|
| 1 | PART-ASupply delivery at site of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification : DISCHARGE:30 cubic mtr./Hr.HEAD :53 Mtr.*N.B. (A) H/Q characteristic curve*N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery.(B) Test Certificate of pump & motor should be submitted during delivery. |
| 2 | DISCHARGE:30 cubic mtr./Hr.HEAD :53 Mtr.*N.B. (A) H/Q characteristic curve*N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery.(B) Test Certificate of pump & motor should be submitted during delivery. |
| 3 | Supply delivery at site of 4 Sq. mm. 3 core, water proof flat copper cable as per specification of NIT N.B:- Cable should be supplied as per site requirement. |
| 4 | Supply delivery at site of 1.1 Kv Grade 25 sq. mm. 3-1/2core XLPE insulated Al .Ar. Armoured cable as per specification of NIT .N.B:- Cable should be supplied as per site requirement. |
| 5 | Supply delivery at site of 1.1 Kv Grade 12 core, 2.5 Sq. mm. Armoured copper control cableas per specification of NIT.N.B:- Cable should be supplied as per site requirement. |
| 6 | Supply delivery at site of 100 Amp Kit-kat rewirable porcelain fuse unit (both base and bridge)as per specification of NIT |
| 7 | Supply delivery at site of 100 Amp. TPN, 415V, main switch with rewireable type fuse link in sheet steel enclosure.as per specification of NIT |
| 8 | Supply delivery at site of 100 Amps.4 way wall mounted Bus-Bar chamber having 4 Nos. Copper Bus-Bar.as per specification of NIT |
| 9 | Supply delivery fitting fixing of 100 Amp. 4 pole off load change over switch. |
| 10 | Supply & delivery at site 2 mm thick CRCAsheet steel enclosed type Indoor wall Mounted415 V MCC cum PDB Panel having required Feeders wih PLC as per specification of NIT (7.5 HP to 12.5HP) |
| 11 | Supply and delivery at site of80 mm dia 3 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per specification of NIT |
| 12 | Supply and delivery at site of80 mm dia 1.5 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per specification of NIT |
| 13 | Supply and delivery at site of 80mm dia CI top & bottom adopter and as per specification of NIT |
| 14 | Supply and delivery at site of Heavy type suitable dia MS suspension clamp along with nuts bolts and washer and as per specification of NIT |
| 15 | Supply and delivery at site of Three Phase actuator operated wafer type butterfly valve PN-1.0 rating of norminal dia 80mm. and as per specification of NIT |
| 16 | Supply and delivery at site of 80mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90° bend-2 nos. CI flanged tee- 1 no., CI flanged short piece -2nos ,flangeetc. and as per specification of NIT |
| 17 | Supply and delivery at site of Heavy type 250mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry and as per specification of NIT |
| 18 | Supply and delivery at site ofPressure gauge [Make- H. Guru/Febig] 102 mm. dia [0-7 kg/Sq.cm] brass cock and fitting complete [ This cost includes 15 mm. dia G.I. pipes and specials] |
| 19 | Supply and delivery at site of Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials. |
| 20 | Supply delivery at site of Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump [This cost includes 15 mm. dia G.I. pipes and specials |
| 21 | Earthing and lighting protection for pump house and electrical installation as per ISS and IE rules and as per technical specification of NIT |
| 22 | Supply delivery at site and storage of illumination arrangement like suitable size wire, switch ,switch board ,tube light fittingLED outdoor fixturecomplete as per specification of NIT. |
| 23 | Supply & delivery at sites chair,table,Celing Fan,wooden board, Kiox Box as per specification of NIT |
| 24 | Supply & delivery at site of suitable capacity Power correction arrangement as per Specification of NIT.(15 KVA) |
| 25 | Supply delivery at site and storage of Disinfection arrangement with Flow rate 100 LPH as per specification of NIT. |
| 26 | PART-BInstallation of above Supplied items vide Sl(1-25 ) in PART -A including cost of construction of foundation of chlorine machine, valve support out door light by the 40 mm dia G.I. Arm. Fabrication of M.S. Structure , grouting, cost of welding, fitting fixing of new valves, and connecting to main delivery line througth underground pipe laying etc inicluding supplying of all necessary meterials viz rubber gasket, nut & bolts, rubber mat of suitable size & thikness including painting by synthetic enamel paint at part of rising main, valves etc after removing of old paint by scrapping & cleaning to complete the jobs in all respect as per tecnical specification and as per direction of E.I.C. |
| 27 | Painting of the installation (viz.pumps,valves, pipe lines etc.by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per NIT specifiaction & direction of EIC. |
| 28 | Testing & Commissioning of the entire installation i.e.Pumps, Motors,valves etc. as in PART A of (Sl no. 1 to 25) as per direction and to the entire satisfaction of E.I.C. |
| 29 | Operation &guarding of the pumping machinery with full satisfaction of EIC (90days x 02 nos Tube well) = 180Days. |
| 30 | Add GST @18% |
