Water Resources Department-WRD has published Tender For Construction Of Pcc Road, Plantation Work With Priservation Of Plant For One Year In New Smp Colony, Adityapur.. Submission Date for this Tender is 27-03-2023. Road Work Tenders in adityapur Jharkhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantling pucca brick or lime workincluding stacking servicable materials within 15 M. lead and disposal of unservicable materials with all leads all complete as per direction of E/I (BCD- 5.10.1) |
2 | Earthwork in excavation in foundation trenches in ordinary soil (wide classification of soil item - A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I. 5.1.1 BCD |
3 | Extra for earth work in hard soil as per specification and direction of E/I. (Vide classification of soil item -B) 5.1.2 BCD |
4 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including" cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).5.1.10BCD |
5 | Providing designation 75Bbrick on flate soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. 5.6.3 BCD |
6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. 1:2:4 (1 cement :2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size ) 5.3.1.2 BCD |
7 | Providing designation 75 A brick work in C.M (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction E/I.(BCD-5.2.3) |
8 | Providing and laying in position specified grade of reinforced cement concrete excludingcost of centering shuttering ,finishing and reinforcement All work upto plinth level 1:2:4(1 cement:2 coarse sand(Zone III): 4 graded stone aggregate of 20 mm nominal size. 5.3.9.2 BCD |
9 | Reinforced cement concrete in walls ,(any thickness) including attached plasters, buttresses,plinth and string courses, fillets columns, pillars, piers, abutments posts and struts etc above plinth level upto floor five level excluding cost of centering shuttering ,finishing and reinforcement 1:1.5:3(1 cement:1.5 coarse sand(Zone III): 3 graded stone aggregate of 20 mm nominal size. 5.3.10 BCD |
10 | provioing designation 75A brick work in C M ( 1:4 ) in superstructure with approved quality of clean coarse sand of F.M.2 to 2.5 including providing "10mm thick mortar joints,costs of screening, materials, scaffolfing. raking out joints to 15 mm depth curing, taxes and royalty all comptete as per building specification and direction of E/|.5.2.10 BCD |
11 | Providing 12 mm thick CP(1:4) with clean coarse sand of FM1.5 including screening curing with all leads and lifts of water ,scaffoldng taxes and royalty all complete as per building specfication and direction of E/I.5.7.2 |
12 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surfirce smooth with sand paper, scaffolding, curtng and taxes all complete as per building specification and directron of E/l. 5.8.24 BCD |
13 | Centering and shuttering including strutting propping etc and removal of form for Foundations footings bases of columns etc for mass concrete. 5.3.17.1 |
14 | Centering and shuttering including strutting propping etc and removal of form for columns,pillars piers,abutments posts and struts etc for mass concrete.5.3.17.6 |
15 | Providing Tor Steel reinforcement of 8mm dia rods as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position (excluding carriage of bars to work site)all completeas per building specification and direction of E/I TMTFe 500 {only valid for SAIL and TATA Tiscon, JSPL, Electrosteel, Steels LTd.Bokaro and Vizag (RINL)} (BCD-5.5.4) |
16 | Providing Tor steel reinforcement of 1Omm, 12mm& 16 mm dia bars as per approved design and drawing 5.5.5a BCD |
17 | 12 mm (TMT coil Fe 500) (Only valid for SAIL & TATA Steel, JSPL,and Vizag Steel) 5.5.5b BCD |
18 | Providng 250 mm wide brick drain in cement mortar(1:6) with av 150 mm clear depthand 250 mm apron including cost of earthworkinvolved with 75 mm cement concrete(1:4:3) over one brick designation 75 A Flat soling in proper gradeand slope at the base,the drain fully plastered in CM(1:3)with punning over exposed surface all complete as per building specification and direction of E/I.5.10.33 |
19 | Providing 1.2 meter high fencing with angle iron posts 50 mm X 50mm X 6 mm at 3 meterr center to center with .40 meter embeded in15 grade cement concrete, corner end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50 mm or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respect. (8.19 R.C.D) |
20 | Supplying,frtting and fixing M.S. grill made of 20x6cmm M.S. flat as per approved design and drawing, properly fabrlcated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/1. (where materials is not supplied by the deptt.) 5.5.12 |
21 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of Eil. (5.8.45) |
22 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in bullding specification). (5.8.41) |
23 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR 2.32) |
24 | Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.DSR2.36 |
25 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.(16.91.1) |
26 | 16.93 Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.(16.93) |
27 | 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).(16.69) |
28 | Fillingh in foundation trenches and plinth in layers . Not exceed 150mm thick well watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m and lift of 1.5 m all complete as per building specification and direction of E/I (5.1.7) |
29 | Planting of treesand their maimtenance for one year(planting of treesby road side (avenue trees) in 0.60m dia holes , 1 m deep dug in ground…) (11.09 RCD) |
30 | Carriage of materials |
31 | Cement (2 km Pucca) |
32 | Loading & unloading |
33 | Cost of Haulage on surface road |
34 | Sand (5 km Pucca) |
35 | Loading & unloading |
36 | Cost of Haulage on surface road |
37 | Stone chips(35 km Pucca) |
38 | Loading & unloading |
39 | Cost of Haulage on surface road |
40 | Bricks ( No.) (8 km Pucca) |
41 | Loading & unloading |
42 | Cost of Haulage on surface road |
43 | Steel (2 km Pucca) |
44 | Loading & unloading |
45 | Cost of Haulage on surface road |
46 | Add GST @18% |
47 | Add Labour Cess @1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail