
32	Prov. Eye Hook for earth wire
33	Prov. Earth wire clamp Provided by HPSEBL
34	Prov.MS C.I. (75X40X6),Length 2400mm for Road crossing
35	Prov.Half Clamps
36	Prov. Full Clamps
37	Prov. Danger Plate (250X200X1.6mm)
38	Prov. M.S. Nuts And Bolts Off Sizes
39	Prov. Barbed Wire
40	Prov. Red Oxide
41	Prov. Aluminium Paint
42	AddTransportation Charges
43	AddErection Charges
44	Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart. Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site.