Tender For C/O Portable Puf Panel Cabin Of Ms Structure Frame 02 Nos Jawan Barrack And 01 No Sos And 01 No Toilet Block At Dafa Of 18 Bn Bsf Bhuj Under Shq Bsf Bhuj
Tender Value
68.70 Lakhs
Estimated cost
Bid Submission
28 Mar 2023
0 days left
EMD
1.37 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhuj → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Portable Puf Panel Cabin Of Ms Structure Frame 02 Nos Jawan Barrack And 01 No Sos And 01 No Toilet Block At Dafa Of 18 Bn Bsf Bhuj Under Shq Bsf Bhuj
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 25%). |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting , bending, placing in position and binding all complete upto plinth level.Hard drawn steel wire |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 7 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 8 | Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to themembrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. |
| 9 | Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0 mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @ 3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per direction of Engineer-in-charge. |
| 10 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes |
| 11 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 12 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 13 | Providing & Fixing of PORTABLE PUF PANEL CABIN size: 40 X 10 X 10 TM.S.STRUCTURE FRAME:The M.S. Structure material Like column , Base frame,Supported Runner & Top frame etc. shall be made out with Combination of Rolled / Folded Section / Tube Section and are as per IS & branded like, Jindal /Essar / Indian /National /Apollo /Asian /Tata.FLOOR:The floor shall be made with 18mm thick Cement sheet. The sheet shall be covered with 1 mm thick PVC vinyl flooring PUF INSULATED WALL & ROOF:The 60 mm thick insulated walls shall be made of Sandwich panels. The sandwich panels shall be made out of 3 mm thick Phenolic sheet outer side & 2mm thick inner side phenolic sheet 100% water proof DOOR:NOS.-1 The double door shall be made out same as wall material.VENTILATION SYSTEM :8 nos of aluminum powder coated sliding window FURNITURE: 08 nos of individual beds fabricated with ms channel/pipe and 4 x1.5 x4 cupboard 2 nos provided ELECTRIFICATION : The Unit shall be completed with all the electrical fittings with Casing Capping System on Wall AC point given. 8 nos of fan and 8 nos of Tube light given (2 nos of 1.5 ton AC provided) SLOPE & VERANDAH: 30 degree both side slope with one side of 4 ft extra for verandah. CEILLING: 30 mm thick thermocole covered with 2 mm thick phenolic sheet. Supplying of material upto site their own cost and work should be as per direction of engg incharge. |
| 14 | Providing and fixing CBS TECHNOLOGIES 4 - seater modular toilet with each cubicle of size 915mm X 915mm x 1980mm and with Sludge tank (capacity-2000ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10- seater), overhead tank(Capacity 500Ltrs),Sludge tank (capacity-2000ltrs),Door frame material 50mm X 25mm of 14-16gauge rectangular MS hollow pipe,size of each cubical(LXWXH) ± 25mm915mm X 915mm x 1980mm, size of each cubical(LXWXH) ± 25mm 915mm X 915mm x 1980mm,Wash basin material made of FRP(fiber reinforced plastic),WC material made of SS 304,Towel rail/ring made of SS 304 including all fitting of plumbing side. |
| 15 | Providing and fixing 0.50 HP Tullu pump for water supply to water storage tank complete as per direction of Engineer-in-charge. |
| 16 | Providing and fixingPVC pipes(6kg pressure) including all PVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 110 mm nominal dia Pipes |
AI Tender Summary
Tender Timeline
Mar 21, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMar 28, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 29, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender